Liquid-Bridge Contact Model of Unsaturated Granular Materials and its Application in Discrete-Element Method
Publication: International Journal of Geomechanics
Volume 21, Issue 9
Abstract
In the past, the capillary effect is rarely considered for microcontact models when two adjacent particles are separated by a certain distance. In this paper, a liquid-bridge contact model of unsaturated particles is presented, which is applied to the discrete-element software PFC. Based on this, simulations of uniaxial tensile for unsaturated soils under (2D) situation are carried out, and influence of a water retention angle on uniaxial tensile strength are studied. The simulation results show that the uniaxial tensile strength of unsaturated soil decreases gradually with the increase of the water retention angle, obvious cracks generate at both ends of the soil samples, and the soil sample possesses a residual strength. According to the particle displacement field, velocity field, and contact force chain, the failure forms of samples with different water retention angles are determined. Based on the rose diagram of normal contact force, the changes of its direction and value during failure process are observed directly, so as to analyze the evolution law of contact force for unsaturated soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (U2034204, 52078031, U1834206) and the Natural Science Foundation of Beijing Municipality (8202038).
References
Backstrom, A., et al. 2008. “Numerical modelling of uniaxial compressive failure of granite with and without saline porewater.” Int. J. Rock Mech. Min. Sci. 45 (7): 1126–1142. https://doi.org/10.1016/j.ijrmms.2007.12.001.
Cundall, P. A. 1971. The measurement and analysis of acceleration in rock slopes. London: Univ. of London, Imperial College of Science and Technology.
Cundall, P. A. 2004. PFD3D user’s manual (version 3.1). Minneapolis, MN: Itasca.
Cundall, P. A., and O. D. L. Strack. 1979. “A discrete numerical model for granular assemblies.” Géotechnique 29: 47–65. https://doi.org/10.1680/geot.1979.29.1.47.
Fakhimi, A., F. Carvalho, T. Ishida, and J. F. Labuz. 2002. “Simulation of failure around a circular opening in rock.” Int. J. Rock Mech. Min. Sci. 39 (4): 507–515. https://doi.org/10.1016/S1365-1609(02)00041-2.
Fredlund, D. G., A. Xing, M. D. Fredlund, and S. L. Barbour. 1996. “The relationship of the unsaturated soil shear strength to the soil–water characteristic curve.” Can. Geotech. J. 33 (3): 440–448. https://doi.org/10.1139/t96-065.
Goldman, A. J., R. G. Cox, and H. Brenner. 1967. “Slow viscous motion of a sphere parallel to a plane wall-II Courtte flow.” Chem. Eng. Sci. 22 (4): 653–660. https://doi.org/10.1016/0009-2509(67)80048-4.
Hsieh, Y. M., H. H. Li, T. H. Huang, and F. S. Jeng. 2008. “Interpretations on how the macroscopic mechanical behavior of sandstone affected by microscopic properties—Revealed by bonded-particle model.” Eng. Geol. 99 (1–2): 1–10. https://doi.org/10.1016/j.enggeo.2008.01.017.
Jian, G., and L. Jun. 2017. “Analysis of the thresholds of granular mixtures using the discrete element method.” Geomech. Eng. 12 (4): 639–655. https://doi.org/10.12989/gae.2017.12.4.639.
Jiang, M. J., D. Harris, and H. S. Yu. 2005. “Kinematic models for non-coaxial granular materials: Part II: Evaluation.” Int. J. Numer. Anal. Methods Geomech. 29 (7): 663–689. https://doi.org/10.1002/nag.431.
Jiang, M. J., S. Leroueil, and J. M. Konrad. 2004. “Insight into shear strength functions of unsaturated granulates by DEM analyses.” Comput. Geotech. 31 (6): 473–489. https://doi.org/10.1016/j.compgeo.2004.07.001.
Liu, X. R., Y. Fu, Y. R. Zheng, and Z. L. Zhong. 2011. “Relation between meso-parameters of particle flow code and fracture toughness of rock.“ [In Chinese.].” Chin. J. Rock Mech. Eng. 30 (10): 2084–2089.
Obermayr, M., K. Dressler, C. Vrettos, and P. Eberhard. 2013. “A bonded-particle model for cemented sand.” Comput. Geotech. 49: 299–313. https://doi.org/10.1016/j.compgeo.2012.09.001.
Potyondy, D. 2002. “A bonded-disk model for rock: Relating microproperties and macroproperties.” In Proc., 3rd Int. Conf. on Discrete Element Methods: Numerical Modeling of Discontinua, edited by B. K. Cook and R. P. Jensen, 340–345. Reston, VA: ASCE. https://doi.org/10.1061/40647(259)60.
Potyondy, D. O., and P. A. Cundall. 2004. “A bonded-particle model for rock.” Int. J. Rock Mech. Min. Sci. 41 (8): 1329–1364. https://doi.org/10.1016/j.ijrmms.2004.09.011.
Richefeu, V., M. S. El Youssoufi, R. Peyroux, and F. Radja. 2008. “A model of capillary cohesion for numerical simulations of 3D polydisperse granular media.” Int. J. Numer. Anal. Methods Geomech. 32 (11): 1365–1383. https://doi.org/10.1002/nag.674.
Sadek, M. A., Y. Chen, and J. Liu. 2011. “Simulating shear behavior of a sandy soil under different soil conditions.” J. Terramech. 48 (6): 451–458. https://doi.org/10.1016/j.jterra.2011.09.006.
Scholtès, L., B. Chareyre, F. Nicot, and F. Darve. 2009. “Micromechanics of granular materials with capillary effects.” Int. J. Eng. Sci. 47 (1): 64–75. https://doi.org/10.1016/j.ijengsci.2008.07.002.
Shen, Z. F., M. J. Jiang, and C. Thornton. 2016. “Shear strength of unsaturated granular soils: Three-dimensional discrete element analyses.” Granular Matter 18 (3): 37. https://doi.org/10.1007/s10035-016-0645-x.
Sitharam, T. G., J. S. Vinod, and B. V. Ravishankar. 2009. “Post-liquefaction undrained monotonic behaviour of sands: Experiments and DEM simulations.” Géotechnique 59 (9): 739–749. https://doi.org/10.1680/geot.7.00040.
Xu, W. J., C. Q. Li, and H. Y. Zhang. 2015. “DEM analyses of the mechanical behavior of soil and soil-rock mixture via the 3D direct shear test.” Geomech. Eng. 9 (6): 815–827. https://doi.org/10.12989/gae.2015.9.6.815.
Zhang, W., and C. Zhao. 2011. “Micromechanics analysis for unsaturated granular soils.” Acta Mech. Solida Sin. 24 (3): 273–281. https://doi.org/10.1016/S0894-9166(11)60028-1.
Zhao, S. W., J. D. Zhao, and Y. M. Lai. 2020. “Multiscale modeling of thermo-mechanical responses of granular materials: A hierarchical continuum–discrete coupling approach.” Comput. Methods Appl. Mech. Eng. 367: 113100. https://doi.org/10.1016/j.cma.2020.113100.
Zhao, S. W., and X. W. Zhou. 2017. “Effects of particle asphericity on the macro- and micro-mechanical behaviors of granular assemblies.” Granular Matter 19 (2): 38. https://doi.org/10.1007/s10035-017-0725-6.
Zhu, X., W. Liu, and Y. Lv. 2017. “The investigation of rock cutting simulation based on discrete element method.” Geomech. Eng. 13 (6): 977–995. https://doi.org/10.12989/gae.2017.13.6.977.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 9, 2020
Accepted: Apr 16, 2021
Published online: Jul 5, 2021
Published in print: Sep 1, 2021
Discussion open until: Dec 5, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Mengchen Li, Jiyuan Luan, Xuguang Gao, Jipeng Wang, Abdelali Dadda, A micro-investigation on water bridge effects for unsaturated granular materials with constant water content by discrete element method, Particuology, 10.1016/j.partic.2023.02.006, (2023).