Strainburst Control in Deep Tunnels Using a Slotted Excavation Method
Publication: International Journal of Geomechanics
Volume 22, Issue 4
Abstract
Strainburst is the most common type of rockburst in deep excavations, which sometime result in heavy losses. This research studies the feasibility of a conceptualized destressing method for strainburst control. In this method, the rock is destressed by cutting slots at the excavation boundary. First, a circular tunnel is modeled and the stress distribution around the tunnel is calculated. In a separate model, a slot is added to the tunnel wall. Results show that when the slot is added to the model, the rock at the tunnel wall destresses, and the stress concentration zone transfers to a distance farther away from the wall. Also, the analysis of the failure zone around the tunnel and the velocities of the failed element nodes show that the failure in the slotted tunnel is less violent compared with the tunnel without the slot. Secondly, a parametric study is conducted to find the optimum dimensions of the slot. Finally, the rockburst damage in Jinping II drainage tunnel is simulated and then the application of the proposed destressing method for strainburst prevention in this tunnel is studied. Comparison of the modeling results with the field rockburst observations of the drainage tunnel shows that the proposed destressing method can be considered as a potential tool for strainburst control in deep excavations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial supports received from the Jiangxi University of Science and Technology [Fund No. 205200100469], the Distinguished Foreign Expert Talent Program Funding, and the National Natural Science Foundation of China [Fund No. 51604126] are gratefully acknowledged.
References
Blake, W., and D. G. Hedley. 2003. Rockbursts: Case studies from North American hard-rock mines. Littleton, CO: Society for Mining, Metallurgy, and Exploration.
Braeuner, G. 1994. Rockbursts in coal mines and their prevention. London: Routledge.
Cai, M. 2013. “Principles of rock support in burst-prone ground.” Tunnelling Underground Space Technol. 36: 46–56. https://doi.org/10.1016/j.tust.2013.02.003.
Collettini, C. 2011. “The mechanical paradox of low-angle normal faults: Current understanding and open questions.” Tectonophysics 510 (3–4): 253–268. https://doi.org/10.1016/j.tecto.2011.07.015.
Cook, N. G. W. 1966. “The design of underground excavations.” In Proc., 8th US Symp. on Rock Mechanics. Houston: American Rock Mechanics Association. paper number: ARMA-66-0167.
Cruz, F., D. Roehl, and E. Vargas. 2019. “An XFEM implementation in Abaqus to model intersections between fractures in porous rocks.” Comput. Geotech. 112: 135–146. https://doi.org/10.1016/j.compgeo.2019.04.014.
Durrheim, R., M. K. C. Roberts, A. T. Haile, T. O. Hagan, A. J. Jager, M. F. Handley, S. M. Spottiswoode, and W. D. Ortlepp. 1998. “Factors influencing the severity of rockburst damage in South African gold mines.” J. South Afr. Inst. Min. Metall. 98: 53–58.
Durrheim, R. 2010. “Mitigating the risk of rockbursts in the deep hard rock mines of South Africa: 100 years of research.” In Extracting the science: A century of mining research, edited by J. Brune, 156–171. Littleton, CO: Society for Mining, Metallurgy, and Exploration.
Fakhimi, A., O. Hosseini, and R. Theodore. 2016. “Physical and numerical study of strain burst of mine pillars.” Comput. Geotech. 74: 36–44. https://doi.org/10.1016/j.compgeo.2015.12.018.
Garvey, R. J. 2013. “A study of unstable rock failures using finite difference and discrete element methods.” Ph.D. thesis, Mining & Earth Systems Engineering, Colorado School of Mines.
Gibowicz, S. J., and S. Lasocki. 1997. “Rockbursts and seismicity in mines.” In Proc., 4th Int. Symp. on Rockbursts and Seismicity in Mines, Rotterdam, Netherlands: A.A. Balkema.
Gu, R., and U. Ozbay. 2015. “Numerical investigation of unstable rock failure in underground mining condition.” Comput. Geotech. 63: 171–182. https://doi.org/10.1016/j.compgeo.2014.08.013.
Guo, W.-Y., T.-B. Zhao, Y.-L. Tan, F.-H. Yu, S.-C. Hu, and F.-Q. Yang. 2017. “Progressive mitigation method of rock bursts under complicated geological conditions.” Int. J. Rock Mech. Min. Sci. 96: 11–22. https://doi.org/10.1016/j.ijrmms.2017.04.011.
He, B.-G., R. Zelig, Y. H. Hatzor, and X.-T. Feng. 2016. “Rockburst generation in discontinuous rock masses.” Rock Mech. Rock Eng. 49 (10): 4103–4124. https://doi.org/10.1007/s00603-015-0906-8.
Heal, D. 2010. “Observations and analysis of incidences of rockburst damage in underground mines.” Ph.D. thesis, School of Civil & Resources Engineering, Univ. of Western Australia.
Imseeh Wadi, H., and A. Alshibli Khalid. 2021. “Influence of micro- and crystalline-scale properties on the fracture of silica sand particles using 3D finite-element analysis.” Int. J. Geomech. 21 (9): 04021154. https://doi.org/10.1061/(asce)gm.1943-5622.0002117.
Jiang, Q., X.-T. Feng, T.-B. Xiang, and G.-S. Su. 2010. “Rockburst characteristics and numerical simulation based on a new energy index: A case study of a tunnel at 2,500 m depth.” Bull. Eng. Geol. Environ. 69 (3): 381–388. https://doi.org/10.1007/s10064-010-0275-1.
Kaiser, P. 1993. “Keynote address: Support of tunnels in burst-prone ground—toward a rational design methodology.” In Rockbursts and seismicity in mines, edited by R. P. Young, 13–27. Rotterdam, Netherlands: A.A. Balkema.
Kaiser, P. K. 1996. Canadian rockburst support handbook. Sudbury, Canada: Geomechanics Research Centre.
Kaiser, P. K., and M. Cai. 2012. “Design of rock support system under rockburst condition.” J. Rock Mech. Geotech. Eng. 4 (3): 215–227. https://doi.org/10.3724/SP.J.1235.2012.00215.
Kang, H., H. Lv, F. Gao, X. Meng, and Y. Feng. 2018. “Understanding mechanisms of destressing mining-induced stresses using hydraulic fracturing.” Int. J. Coal Geol. 196: 19–28. https://doi.org/10.1016/j.coal.2018.06.023.
Kias, E., and U. Ozbay. 2013. “Modeling unstable failure of coal pillars in underground mining using the discrete element method.” In Proc., 47th US Rock Mechanics/Geomechanics Symp. Paper number: ARMA-2013-174. Alexandria, VA: American Rock Mechanics Association (ARMA).
Konicek, P. 2018. “Chapter 14 - Destressing.” In Rockburst, edited by X.-T. Feng, 453–471. Oxford, UK: Butterworth-Heinemann.
Konicek, P., K. Soucek, L. Stas, and R. Singh. 2013. “Long-hole destress blasting for rockburst control during deep underground coal mining.” Int. J. Rock Mech. Min. Sci. 61: 141–153. https://doi.org/10.1016/j.ijrmms.2013.02.001.
Li, G., W. Wang, Z. Jing, L. Zuo, F. Wang, and Z. Wei. 2018. “Mechanism and numerical analysis of cutting rock and soil by TBM cutting tools.” Tunnelling Underground Space Technol. 81: 428–437. https://doi.org/10.1016/j.tust.2018.08.015.
Li, S., X.-T. Feng, Z. Li, B. Chen, C. Zhang, and H. Zhou. 2012. “In-situ monitoring of rockburst nucleation and evolution in the deeply buried tunnels of Jinping II hydropower station.” Eng. Geol. 137–138: 85–96. https://doi.org/10.1016/j.enggeo.2012.03.010.
Manouchehrian, A. 2016. “Numerical modeling of unstable rock failure.” Ph.D. thesis, Natural Resources Engineering, Laurentian Univ.
Manouchehrian, A., and M. Cai. 2016. “Influence of material heterogeneity on failure intensity in unstable rock failure.” Comput. Geotech. 71: 237–246. https://doi.org/10.1016/j.compgeo.2015.10.004.
Manouchehrian, A., and M. Cai. 2017. “Analysis of rockburst in tunnels subjected to static and dynamic loads.” J. Rock Mech. Geotech. Eng. 9 (6): 1031–1040. https://doi.org/10.1016/j.jrmge.2017.07.001.
Manouchehrian, A., and M. Cai. 2018. “Numerical modeling of rockburst near fault zones in deep tunnels.” Tunnelling Underground Space Technol. 80: 164–180. https://doi.org/10.1016/j.tust.2018.06.015.
Milev, A., S. Spottiswoode, A. Rorke, and G. Finnie. 2001. “Seismic monitoring of a simulated rockburst on a wall of an underground tunnel.” J. S. Afr. Inst. Min. Metall. 101: 253–260.
Milev, A., S. Spottiswoode, B. Noble, L. Linzer, M. Van Zyl, A. Daehnke, and E. Acheampong. 2002. The meaningful use of peak particle velocities at excavation surfaces for the optimisation of the rockburst criteria for tunnels and stopes. SIMRAC Final Project Rep. GAP 709. Pretoria, South Africa: CSIR.
Mitri, H., and M. Saharan. 2005. “Destress blasting–from theory to practice.” CIM Bull. 98: 1–8.
Roux, A. J. A., E. R. Leeman, and H. G. Denkhaus. 1957. “Destressing: A means of ameliorating rockburst conditions. Part 1: The concept of destressing and results obtained from its application.” J. South. Afr. Inst. Min. Metall. 59: 66–68.
Saharan, M. R., and H. Mitri. 2011. “Destress blasting as a mines safety tool: Some fundamental challenges for successful applications.” Procedia Eng. 26: 37–47. https://doi.org/10.1016/j.proeng.2011.11.2137.
Shiyong, W., S. Manbin, and W. Jian. 2010. “Jinping hydropower project: Main technical issues on engineering geology and rock mechanics.” Bull. Eng. Geol. Environ. 69 (3): 325–332. https://doi.org/10.1007/s10064-010-0272-4.
Smith, M. 2009. ABAQUS/standard user's manual, version 6.9. Providence, RI: Dassault Systèmes Simulia Corp.
Tang, B. 2000. “Rockburst control using destress blasting.” Ph.D. thesis, Dept. of Mining & Metallurgical Engineering, McGill Univ.
Young, R. P. 1993. “Rockbursts and seismicity in mines 93.” In Proc., 3rd Int. Symp. Rotterdam, Netherlands: A.A. Balkema.
Zhang, C., X. Feng, H. Zhou, S. Qiu, and W. Wu. 2012a. “A top pilot tunnel preconditioning method for the prevention of extremely intense rockbursts in deep tunnels excavated by TBMs.” Rock Mech Rock Eng. 45 (3): 289–309. https://doi.org/10.1007/s00603-011-0199-5.
Zhang, C., X.-T. Feng, H. Zhou, S. Qiu, and W. Wu. 2012b. “Case histories of four extremely intense rockbursts in deep tunnels.” Rock Mech Rock Eng. 45 (3): 275–288. https://doi.org/10.1007/s00603-011-0218-6.
Zhang, C., X.-T. Feng, H. Zhou, S. Qiu, and W. Wu. 2013. “Rockmass damage development following two extremely intense rockbursts in deep tunnels at Jinping II hydropower station, southwestern China.” Bull. Eng. Geol. Environ. 72 (2): 237–247. https://doi.org/10.1007/s10064-013-0470-y.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Apr 14, 2021
Accepted: Dec 9, 2021
Published online: Jan 28, 2022
Published in print: Apr 1, 2022
Discussion open until: Jun 28, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Minghui Cao, Tongxu Wang, Kesheng Li, A Numerical Analysis of Coal Burst Potential After the Release of the Fault-Slip Energy, Rock Mechanics and Rock Engineering, 10.1007/s00603-023-03224-3, (2023).