Optimization of Grouting Material for Shield Tunnel Antifloating in Full-Face Rock Stratum in Nanchang Metro Construction in China
Publication: International Journal of Geomechanics
Volume 22, Issue 4
Abstract
Grouting control is one of the key measures to reduce segment floating, to ensure safety and efficiency during shield tunnel construction. In this study, optimization of backfill synchronous grouting material for shield tunnel antifloating in the water-rich full-face rock stratum in Nanchang Metro Line 4 is conducted based on laboratory experiments and in situ application. First, orthogonal tests are designed and conducted to investigate the influence of four main factors, that is, water–binder ratio, binder–sand ratio, cement–fly ash ratio, and bentonite–water ratio, on grouting material properties. Based on this, optimization is proposed using response surface methodology combined with laboratory optimization tests. According to the optimization, an admixture mass proportion (bentonite: 11.81%, hydroxyethyl methylcellulose: 0.42%, nanosilicon: 0.7%) is chosen based on the original grouting material constituents and then verified through both laboratory and field tests. The results show that the optimization can significantly increase the setting time, 1-d unconfined compressive strength, and water–land strength ratio, reducing almost 36% of the uplifting value of the tunnel segment when water-rich full-face rock stratum is encountered in this case.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research work is supported by the Natural Science Foundation of Jiangxi Province (No. 20212BAB204012), the Natural Science Foundation of Department of education of Jiangxi Province (No. GJJ190300), and the National Natural Science Foundation of China (Grant Nos. 51768021, 41972291, and 52163034).
References
Arora, J. S. 2017. Introduction to optimum design. 4th ed. Boston: Academic Press.
Cheng, W.-C., Z.-P. Song, W. Tian, and Z.-F. Wang. 2018. “Shield tunnel uplift and deformation characterisation: A case study from Zhengzhou metro.” Tunneling Underground Space Technol. 79: 83–95. https://doi.org/10.1016/j.tust.2018.05.002.
Cui, J., W.-H. Xu, Y. Fang, L.-M. Tao, and C. He. 2020. “Performance of slurry shield tunnelling in mixed strata based on field measurement and numerical simulation.” Adv. Mater. Sci. Eng. 2020: 1–14. https://doi.org/10.1155/2020/6785260.
Cui, Q.-L., H.-N. Wu, S.-L. Shen, Z.-Y. Yin, and S. Horpibulsuk. 2016. “Protection of neighbour buildings due to construction of shield tunnel in mixed ground with sand over weathered granite.” Environ. Earth Sci. 75 (6): 458. https://doi.org/10.1007/s12665-016-5300-7.
Dias, D., and R. Kastner. 2013. “Movements caused by the excavation of tunnels using face pressurized shields — Analysis of monitoring and numerical modeling results.” Eng. Geol. 152 (1): 17–25. https://doi.org/10.1016/j.enggeo.2012.10.002.
Ding, W., C. Duan, Y. Zhu, T. Zhao, D. Huang, and P. Li. 2019. “The behavior of synchronous grouting in a quasi-rectangular shield tunnel based on a large visualized model test.” Tunneling Underground Space Technol. 83: 409–424. https://doi.org/10.1016/j.tust.2018.10.006.
Gong, Q., Y. Zhao, J. Zhou, and S. Zhou. 2018. “Uplift resistance and progressive failure mechanisms of metro shield tunnel in soft clay.” Tunneling Underground Space Technol. 82: 222–234. https://doi.org/10.1016/j.tust.2018.08.038.
Guan, Z.-C., T. Deng, G. Wang, and Y.-J. Jiang. 2015. “Studies on the key parameters in segmental lining design.” J. Rock. Mech. Geotech. Eng. 7 (6): 674–683. https://doi.org/10.1016/j.jrmge.2015.08.008.
Haung, Y., L. Li, J. Ni, and L.-B. Chen. 2017. “Uplift model analysis for shallow overlaying slurry shield tunnel based on time-varying behavior of cement grouting material.” Key Eng. Mater. 723: 782–788. https://doi.org/10.4028/www.scientific.net/KEM.723.782.
He, S.-Y., J.-X. Lai, L.-X. Wang, and K. Wang. 2020a. “A literature review on properties and applications of grouts for shield tunnel.” Constr. Build. Mater. 239: 117782. https://doi.org/10.1016/j.conbuildmat.2019.117782.
He, X.-C., Y.-S. Xu, S.-L. Shen, and A.-N. Zhou. 2020b. “Geological environment problems during metro shield tunneling in Shenzhen, China.” Arab. J. Geosci. 13 (2): 87. https://doi.org/10.1007/s12517-020-5071-z.
Kamalakannan, S., R. Thirunavukkarasu, R. G. Pillai, and M. Santhanam. 2018. “Factors affecting the performance characteristics of cementitious grouts for post-tensioning applications.” Constr. Build. Mater. 180: 681–691. https://doi.org/10.1016/j.conbuildmat.2018.05.236.
Li, X.-G., and X.-S. Chen. 2012. “Using grouting of shield tunneling to reduce settlements of overlying tunnels: Case study in Shenzhen Metro Construction.” J. Constr. Eng. Manage. 138 (4): 574–584. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000455.
Liang, Y., Y.-F. Xiao, and Y.-X. Lin. 2020. “Pore water pressure responses in sand stratum during shield tunnelling: A case study.” Adv. Civ. Eng. 2020: 6139246. https://doi.org/10.1155/2020/6139246.
Liu, C., J.-S. Li, Z.-X. Zhang, P. Li, J. Cui, H. Liu, and Y.-B. Yang. 2020. “Model tests on tail-grouting process during URUP shield tunneling in soft soil.” Tunneling Underground Space Technol. 103: 103451. https://doi.org/10.1016/j.tust.2020.103451.
Liu, J.-L., O. Hamza, K. Sian Davies-Vollum, and J.-Q. Liu. 2018. “Repairing a shield tunnel damaged by secondary grouting.” Tunneling Underground Space Technol. 80: 313–321. https://doi.org/10.1016/j.tust.2018.07.016.
Liu, X.-Y., and D.-J. Yuan. 2015. “Mechanical analysis of anti-buoyancy safety for a shield tunnel under water in sands.” Tunneling Underground Space Technol. 47: 153–161. https://doi.org/10.1016/j.tust.2014.12.005.
Mao, J.-H., D.-J. Yuan, D.-L. Jin, and J.-F. Zeng. 2020. “Optimization and application of backfill grouting material for submarine tunnel.” Constr. Build. Mater. 265: 120281. https://doi.org/10.1016/j.conbuildmat.2020.120281.
MOHURD (Ministry of Housing and Urban-Rural Development). 1991. Test method for basic properties of building mortar. [In Chinese.] JGJ70-90. Beijing: China Building Industry Press.
Pan, D.-J., N. Zhang, C.-H. Zhang, D.-Y. Qian, C.-L. Han, and S. Yang. 2018. “Long-term mechanical behavior of nano silica sol grouting.” Nanomaterials 8 (1): 46. https://doi.org/10.3390/nano8010046.
Park, H., J.-Y. Oh, D. Kim, and S. Chang. 2018. “Monitoring and analysis of ground settlement induced by tunnelling with slurry pressure-balanced tunnel boring machine.” Adv. Civ. Eng. 2018: 5879402. https://doi.org/10.1155/2018/5879402.
Pascual-Muñoz, P., I. Indacoechea-Vega, D. Zamora-Barraza, and D. Castro-Fresno. 2018. “Experimental analysis of enhanced cement-sand-based geothermal grouting materials.” Constr. Build. Mater. 185: 481–488. https://doi.org/10.1016/j.conbuildmat.2018.07.076.
Qiu, J.-L., Y.-Q. Lu, J.-X. Lai, C.-X. Guo, and K. Wang. 2020. “Failure behavior investigation of loess metro tunnel under local-high-pressure water environment.” Eng. Fail. Anal. 115: 104631. https://doi.org/10.1016/j.engfailanal.2020.104631.
Shah, R., A. Lavasan, D. Peila, C. Todaro, A. Luciani, and T. Schanz. 2018. “Numerical study on backfilling the tail void using a two-component grout.” J. Mater. Civ. Eng. 30 (3): 04018003. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002175.
Wang, J., and P. Somasundaran. 2006. “Mechanisms of ethyl(hydroxyethyl) cellulose–solid interaction: Influence of hydrophobic modification.” J. Colloid Interface Sci. 293 (2): 322–332. https://doi.org/10.1016/j.jcis.2005.06.072.
Wang, L.-L., X.-B. Xu, Q.-S. Zhang, and S.-Y. Li. 2021. “Performance optimization of cement-fly ash grouting material based on response surface methodology.” Mater. Sci. Forum 1036: 337–344. https://doi.org/10.4028/www.scientific.net/MSF.1036.337.
Wang, L.-X., C.-H. Li, J.-L. Qiu, K. Wang, T. Liu, and H. Li. 2020. “Treatment and effect of loess metro tunnel under surrounding pressure and water immersion environment.” Geofluids 2020: 7868157. https://doi.org/10.1155/2020/7868157.
Wang, S., R.-H. Gong, Z.-J. Li, C.-P. Yuan, G. Jiang, J.-F. Wang, L.-Y. Chen, and C.-W. Ye. 2019. “Water-blocking nano-composite cement-based grouting materials.” Appl. Nanosci. 9 (7): 1565–1578. https://doi.org/10.1007/s13204-019-00975-w.
Yan, Z.-G., H.-H. Zhu, J. Woody, and W.-Q. Ding. 2012. “Full-scale fire tests of RC metro shield TBM tunnel linings.” Constr. Build. Mater. 36: 484–494. https://doi.org/10.1016/j.conbuildmat.2012.06.006.
Ye, F., T. Yang, J.-H. Mao, X.-Z. Qin, and R.-L. Zhao. 2019. “Half-spherical surface diffusion model of shield tunnel back-fill grouting based on infiltration effect.” Tunneling Underground Space Technol. 83: 274–281. https://doi.org/10.1016/j.tust.2018.10.004.
Yuan, X.-H., and Y.-W. Han. 2011. “Experimental research on rheological properties of cemented mortar in tail void grouting of shield tunnel.” Adv. Mater. Res. 261-263: 1201–1205. https://doi.org/10.4028/www.scientific.net/AMR.261-263.1201.
Zhang, C., J.-S. Yang, J.-Y. Fu, S.-Y. Wang, J. Yin, and Y.-P. Xie. 2020. “Recycling of discharged soil from EPB shield tunnels as a sustainable raw material for synchronous grouting.” J. Clean. Prod. 268: 121947. https://doi.org/10.1016/j.jclepro.2020.121947.
Zhang, C., J.-Y. Fu, J.-S. Yang, X.-F. Ou, X.-T. Ye, and Y. Zhang. 2018. “Formulation and performance of grouting materials for underwater shield tunnel construction in karst ground.” Constr. Build. Mater. 187: 327–338. https://doi.org/10.1016/j.conbuildmat.2018.07.054.
Zhang, F.-S., X.-Y. Xie, and H.-W. Huang. 2010. “Application of ground penetrating radar in grouting evaluation for shield tunnel construction.” Tunneling Underground Space Technol. 25 (2): 99–107. https://doi.org/10.1016/j.tust.2009.09.006.
Zhou, S., and C. Ji. 2014. “Tunnel segment uplift model of earth pressure balance shield in soft soils during subway tunnel construction.” Int. J. Rail. Transp. 2 (4): 221–238. https://doi.org/10.1080/23248378.2014.966420.
Zou, J.-F., and S.-Q. Zuo. 2016. “Similarity solution for the synchronous grouting of shield tunnel under the vertical non-axisymmetric displacement boundary condition.” Adv. Appl. Math. Mech. 9 (1): 205–232. https://doi.org/10.4208/aamm.2016.m1479.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jun 27, 2021
Accepted: Nov 18, 2021
Published online: Jan 31, 2022
Published in print: Apr 1, 2022
Discussion open until: Jul 1, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Weilong Song, Fusheng Zha, Zhiduo Zhu, Fei Wang, Sulfate Resistance of Novel Alkali-Activated Filling Grout for Shield Tunnels: Comparison with Typical OPC-Based Filling Grout, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16300, 35, 12, (2023).
- Yanbin Fu, Chao Mei, Xiangsheng Chen, Weiwen Li, Baojun Yu, Xuhui Li, Beiling Wang, Shun Wang, The time-dependent grout buoyancy behavior based on cement hydration mechanism, Cement and Concrete Research, 10.1016/j.cemconres.2023.107100, 166, (107100), (2023).
- Wen Wang, Xin Zhang, Xiaoning Liu, Construction and Quality Control of Subway Wet Loess in Concealed Tunnel Based on Particle Swarm Optimization Algorithm, Journal of Sensors, 10.1155/2022/3655202, 2022, (1-13), (2022).