Numerical Modeling of the Lateral Behavior of Concrete-Filled FRP Tube Piles in Sand
Publication: International Journal of Geomechanics
Volume 20, Issue 8
Abstract
In this study, a numerical model is developed to study concrete-filled FRP tube (CFFT) pile behavior and interactions with foundation soil under lateral loading. The model, based on nonlinear finite element analysis (NFEA) and the disturbed state concept (DSC), considers material and geometrical nonlinearity as well as the interface of soil with fiber-reinforced polymer (FRP). Furthermore, the structural and geotechnical performance of the interface of soil and CFFT pile is studied by utilizing 3D finite element models (FEMs) of full-scale field tests conducted during the construction of a highway bridge on Route 40 in Virginia. Based on deflection along the length of the pile, the model results are in good agreement with the experimental data. To investigate the effects of various parameters on the behavior of CFFT piles and local buckling, a parametric study was also performed on different geometrical and material properties, including the pile diameter to length ratio, FRP tube thickness, concrete strength, and soil properties. It was found that the surrounding soil and length to diameter ratio exerted the most noticeable influence, followed by concrete strength. The FRP thickness had the least impact on the results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to acknowledge the Natural Sciences and Engineering Research Council of Canada for providing financial support.
References
Achmus, M., Y.-S. Kuo, and K. Abdel-Rahman. 2009. “Behavior of monopile foundations under cyclic lateral load.” Comput. Geotech. 36 (5): 725–735. https://doi.org/10.1016/j.compgeo.2008.12.003.
ACI. 2014. Building code requirements for structural concrete and commentary. ACI 318. Farmington Hills, MI: ACI.
Batdorf, S. B. 1947. A simplified method of elastic-stability analysis for thin cylindrical shells. Technical Note No. #1342. Washington, DC: NACA.
Bowles, J. E. 1997. Foundation analysis and design. 5th ed. New York: McGraw-Hill.
CGS (Canadian Geotechnical Society). 2006. Canadian foundation engineering manual. 4th ed. Richmond, BC, Canada: BiTech Publishers.
Chae, K. S., K. Ugai, and A. Wakai. 2004. “Lateral resistance of short single piles and pile groups located near slopes.” Int. J. Geomech. 4 (2): 93–103. https://doi.org/10.1061/(ASCE)1532-3641(2004)4:2(93).
Desai, C. S. 2001. Mechanics of materials and interfaces: The disturbed state concept. Boca Rotan, FL: CRC Press.
Desai, C. S. 2015. “Constitutive modeling of materials and contacts using the disturbed state concept: Part 1—Background and analysis.” Comput. Struct. 146: 214–233. https://doi.org/10.1016/j.compstruc.2014.07.018.
Fam, A., B. Flisak, and S. Rizkalla. 2003a. “Experimental and analytical modeling of concrete-filled FRP tubes subjected to combined bending and axial loads.” ACI Struct. J. 100 (4): 499–509.
Fam, A., M. Pando, G. Filz, and S. Rizkalla. 2003b. “Precast piles for Route 40 bridge in Virginia using concrete filled FRP tubes.” PCI J. 48 (3): 32–45. https://doi.org/10.15554/pcij.05012003.32.45.
Fam, A., and S. H. Rizkalla. 2001a. “Behavior of axially loaded concrete-filled circular FRP tubes.” ACI Struct. J. 98 (3): 280–289.
Fam, A. Z., and S. H. Rizkalla. 2001b. “Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes.” ACI Struct. J. 98 (4): 451–461.
Han, F., M. Prezzi, and R. Salgado. 2017. “Energy-based solutions for nondisplacement piles subjected to lateral loads.” Int. J. Geomech. 17 (11): 04017104. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001012.
Hazzar, L., M. N. Hussien, and M. Karray. 2017. “Vertical load effects on the lateral response of piles in layered media.” Int. J. Geomech. 17 (9): 04017078. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000970.
Helmi, K., A. Fam, and A. Mufti. 2005. “Field installation, splicing, and flexural testing of hybrid FRP/concrete piles.” In Int. Symp.: 7th, Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures, Special Publication 230, 1103–1120. Farmington Hills, MI: ACI.
Khoei, A. R. 2005. Finite deformation plasticity. Chap. 8 in Computational Plasticity in Powder Forming Processes, 246–293. Oxford, UK: Elsevier Ltd.
Kulhawy, F. H., and P. W. Mayne. 1990. Manual on estimating soil properties for foundation design. Rep. No. EPRI-EL-6800. Palo Alto, CA: Electric Power Research Institute.
Liang, F., H. Chen, and W. D. Guo. 2013a. “Simplified boundary element method for kinematic response of single piles in two-layer soil.” J. Appl. Math. 2013: 241482. https://doi.org/10.1155/2013/241482.
Liang, F., F. Yu, and J. Han. 2013b. “A simplified analytical method for response of an axially loaded pile group subjected to lateral soil movement.” KSCE J. Civ. Eng. 17 (2): 368–376. https://doi.org/10.1007/s12205-013-1816-5.
Mirmiran, A., and M. Shahawy. 1996. “A new concrete-filled hollow FRP composite column.” Composites Part B 27 (3–4): 263–268. https://doi.org/10.1016/1359-8368(95)00019-4.
Mirmiran, A., and M. Shahawy. 1997. “Behavior of concrete columns confined by fiber composites.” J. Struct. Eng. 123 (5): 583–590. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(583).
Odland, J. 1978. “Buckling resistance of unstiffened and stiffened circular cylindrical shell structures.” Norw. Marit. Res. 6 (3): 2–22.
Pando, M. A., C. D. Ealy, G. M. Filz, J. J. Lesko, and E. J. Hoppe. 2006. A laboratory and field study of composite piles for bridge substructures. Rep. No. FHWA-HRT-04-043. McLean, VA: FHWA.
Poulos, H. G. 2014. “Challenges in the design of tall building foundations.” Geotech. Eng. J. 45 (4): 108–113.
Roddenberry, M., P. Mtenga, and K. Joshi. 2014. Investigation of carbon fiber composite cables (CFCC) in prestressed concrete piles. Tallahassee, FL: Florida State Univ.
Schmertmann, J. H. 1975. “Measurement of in situ shear strength.” In Proc., ASCE Spec. Conf. In Situ Measurement of Soil Properties, Vol. 2, 57–138. Reston, VA: ASCE.
Su, D., and Y. G. Zhou. 2016. “Effect of loading direction on the response of laterally loaded pile groups in Sand.” Int. J. Geomech. 16 (2): 04015051. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000544.
Valez, G. J., and M. T. Rayhani. 2017. “Axial and lateral load transfer of fibre-reinforced polymer (FRP) piles in soft clay.” Int. J. Geotech. Eng. 11 (2): 149–155. https://doi.org/10.1080/19386362.2016.1198109.
Zhang, L., M. Zhao, and X. Zou. 2015. “Behavior of laterally loaded piles in multilayered soils.” Int. J. Geomech. 15 (2): 06014017. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000319.
Zhao, J. 2000. “Applicability of Mohr–Coulomb and Hoek–Brown strength criteria to the dynamic strength of brittle rock.” Int. J. Rock Mech. Min. Sci. 37 (7): 1115–1121. https://doi.org/10.1016/S1365-1609(00)00049-6.
Zienkiewicz, O. C., and R. L. Taylor. 2005. The finite element method for solid and structural mechanics. Oxford, UK: Butterworth-Heinemann.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 11, 2019
Accepted: Jan 16, 2020
Published online: May 20, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.