Analysis of Deformation and Degradation of Fouled Ballast: Experimental Testing and DEM Modeling
Publication: International Journal of Geomechanics
Volume 20, Issue 9
Abstract
The deformation and degradation of fouled ballast have been examined by large-scale triaxial tests and discrete element modeling (DEM) to understand how clay fouling changes the shear strength and micromechanical aspects of ballast. Particle shape analysis using 3D aggregate imaging and a laser scanner is introduced to construct more realistic polyhedral discrete elements that will represent natural ballast particles. Shear stress-strain and volumetric changes of fresh and clay-fouled ballast are analyzed. Micromechanical analysis of the fouled ballast is carried out and the effects of fines are quantified by considering the changes of ballast breakage, particle connectivity number Cn, and the associated distribution of contact forces that could not be measured experimentally. These findings enable a more insightful understanding of the load-deformation of fouled ballast from a micromechanical perspective.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the Industrial Transformation Training Centre for Advanced Technologies in Rail Track Infrastructure (ARC, ITTC-Rail, IC170100006). The authors are grateful to Prof. Glenn McDowell who made valuable comments on DEM modeling during previous ARC-funded projects.
References
Anderson, W. F., and P. Fair. 2008. “Behavior of railroad ballast under monotonic and cyclic loading.” J. Geotech. Geoenviron. Eng. 134 (3): 316–327. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:3(316).
Azéma, E., S. Linero, N. Estrada, and A. Lizcano. 2017. “Particle shape effects.” EPJ Web Conf. 140: 06024. https://doi.org/10.1051/epjconf/201714006024.
Bolton, M. D., Y. Nakata, and Y. P. Cheng. 2008. “Micro- and macro-mechanical behavior of DEM crushable materials.” Géotechnique 58 (6): 471–480. https://doi.org/10.1680/geot.2008.58.6.471.
Cundall, P. A., and O. D. L. Strack. 1979. “A discrete numerical model for granular assemblies.” Géotechnique 29 (1): 47–65. https://doi.org/10.1680/geot.1979.29.1.47.
da Cruz, F., S. Emam, M. Prochnow, J.-N. Roux, and F. Chevoir. 2005. “Rheophysics of dense granular materials: Discrete simulation of plane shear flows.” Phys. Rev. E 72 (2): 021309. https://doi.org/10.1103/PhysRevE.72.021309.
Danesh, A., M. Palassi, and A. A. Mirghasemi. 2018. “Effect of sand and clay fouling on the shear strength of railway ballast for different ballast gradations.” Granular Matter 20 (3): 51. https://doi.org/10.1007/s10035-018-0824-z.
Feldman, F., and D. Nissen. 2002. “Alternative testing method for the measurement of ballast fouling: Percentage void contamination.” In Proc., Conf. on Railway Engineering, 101–111. Barton, Australia: RTSA.
Fu, P., and Y. F. Dafalias. 2011. “Study of anisotropic shear strength of granular materials using DEM simulation.” Int. J. Numer. Anal. Methods Geomech. 35 (10): 1098–1126. https://doi.org/10.1002/nag.945.
Ghasemi, A. E., K. J. Dong, A. B. Yu, and R. Y. Yang. 2017. “A combined experimental and DEM approach to determine the breakage of particles in an impact mill.” Powder Technol. 318: 543–548. https://doi.org/10.1016/j.powtec.2017.06.026.
Guo, W.-L., and J.-G. Zhu. 2017. “Particle breakage energy and stress dilatancy in drained shear of rockfills.” Géotech. Lett. 7 (4): 304–308. https://doi.org/10.1680/jgele.17.00099.
He, Y., T. J. Evans, Y. S. Shen, A. B. Yu, and R. Y. Yang. 2018. “Discrete modeling of the compaction of non-spherical particles using a multi-sphere approach.” Miner. Eng. 117: 108–116. https://doi.org/10.1016/j.mineng.2017.12.013.
Huang, H., and E. Tutumluer. 2011. “Discrete element modeling for fouled railroad ballast.” Constr. Build. Mater. 25 (8): 3306–3312. https://doi.org/10.1016/j.conbuildmat.2011.03.019.
Huang, H., E. Tutumluer, and W. Dombrow. 2009a. “Laboratory characterization of fouled railroad ballast behavior.” Transp. Res. Rec. 2117: 93–101. https://doi.org/10.3141/2117-12.
Huang, H., E. Tutumluer, M. A. Hashash, and J. Ghaboussi. 2009b. “Discrete element modeling of aggregate behavior in fouled railroad ballast.” In Recent Advancement In Soil Behavior, in Situ Test Methods, Pile Foundations, and Tunneling: Selected Papers From the 2009 GeoHunan Int. Conf., Geotechnical Special Publication 192, edited by L. Ali, A. C. Correia, J. Yang, and M. Tao, 33–41. Reston, VA: ASCE.
Indraratna, B., N. T. Ngo, and C. Rujikiatkamjorn. 2011a. “Behavior of geogrid-reinforced ballast under various levels of fouling.” Geotext. Geomembr. 29 (3): 313–322. https://doi.org/10.1016/j.geotexmem.2011.01.015.
Indraratna, B., N. T. Ngo, C. Rujikiatkamjorn, and J. S. Vinod. 2014. “Behavior of fresh and fouled railway ballast subjected to direct shear testing: A discrete element simulation.” Int. J. Geomech. 14 (1): 34–44. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000264.
Indraratna, B., W. Salim, and C. Rujikiatkamjorn. 2011b. Advanced rail geotechnology—Ballasted track. London: CRC Press.
Indraratna, B., N. Tennakoon, S. Nimbalkar, and C. Rujikiatkamjorn. 2013. “Behavior of clay-fouled ballast under drained triaxial testing.” Géotechnique 63 (5): 410–419. https://doi.org/10.1680/geot.11.P.086.
Jo, S. A., E. K. Kim, G. C. Cho, and S. W. Lee. 2011. “Particle shape and crushing effects on the direct shear behavior using DEM.” Soils Found. 51 (4): 701–712. https://doi.org/10.3208/sandf.51.701.
Karrech, A., D. Duhamel, G. Bonnet, F. Chevoir, J.-N. Roux, J. Canou, and J.-C. Dupla. 2008. “A discrete element study of settlement in vibrated granular layers: Role of contact loss and acceleration.” Granular Matter 10 (5): 369–375. https://doi.org/10.1007/s10035-008-0101-7.
Lim, W. L., and G. R. McDowell. 2005. “Discrete element modeling of railway ballast.” Granular Matter 7 (1): 19–29. https://doi.org/10.1007/s10035-004-0189-3.
Lobo-Guerrero, S., and L. E. Vallejo. 2006. “Discrete element method analysis of railtrack ballast degradation during cyclic loading.” Granular Matter 8 (3–4): 195–204. https://doi.org/10.1007/s10035-006-0006-2.
Lu, M., and G. R. McDowell. 2010. “Discrete element modeling of railway ballast under monotonic and cyclic triaxial loading.” Géotechnique 60 (6): 459–467. https://doi.org/10.1680/geot.2010.60.6.459.
McDowell, G. R., and H. Li. 2016. “Discrete element modeling of scaled railway ballast under triaxial conditions.” Granular Matter 18 (3): 66. https://doi.org/10.1007/s10035-016-0663-8.
Ngo, N. T., B. Indraratna, and C. Rujikiatkamjorn. 2017. “Simulation ballasted track behavior: Numerical treatment and field application.” Int. J. Geomech. 17 (6): 04016130. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000831.
Ouhbi, N., C. Voivret, G. Perrin, and J.-N. Roux. 2017. “3D particle shape modeling and optimization through proper orthogonal decomposition.” Granular Matter 19 (4): 86. https://doi.org/10.1007/s10035-017-0771-0.
Selig, E. T., and J. M. Waters. 1994. Track geotechnology and substructure management. London: Thomas Telford.
Standard Australia. 2015. Aggregates and rock for engineering purposes, Part 7. Railway ballast. AS:2758.7. Sydney, Australia: Standard Australia.
Tennakoon, N., B. Indraratna, C. Rujikiatkamjorn, S. Nimbalkar, and T. Neville. 2012. “The role of ballast-fouling characteristics on the drainage capacity of rail substructure.” Geotech. Test. J. 35 (4): 104107. https://doi.org/10.1520/GTJ104107.
Tutumluer, E., H. Huang, and X. Bian. 2012. “Geogrid-aggregate interlock mechanism investigated through aggregate imaging-based discrete element modeling approach.” Int. J. Geomech. 12 (4): 391–398. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000113.
Tutumluer, E., Y. Qian, Y. M. A. Hashash, J. Ghaboussi, and D. D. Davis. 2013. “Discrete element modeling of ballasted track deformation behavior.” Int. J. Rail Transp. 1 (1–2): 57–73. https://doi.org/10.1080/23248378.2013.788361.
Zhang, X., C. Zhao, and W. Zhai. 2017. “Dynamic behavior analysis of high-speed railway ballast under moving vehicle loads using discrete element method.” Int. J. Geomech. 17 (7): 04016157. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000871.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Sep 4, 2019
Accepted: Apr 1, 2020
Published online: Jun 17, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 17, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.