Durability of Rammed Earth Materials
Publication: International Journal of Geomechanics
Volume 20, Issue 11
Abstract
Rammed earth (RE) is a low-embodied-energy construction technique that attracted the attention of engineers in recent years. To date, few studies have investigated the chemical deterioration of RE. This study investigated the durability of cement-stabilized rammed earth (CSRE) for 1 year under aggressive environments. Three cement contents were considered for preparing the CSRE specimens. They were exposed to acidic, alkaline, sulfate, and high-moisture environments. The mechanical properties of the CSRE specimens were determined at intervals of 1, 3, 6, 9, and 12 months of immersion in solutions. Results revealed that the sulfate environment was the most destructive solution for the CSRE specimens, which caused complete degradation of low-cement specimens and significantly decreased the compressive strength of high cement content CSRE. Scanning electron microscopy demonstrated the formation of ettringite for specimens submerged in sulfate solution. CSRE with small cement content was also completely disintegrated after 6 and 9 months of exposure in alkaline and acid environments, respectively. However, the acidic environment did not considerably affect the compressive strength of higher cement content CSRE, and the alkaline environment improved the compressive strength. Mathematical relationships are proposed between the compressive strength, Young's modulus, and ultrasonic pulse velocity for higher cement content specimens. Finally, multiobjective optimization by desirability function was used to minimize the cement content and maximize the compressive strength, simultaneously.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ali, A., and Š František. 2000. “Acidic corrosion of hydrated cement based materials: Part 1-mechanism of the phenomenon.” Ceram. Silik. 44 (3): 114–120.
Arrigoni, A., C. Beckett, D. Ciancio, and G. Dotelli. 2017a. “Life cycle analysis of environmental impact vs. durability of stabilised rammed earth.” Constr. Build. Mater. 142: 128–136. https://doi.org/10.1016/j.conbuildmat.2017.03.066.
Arrigoni, A., R. Pelosato, G. Dotelli, C. T. S. Beckett, and D. Ciancio. 2017b. “Weathering’s beneficial effect on waste-stabilised rammed earth: A chemical and microstructural investigation.” Constr. Build. Mater. 140: 157–166. https://doi.org/10.1016/j.conbuildmat.2017.02.009.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ft-lbf/ft3 (600 kN-m/m3)), ASTM International, D698-12e2. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test methods for wetting and drying compacted soil-cement mixtures, ASTM International, D559/D559M-15. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard practice for classification of soils for engineering purposes (Unified Soil Classification System), ASTM International, D2487-17e1. West Conshohocken, PA: ASTM.
Beckett, C. T. S., and D. Ciancio. 2016. “Durability of cement-stabilised rammed earth: A case study in Western Australia.” Aust. J. Civil Eng. 14 (1): 54–62. https://doi.org/10.1080/14488353.2015.1092671.
Bui, Q. B., J. C. Morel, B. V. Venkatarama Reddy, and W. Ghayad. 2009. “Durability of rammed earth walls exposed for 20 years to natural weathering.” Build. Environ. 44 (5): 912–919. https://doi.org/10.1016/j.buildenv.2008.07.001.
Burroughs, S. 2008. “Soil property criteria for rammed earth stabilization.” J. Mater. Civ. Eng. 20 (3): 264–273. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:3(264).
Chang, Z. T., X. J. Song, R. Munn, and M. Marosszeky. 2005. “Using limestone aggregates and different cements for enhancing resistance of concrete to sulphuric acid attack.” Cem. Concr. Res. 35 (8): 1486–1494. https://doi.org/10.1016/j.cemconres.2005.03.006.
Ciancio, D., P. Jaquin, and P. Walker. 2013. “Advances on the assessment of soil suitability for rammed earth.” Constr. Build. Mater. 42: 40–47. https://doi.org/10.1016/j.conbuildmat.2012.12.049.
Derringer, G., and R. Suich. 1980. “Simultaneous optimization of several response variables.” J. Qual. Technol. 12 (4): 214–219. https://doi.org/10.1080/00224065.1980.11980968.
Fan, Y. F., Z. Q. Hu, Y. Z. Zhang, and J. L. Liu. 2010. “Deterioration of compressive property of concrete under simulated acid rain environment.” Constr. Build. Mater. 24 (10): 1975–1983. https://doi.org/10.1016/j.conbuildmat.2010.04.002.
František, Š, and A. Allahverdi. 2005. “Sulfuric acid attack on hardened paste of geopolymer cements part 1. Mechanism of corrosion at relatively high concentrations.” Ceram. Silik. 49 (4): 225–229.
Gu, L., P. Visintin, and T. Bennett. 2018. “Evaluation of accelerated degradation test methods for cementitious composites subject to sulfuric acid attack; application to conventional and alkali-activated concretes.” Cem. Concr. Compos. 87: 187–204. https://doi.org/10.1016/j.cemconcomp.2017.12.015.
Guettala, A., A. Abibsi, and H. Houari. 2006. “Durability study of stabilized earth concrete under both laboratory and climatic conditions exposure.” Constr. Build. Mater. 20 (3): 119–127. https://doi.org/10.1016/j.conbuildmat.2005.02.001.
Hall, M., and Y. Djerbib. 2004. “Moisture ingress in rammed earth: Part 1—The effect of soil particle-size distribution on the rate of capillary suction.” Constr. Build. Mater. 18 (4): 269–280. https://doi.org/10.1016/j.conbuildmat.2003.11.002.
Hall, M. R. 2007. “Assessing the environmental performance of stabilised rammed earth walls using a climatic simulation chamber.” Build. Environ. 42 (1): 139–145. https://doi.org/10.1016/j.buildenv.2005.08.017.
Hallal, M. M., S. Sadek, and S. S. Najjar. 2018. “Evaluation of engineering characteristics of stabilized rammed-earth material sourced from natural fines-rich soil.” J. Mater. Civ. Eng. 30 (11): https://doi.org/04018273. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002481.
Heathcote, K. A. 2007. “Durability of earthwall buildings.” Science 9 (3): 185–189.
Hussaini, S. M. S., and V. Toufigh. 2019. “Strength and fracture behavior of rammed earth materials.” J. Mater. Civ. Eng. 31 (10): 04019228. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002876.
Kamon, M., C. Ying, and T. Katsumi. 1996. “Effect of acid rain on lime and cement stabilized soils.” Soils Found. 36 (4): 91–99. https://doi.org/10.3208/sandf.36.4_91.
Kariyawasam, K. K. G. K. D., and C. Jayasinghe. 2016. “Cement stabilized rammed earth as a sustainable construction material.” Constr. Build. Mater. 105: 519–527. https://doi.org/10.1016/j.conbuildmat.2015.12.189.
Kianfar, E., and V. Toufigh. 2016. “Reliability analysis of rammed earth structures.” Constr. Build. Mater. 127: 884–895. https://doi.org/10.1016/j.conbuildmat.2016.10.052.
Köksal, F., Y. Şahin, O. Gencel, and İ Yiğit. 2013. “Fracture energy-based optimisation of steel fibre reinforced concretes.” Eng. Fract. Mech. 107: 29–37. https://doi.org/10.1016/j.engfracmech.2013.04.018.
Liu, J., F. Zha, Y. Deng, K. Cui, and X. Zhang. 2017. “Effect of an alkaline environment on the engineering behavior of cement-stabilized/solidified Zn-contaminated soils.” Environ. Sci. Pollut. Res. 24 (36): 28248–28257. https://doi.org/10.1007/s11356-017-0400-9.
Malhotra, V. M., and N. J. Carino. 2003. Handbook on nondestructive testing of concrete. London: CRC press.
Massazza, F. 2003. “Pozzolana and pozzolanic cements.” In Lea’s chemistry of cement and concrete, edited by P. C. Hewlett, 471–635. London: Elsevier.
Millogo, Y., and J. C. Morel. 2012. “Microstructural characterization and mechanical properties of cement stabilised adobes.” Mater. Struct. 45 (9): 1311–1318.
Morel, J. C., A. Mesbah, M. Oggero, and P. Walker. 2001. “Building houses with local materials: Means to drastically reduce the environmental impact of construction.” Build. Environ. 36 (10): 1119–1126. https://doi.org/10.1016/S0360-1323(00)00054-8.
Nematzadeh, M., and S. Fallah-Valukolaee. 2017. “Erosion resistance of high-strength concrete containing forta-ferro fibers against sulfuric acid attack with an optimum design.” Constr. Build. Mater. 154: 675–686. https://doi.org/10.1016/j.conbuildmat.2017.07.180.
Ogunye, F. O., and H. Boussabaine. 2002. “Development of a rainfall test rig as an aid in soil block weathering assessment.” Constr. Build. Mater. 16 (3): 173–180. https://doi.org/10.1016/S0950-0618(02)00010-7.
Ohdaira, E., and N. Masuzawa. 2000. “Water content and its effect on ultrasound propagation in concrete—The possibility of NDE.” Ultrasonics 38 (1–8): 546–552. https://doi.org/10.1016/S0041-624X(99)00158-4.
Pellet, F., and G. Fabre. 2007. “Damage evaluation with P-wave velocity measurements during uniaxial compression tests on argillaceous rocks.” Int. J. Geomech. 7 (6): 431–436. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:6(431).
Rajasekaran, G. 2005. “Sulphate attack and ettringite formation in the lime and cement stabilized marine clays.” Ocean Eng. 32 (8–9): 1133–1159. https://doi.org/10.1016/j.oceaneng.2004.08.012.
Rios, S., N. Cristelo, A. V. da Fonseca, and C. Ferreira. 2017. “Stiffness behavior of soil stabilized with alkali-activated fly ash from small to large strains.” Int. J. Geomech. 17 (3): 04016087. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000783.
Shao, M., L. Li, S. Wang, E. Wang, and Z. Li. 2013. “Deterioration mechanisms of building materials of Jiaohe ruins in China.” J. Cult. Heritage 14 (1): 38–44. https://doi.org/10.1016/j.culher.2012.03.006.
Sherwood, P. T. 1962. “Effect of sulfates on cement- and lime-stabilized soils.” Highway Res. Board Bull. 353: 98–107.
Shihata, S. A., and Z. A. Baghdadi. 2002. “Long-term strength and durability of soil cement.” J. Mater. Civ. Eng. 13 (3): 161–165. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:3(161).
Silva, R. A., D. V. Oliveira, T. Miranda, N. Cristelo, M. C. Escobar, and E. Soares. 2013. “Rammed earth construction with granitic residual soils: The case study of northern Portugal.” Constr. Build. Mater. 47: 181–191. https://doi.org/10.1016/j.conbuildmat.2013.05.047.
Sindhunata, Provis, J. L., G. C. Lukey, H. Xu, and J. S. J. van Deventer. 2008. “Structural evolution of fly ash based geopolymers in alkaline environments.” Ind. Eng. Chem. Res. 47 (9): 2991–2999. https://doi.org/10.1021/ie0707671.
Singh, G., and R. Siddique. 2012. “Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete.” Constr. Build. Mater. 26 (1): 416–422. https://doi.org/10.1016/j.conbuildmat.2011.06.041.
Sukmak, P., P. De Silva, S. Horpibulsuk, and P. Chindaprasirt. 2015. “Sulfate resistance of clay-Portland cement and clay high-calcium fly ash Geopolymer.” J. Mater. Civ. Eng. 27 (5): 04014158. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001112.
Tharmaratnam, K., and B. S. Tan. 1990. “Attenuation of ultrasonic pulse in cement mortar.” Cem. Concr. Res. 20 (3): 335–345. https://doi.org/10.1016/0008-8846(90)90022-P.
Toufigh, V., and E. Kianfar. 2019. “The effects of stabilizers on the thermal and the mechanical properties of rammed earth at various humidities and their environmental impacts.” Constr. Build. Mater. 200: 616–629. https://doi.org/10.1016/j.conbuildmat.2018.12.050.
Tripura, D. D., and K. D. Singh. 2015. “Characteristic properties of cement-stabilized rammed earth blocks.” J. Mater. Civ. Eng. 27 (7): 04014214. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001170.
Venkatarama Reddy, B. V., and P. Prasanna Kumar. 2010. “Embodied energy in cement stabilised rammed earth walls.” Energy Build. 42 (3): 380–385. https://doi.org/10.1016/j.enbuild.2009.10.005.
Venkatarama Reddy, B. V., and P. Prasanna Kumar. 2011. “Cement stabilised rammed earth. Part A: Compaction characteristics and physical properties of compacted cement stabilised soils.” Mater. Struct. 44 (3): 681–693.
Walker, P., R. Keable, J. Martin, and V. Maniatidis. 2005. Rammed earth: Design and construction guidelines. Watford, UK: BRE Bookshop.
Xing, H., X. Yang, C. Xu, and G. Ye. 2009. “Strength characteristics and mechanisms of salt-rich soil-cement.” Eng. Geol. 103 (1–2): 33–38. https://doi.org/10.1016/j.enggeo.2008.07.011.
Yang, Y., G. Wang, S. Xie, X. Tu, and X. Huang. 2013. “Effect of mechanical property of cemented soil under the different pH value.” Appl. Clay Sci. 79: 19–24. https://doi.org/10.1016/j.clay.2013.02.014.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 20 • Issue 11 • November 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Dec 27, 2019
Accepted: Jun 12, 2020
Published online: Aug 20, 2020
Published in print: Nov 1, 2020
Discussion open until: Jan 20, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.