Investigation of Development of the Earth Pressure Coefficient at Rest in Clay During Creep in the Framework of Hyper-Viscoplasticity
Publication: International Journal of Geomechanics
Volume 21, Issue 1
Abstract
The in situ earth pressure coefficient at rest (K0) for clay has been widely discussed in the literature. In engineering practice, the empirical relationships between K0, the overconsolidation ratio (OCR), and the normally consolidated value (), is often used. Where is as a function of friction angle (φ). These relationships do not distinguish between an increase in OCR that is due to unloading or the creep of the material. Although there is a significant amount of literature on the measurement of the change in K0 during unloading, there is a lack of data on the evolution of K0 due to creep. The few existing in situ measurements of K0 are highly uncertain and are difficult to use to investigate the time evolution of K0. Therefore, there is no clear consensus on the time evolution of K0 within the geotechnical community. Over the last 20 years, several creep models for clay have been developed within the framework of elastoviscoplasticity. One common feature of many of these models is that they only predict a minor change in K0 with time, because K0 is given by one unique position on the potential surface. This contrasts with the unproven opinion of many practitioners who think that K0 increases with time (even toward unity). To broaden the perspective of the discussion, this paper addresses the time evolution of K0 in the framework of hyper-viscoplasticity. This framework offers a possibility for an increase in K0 (even toward unity under certain conditions).
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the Research Council of Norway through its Centers of Excellence funding Scheme, PoreLab, project number 262644. The work was carried out while the main author was visiting professor at UCD during the academic year 2019-2020.
Notation
The following symbols are used in this paper:
- d
- dissipation function;
- K0
- Earth pressure coefficient at rest;
- Earth pressure coefficient at rest, normally consolidation value;
- m
- power number;
- M
- critical state line in p-q space;
- n
- creep power number;
- p
- mean effective stress;
- p0
- isotropic preconsolidation stress;
- peq
- equivalent effective stress;
- q
- deviatoric stress;
- r
- reference rate;
- w
- flow potential function;
- z
- force potential function;
- volumetric viscoplastic strain;
- deviatoric viscoplastic strain;
- γ
- parameter;
- η
- stress ratio (q/p);
- χp
- dissipative generalized mean stress; and
- χq
- dissipative generalized deviatoric stress.
References
Collins, I. F. 2003. “A systematic procedure for constructing critical state models in three dimensions.” Int. J. Solids Struct. 40 (17): 4379–4397. https://doi.org/10.1016/S0020-7683(03)00226-9.
Collins, I. F., and P. A. Kelly. 2002. “A thermomechanical analysis of a family of soil models.” Géotechnique 52 (7): 507–518. https://doi.org/10.1680/geot.2002.52.7.507.
Degago, S. A., S. Nordal, G. Grimstad, and H. P. Jostad. 2011. “Analyses of Väsby test fill according to creep hypothesis A and B.” In Proc., 13th Int. Conf. of the Int. Association for Computer Methods and Advances in Geomechanics, edited by N. Khalili, and M. Oeser, 307–312. Melbourne: N.p.
Den Haan, E. J. 2001. Evaluation of creep models for soft soils (under axially symmetric conditions). DC CO-710203/21. Delft, Netherlands: Delft Cluster.
Den Haan, E. J. 2002. “The influence of creep ageing on K0,nc.” In Learned and applied mechanics: A tribute to Dr Arnold Verruijt, TUD, edited by F. B. J. Barends, and P. M. P. C Steijger, 63–68. Lisse, Netherlands: Balkema.
Devapriya, C. W., and M. M. Said. 2000. “K0 development in Kaolin-bentonite mixtures.” In ISRM Int. Symp., 1–6. Lisbon, Portugal: International Society for Rock Mechanics and Rock Engineering.
Gjengstø, B. A. 2016. “Et Laboratoriestudie på Hviletrykkskoeffisientens Utvikling under Kryp for både Uforstyrret og Omrørt, Rekonsolidert Tillerleire” [A laboratory study on the evolution of the earth pressure coefficient under creep for both undisturbed and remoulded tiller clay]. M.Sc. thesis, Dept. of Civil and Environmental Engineering, NTNU.
Grimstad, G., et al. 2017. “Creep of geomaterials—Some finding from the EU project CREEP.” Eur. J. Environ. Civ. Eng. 1–16. https://doi.org/10.1080/19648189.2016.1271360.
Grimstad, G., D. Dadrasajirlou, and S. A. G. Amiri. 2020. “Modelling creep in clay using the framework of hyper-viscoplasticity.” Géotech. Lett. 10 (3): 1–5. https://doi.org/10.1680/jgele.20.00004
Grimstad, G., S. A. Degago, S. Nordal, and M. Karstunen. 2010. “Modeling creep and rate effects in structured anisotropic soft clays.” Acta Geotech. 5 (1): 69–81. https://doi.org/10.1007/s11440-010-0119-y.
Grimstad, G., M. A. Haji Ashrafi, S. A. Degago, S. Nordal, and A. Emdal. 2016. “Discussion of “soil creep effects on ground lateral deformation and pore water pressure under embankments”.” Geomech. Geoeng. 11 (1): 86–93. https://doi.org/10.1080/17486025.2014.985338.
Holtz, R. D., M. B. Jamiolkowski, and R. Lancellotta. 1986. “Lessons from Oedometer tests on high quality samples.” J. Geotech. Eng. 112 (8): 768–776. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:8(768).
Houlsby, G. T., and A. M. Puzrin. 2006. Principles of hyperplasticity: An approach to plasticity theory based on thermodynamic principles. Berlin: Springer Science & Business Media.
Houlsby, G. T., C. P. Wroth, and D. M. Wood. 1984. “Predictions of the results of laboratory tests on a clay using a critical state model.” In Int. Workshop on Constitutive Relations for Soils, 99–121. Rotterdam, Netherlands: AA Balkema Publishers.
Kavazanjian, E., and J. K. Mitchell. 1984. “Time dependence of lateral earth pressure.” J. Geotech. Eng. 110 (4): 530–533. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:4(530).
L’Heureux, J.-S., A. Lindgård, and A. Emdal. 2019. “The Tiller–Flotten research site: Geotechnical characterization of a very sensitive clay deposit.” AIMS Geosci. 5 (4): 831–867. https://doi.org/10.3934/geosci.2019.4.831.
Ladd, C., R. Foott, K. Ishihara, F. Schlosser, and H. Poulos. 1977. “State-of-the-art report on stress-deformation and strength characteristics.” In Proc., 9th ICSMFE, 421–494.
Mesri, G., and A. Castro. 1987. “Cα/Cc concept and K0 during secondary compression.” J. Geotech. Eng. 113 (3): 230–247. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:3(230).
Nash, D. F. T., J. J. M. Powell, and I. M. Lloyd. 1992. “Initial investigations of the soft clay test site at Bothkennar.” Géotechnique 42 (2): 163–181. https://doi.org/10.1680/geot.1992.42.2.163.
Ofstad, C. S., and A. Lindgård. 2017. Field and laboratory investigations to evaluate the coefficient of earth pressure at rest—NGTS flotten quick clay test site. Trondheim, Norway: NTNU.
Ouyang, Z., and P. W. Mayne. 2018. “Effective friction angle of clays and silts from piezocone penetration tests.” Can. Geotech. J. 55 (9): 1230–1247. https://doi.org/10.1139/cgj-2017-0451.
Roscoe, K. H., and J. B. Burland. 1968. On the generalized stress–strain behaviour of wet clay. Engineering plasticity, 535–609. Cambridge, UK: Cambridge University Press.
Schmertmann, J. H. 1983. “A simple question about consolidation.” J. Geotech. Eng. 109 (1): 119–122. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:1(119).
Schmertmann, J. H. 1991. “The mechanical aging of soils.” J. Geotech. Eng. 117 (9): 1288–1330. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:9(1288).
Senneset, K. 1989. “A new oedometer with splitted ring for the measurement of lateral stress.” In Proc., 12th Int. Conf. on Soil Mechanics and Foundations Engineering, 115–118. Oxfordshire, UK: Taylor & Francis.
Shin, H., and J. C. Santamarina. 2009. “Mineral dissolution and the evolution of K0.” J. Geotech. Geoenviron. Eng. 135 (8): 1141–1147. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000053.
Sletten, J. R. 2015. “On the earth pressure coefficient at rest during creep.” M.Sc. thesis, Dept. of Civil and Environmental Engineering, NTNU.
Stolle, D. F. E., P. A. Vermeer, and P. G. Bonnier. 1999. “A consolidation model for a creeping clay.” Can. Geotech. J. 36 (4): 754–759. https://doi.org/10.1139/t99-034.
Watabe, Y., and S. Leroueil. 2015. “Modeling and implementation of the isotache concept for long-term consolidation behavior.” Int. J. Geomech. 15 (5): A4014006. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000270.
Watabe, Y., M. Tanaka, H. Tanaka, and T. Tsuchida. 2003. “K0-consolidation in a triaxial cell and evaluation of in-situ K0 for marine clays with various characteristics.” Soils Found. 43 (1): 1–20. https://doi.org/10.3208/sandf.43.1.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Nov 20, 2019
Accepted: Aug 11, 2020
Published online: Oct 23, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 23, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.