Impact of Coal Ranks and Confining Pressures on Coal Strength, Permeability, and Acoustic Emission
Publication: International Journal of Geomechanics
Volume 20, Issue 8
Abstract
Hydraulic fracturing is extensively applied as an effective stimulation technology to enhance coalbed methane recovery. Coal strength and permeability play critical roles in the performance of hydraulic fracturing, and acoustic emission (AE) provides useful information to evaluate this. Coal strength, permeability, and AE are all governed by coal rank and stress condition. However, the influence of coal rank and stress condition remains unclear. In this work, the coal strength, permeability, and AE are investigated under different confining pressures for different coal ranks in the laboratory. The results show these properties are mainly controlled by coal structure, particularly the development of pores and cracks. The compressive strength of coal presents a U-shaped trend with the vitrinite reflectance. However, as the confining pressure increases, the compressive strength raises, but its increase rate declines. In the process of loading stress, the permeability, and AE activities can be divided into three phases: compaction and elastic deformation phase, nonelastic deformation phase, and macroscopic failure phase. The initial permeability of low and medium-rank coals is higher than those of high-rank coals. In addition, as the confining pressure increases, AE activities and permeability weaken. The occurrence of abundant AE activities do not always suggest the generation of new cracks, but it can be regarded as an indicator, where the coalbed reservoir exhibits high permeability. Finally, based on these results, a new damaged model and a constitutive relationship between AE counts and stress are proposed to describe the coal-damaged evolution and predict its stress–strain behavior.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is financially supported by the Shanxi Province Science and Technology Major Project (Grants 20191102001 and 20181101013), the National Science and Technology Major Project of the Ministry of Science and Technology of China During “13th Five-Year Plan” (Grants 2016ZX05067001-006).
References
Bi, J. J., X. B. Su, D. X. Han, and J. F. Chen. 2001. “The relation between cleat frequency and coal rank.” [In Chinese.] J. China Coal Soc. 26 (4): 346–349.
Butt, S. D. 1999. “Development of an apparatus to study the gas permeability and acoustic emission characteristics of an outburst-prone sandstone as a function of stress.” Int. J. Rock Mech. Min. Sci. 36 (8): 1079–1085. https://doi.org/10.1016/S1365-1609(99)00067-2.
Cai, P., W. Nie, D. W. Chen, S. B. Yang, and Z. Q. Liu. 2019. “Effect of air flowrate on pollutant dispersion pattern of coal dust particles at fully mechanized mining face based on numerical simulation.” Fuel 239: 623–635. https://doi.org/10.1016/j.fuel.2018.11.030.
Cai, Y., D. Liu, J. P. Mathews, Z. Pan, D. Elsworth, Y. Yao, J. Li, and X. Guo. 2014. “Permeability evolution in fractured coal—combining triaxial confinement with X-ray computed tomography, acoustic emission and ultrasonic techniques.” Int. J. Coal Geol. J. 122: 91–104. https://doi.org/10.1016/j.coal.2013.12.012.
Cai, Y., D. Liu, Y. Yao, J. Li, Y. Qiu, and B. Zhang. 2015. “Acoustic emission characteristics of water-saturated coals under tri-axial stress condition in the process of deformation and failure.” [In Chinese.] Earth Sci. Front. 22 (3): 394–401.
Cao, M., Y. Kang, Z. Deng, B. Tian, Q. Zhao, and H. Wang. 2019. “Discussion on the influence of coal rank and tectonic stress intensity on mechanical properties of coal.” [In Chinese.] Coal Sci. Technol. 47 (9): 1–7.
Cao, S. Q., Y. B. Liu, Y. Li, and L. Q. Zhang. 2009. “Experimental study on acoustic emission characteristics of coal rock at different confining pressure.” J. Chongqing Univ. 32 (11): 1321–1326.
Darabi, M. K., R. K. A. Al-rub, and D. N. Little. 2012. “A continuum damage mechanics framework for modeling micro-damage healing.” Int. J. Solids Struct. 49 (3–4): 492–513. https://doi.org/10.1016/j.ijsolstr.2011.10.017.
Fan, Z. Q., Z.-H. Jin, and S. E. Johnson. 2010. “Subcritical propagation of an oil-filled penny-shaped crack during kerogen–oil conversion.” Geophys. J. Int. 182 (3): 1141–1147. https://doi.org/10.1111/j.1365-246X.2010.04689.x.
Fan, Z. Q., Z.-H. Jin, and S. E. Johnson. 2012. “Modelling petroleum migration through microcrack propagation in transversely isotropic source rocks.” Geophys. J. Int. 190 (1): 179–187. https://doi.org/10.1111/j.1365-246X.2012.05516.x.
Feng, F., X. Li, J. Rostami, D. Peng, D. Li, and K. Du. 2019. “Numerical investigation of hard rock strength and fracturing under polyaxial compression based on Mogi-Coulomb failure criterion.” Int. J. Geomech. 19 (4): 04019005. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001352.
Hossain, M. M., and M. K. Rahman. 2008. “Numerical simulation of complex fracture growth during tight reservoir stimulation by hydraulic fracturing.” J. Pet. Sci. Eng. 60 (2): 86–104. https://doi.org/10.1016/j.petrol.2007.05.007.
Hua, Y., W. Nie, W. Wei, Q. Liu, Y. Liu, and H. Peng. 2018. “Research on multi-radial swirling flow for optimal control of dust dispersion and pollution at a fully mechanized tunnelling face.” Tunnelling Underground Space Technol. 79: 293–303. https://doi.org/10.1016/j.tust.2018.05.018.
Ishida, T., Y. Chen, Z. Bennour, H. Yamashita, S. Inu, Y. Nagaya, M. Naoi, Q. Chen, Y. Nakayama, and Y. Nagano. 2016. “Features of CO2 fracturing deduced from acoustic emission and microscopy in laboratory experiments.” J. Geophys. Res. 121 (11): 8080–8098. https://doi.org/10.1002/2016JB013365.
Kong, X., E. Wang, S. Hu, Z. Li, X. Liu, B. Fang, and T. Zhan. 2015. “Critical slowing down on acoustic emission characteristics of coal containing methane.” J. Nat. Gas Sci. Eng. 24: 156–165. https://doi.org/10.1016/j.jngse.2015.03.020.
Kong, X., E. Wang, S. Hu, R. Shen, X. Li, and T. Zhan. 2016. “Fractal characteristics and acoustic emission of coal containing methane in triaxial compression failure.” J. Appl. Geophys. 124: 139–147. https://doi.org/10.1016/j.jappgeo.2015.11.018.
Laubach, S. E., R. A. Marrett, J. E. Olson, and A. R. Scott. 1998. “Characteristics and origins of coal cleat: A review.” Int. J. Coal Geol. 35 (1–4): 175–207. https://doi.org/10.1016/S0166-5162(97)00012-8.
Law, B. E. 1993. “The Relationship between coal rank and cleat spacing: implications for the prediction of permeability in coal.” In Proc., 1993 International Coalbed Methane Symposium, 435–441. Tuscaloosa, AL: University of Alabama.
Lemaitre, J. 1984. “How to use damage mechanics.” Nucl. Eng. Des. 80 (2): 233–245. https://doi.org/10.1016/0029-5493(84)90169-9.
Levine, J. R. 1993. “Coalification: The evolution of coal as source rock and reservoir rock for Oil and Gas.” In Studies in geology Vol. 38: Hydrocarbons from coal, edited by B. E. Law, and D. D. Rice, 39–77. Tulsa: American Association of Petroleum Geologists.
Li, G., D. Yan, X. Zhuang, Z. Zhang, and H. Fu. 2019. “Implications of the pore pressure and in situ stress for the coalbed methane exploration in the southern Junggar Basin, China.” Eng. Geol. 262: 105305. https://doi.org/10.1016/j.enggeo.2019.105305.
Liang, Y., Y. Cheng, Q. Zou, W. Wang, Y. Ma, and Q. Li. 2017a. “Response characteristics of coal subjected to hydraulic fracturing: An evaluation based on real-time monitoring of borehole strain and acoustic emission.” J. Nat. Gas Sci. Eng. 38: 402–411. https://doi.org/10.1016/j.jngse.2017.01.001.
Liang, Y., Q. Li, Y. Gu, and Q. Zou. 2017b. “Mechanical and acoustic emission characteristics of rock: Effect of loading and unloading confining pressure at the postpeak stage.” J. Nat. Gas Sci. Eng. 44: 54–64. https://doi.org/10.1016/j.jngse.2017.04.012.
Liu, Q., W. Nie, Y. Hua, H. Peng, C. Liu, and C. Wei. 2019a. “Research on tunnel ventilation systems: Dust diffusion and pollution behaviour by air curtains based on CFD technology and field measurement.” Build. Environ. 147: 444–460. https://doi.org/10.1016/j.buildenv.2018.08.061.
Liu, S., and S. Harpalani. 2013. “Permeability prediction of coalbed methane reservoirs during primary depletion.” Int. J. Coal Geol. 113: 1–10. https://doi.org/10.1016/j.coal.2013.03.010.
Liu, X., J. Yu, J. Kang, and Q. Hao. 2019b. “Study on strength and deformation characteristics of coal-rock under different confining pressures.” [In Chinese.] Chin. J. Underground Space Eng. 15 (5): 1341–1352.
Lockner, D. 1993. “The role of acoustic emission in the study of rock fracture.” Int. J. Rock Mech. Min. Sci. 30 (7): 883–899. https://doi.org/10.1016/0148-9062(93)90041-B.
Louis, C. 1969. A study of groundwater flow in jointed rock and its influence on the stability of rock masses. London: Imperial College of Science and Technology.
Medhurst, T. P., and E. T. Brown. 1998. “A study of the mechanical behaviour of coal for pillar design.” Int. J. Rock Mech. Min. Sci. 35 (8): 1087–1105. https://doi.org/10.1016/S0148-9062(98)00168-5.
Meng, Y., and Z. Li. 2016. “Experimental study on diffusion property of methane gas in coal and its influencing factors.” Fuel 185: 219–228. https://doi.org/10.1016/j.fuel.2016.07.119.
Meng, Z., and G. Li. 2013. “Experimental research on the permeability of high-rank coal under a varying stress and its influencing factors.” Eng. Geol. 162: 108–117. https://doi.org/10.1016/j.enggeo.2013.04.013.
Meng, Z., B. Wang, X. Xie, Y. Xue, and X. Du. 2012. “Mechanical properties of coal deformation and its influence on permeability.” [In Chinese.] J. China Coal Soc. 37 (8): 1342–1347.
Miao, Y., X. Li, Y. Zhou, K. Wu, Y. Chang, Z. Xiao, N. Wu, and W. Lin. 2018. “A dynamic predictive permeability model in coal reservoirs: Effects of shrinkage behavior caused by water desorption.” J. Pet. Sci. Eng. 168: 533–541. https://doi.org/10.1016/j.petrol.2018.05.028.
Naoi, M., et al. 2018. “Monitoring hydraulically-induced fractures in the laboratory using acoustic emissions and the fluorescent method.” Int. J. Rock Mech. Min. Sci. 104: 53–63. https://doi.org/10.1016/j.ijrmms.2018.02.015.
Pan, J., Z. Meng, Q. Hou, Y. Ju, and Y. Cao. 2013. “Coal strength and young’s modulus related to coal rank, compressional velocity and maceral composition.” J. Struct. Geol. 54: 129–135. https://doi.org/10.1016/j.jsg.2013.07.008.
Pan, Z., and L. D. Connell. 2011. “Modelling of anisotropic coal swelling and its impact on permeability behaviour for primary and enhanced coalbed methane recovery.” Int. J. Coal Geol. 85 (3–4): 257–267. https://doi.org/10.1016/j.coal.2010.12.003.
Poulsen, B. A., B. Shen, D. J. Williams, C. Huddlestone-holmes, N. Erarslan, and J. Qin. 2014. “Strength reduction on saturation of coal and coal measures rocks with implications for coal pillar strength.” Int. J. Rock Mech. Min. Sci. 71: 41–52. https://doi.org/10.1016/j.ijrmms.2014.06.012.
Ren, F. 2018. “Mechanical properties and failure modes of coal and rock under triaxial compression.” [In Chinese.] Safety Coal Mines 49 (1): 37–40.
Shen, B., O. Stephansson, M. Rinne, K. Amemiya, R. Yamashi, S. Toguri, and H. Asano. 2011. “FRACOD modeling of rock fracturing and permeability change in excavation-damaged zones.” Int. J. Geomech. 11 (4): 302–313. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000034.
Song, H., Y. Jiang, D. Elsworth, Y. Zhao, J. Wang, and B. Liu. 2018. “Scale effects and strength anisotropy in coal.” Int. J. Coal Geol. 195: 37–46. https://doi.org/10.1016/j.coal.2018.05.006.
Tang, S., M. Tong, J. Hu, and X. He. 2010. “Characteristics of acoustic emission signals in damp cracking coal rocks.” Min. Sci. Technol. 20 (1): 143–147. https://doi.org/10.1016/S1674-5264(09)60176-9.
Ting, F. T. C. 1977. “Origin and spacing of cleats in coal beds.” J. Pressure Vessel Technol. 99 (4): 624–626.
Vishal, V., P. G. Ranjith, and T. N. Singh. 2015. “An experimental investigation on behaviour of coal under fluid saturation, using acoustic emission.” J. Nat. Gas Sci. Eng. 22: 428–436. https://doi.org/10.1016/j.jngse.2014.12.020.
Xie, H., and Z. Chen. 1988. “Study of a rock model with continuous damage mechanics.” [In Chinese.] J. China Coal Soc. 1: 33–42.
Xu, J., J. Geng, S. Peng, D. Liu, and W. Ye. 2015. “Acoustic emission characteristics of coal and gas outburst under different moisture contents.” [In Chinese.] J. China Coal Soc. 40 (5): 1047–1054.
Yamamoto, K., T. Shimamoto, and S. Sukemura. 2004. “Multiple fracture propagation model for a three-dimensional hydraulic fracturing simulator.” Int. J. Geomech. 4 (1): 46–57. https://doi.org/10.1061/(ASCE)1532-3641(2004)4:1(46).
Yan, C., and H. Zheng. 2017. “Three-dimensional hydromechanical model of hydraulic fracturing with arbitrarily discrete fracture networks using finite-discrete element method.” Int. J. Geomech. 17 (6): 04016133. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000819.
Yang, S. 2016. “Experimental study on deformation, peak strength and crack damage behavior of hollow sandstone under conventional triaxial compression.” Eng. Geol. 213: 11–24. https://doi.org/10.1016/j.enggeo.2016.08.012.
Yang, S.-Q., P. Xu, and P. G. Ranjith. 2015. “Damage model of coal under creep and triaxial compression.” Int. J. Rock Mech. Min. Sci. 80: 337–345. https://doi.org/10.1016/j.ijrmms.2015.10.006.
Yang, Y., Y. Song, and S. Chen. 2006. “Test study of coal’s strength and deformation characteristices under triaxial compression.” [In Chinese.] J. China Coal Soc. 31 (2): 150–153.
Yao, Y., D. Liu, D. Tang, S. Tang, and W. Huang. 2010. “Influence and control of coal petrological composition on the development of microfracture of coal reservoir in the Qinshui Basin.” [In Chinese.] J. China Univ. Min. Technol. 39 (1): 6–13.
Yin, G., H. Qin, and G. Huang. 2013. “Experimental study of characteristics of seepage and acoustic emission of gas-filled coal under different stress path.” [In Chinese.] Chin. J. Rock Mech. Eng. 32 (7): 1315–1320.
Yin, G., H. Qin, G. Huang, Y. Lv, and Z. Dai. 2012. “Acoustic emission from gas-filled coal under triaxial compression.” Int. J. Min. Sci. Technol. 22: 775–778. https://doi.org/10.1016/j.ijmst.2012.11.005.
Zagorščak, R., and H. R. Thomas. 2018. “Effects of subcritical and supercritical CO2 sorption on deformation and failure of high-rank coals.” Int. J. Coal Geol. 199: 113–123. https://doi.org/10.1016/j.coal.2018.10.002.
Zhao, M. D., D. L. Dong, and K. Tian. 2017. “Change mechanism simulation study of the overlying strata temperature field and fracture field in UCG.” [In Chinese.] J Mining Sci. Technol. 2 (1): 1–6.
Zhong, S., F. Baitalow, M. Reinmöller, and B. Meyer. 2019. “Relationship between the tensile strength of irregularly shaped coal particles and various fuel properties.” Fuel 236: 92–99. https://doi.org/10.1016/j.fuel.2018.08.140.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jul 29, 2019
Accepted: Feb 24, 2020
Published online: Jun 9, 2020
Published in print: Aug 1, 2020
Discussion open until: Nov 9, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.