Probabilistic Predictions of the Convergences of Surrounding Rock Masses in Underground Rock Caverns
Publication: International Journal of Geomechanics
Volume 20, Issue 5
Abstract
The convergences of surrounding rock masses are important indexes which can be used to evaluate the stability levels of underground rock excavations. The predictions and control of convergences are essential tasks to ensure that safety measures are met in such rock excavation processes as mining, tunneling, and underground constructions. Meanwhile, many uncertainties are associated with the predictions of convergences due to the complexity and nonlinearity of rock mechanical behaviors. However, such uncertainties had not been considered in previous studies. In this paper, a novel method was proposed to predict the convergences and uncertainties of surrounding rock masses in underground caverns. In the present study, a relevance vector machine (RVM) was adopted to build the relationships between the convergence displacement and mechanical parameters of the rock masses. Numerical simulations and experimental designs were used to provide the samples for the RVM model. Then, Monte Carlo simulation (MCS) was utilized to simulate the uncertainties of the convergences based on the RVM model. The proposed method was verified using different examples with the simulated uncertainties. The results showed that the proposed method had the ability to reasonably predict the convergences and their related uncertainties. When compared with the deterministic method, the proposed method was found to be more rational and scientific and had also conformed to rock engineering practices. Therefore, the proposed method provided a scientific way to predict convergences and displacement uncertainties of surrounding rock masses in underground caverns.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the support of the National Natural Science Foundation of China (Grant No. U1765206, 51621006) and the Program for Innovative Research Teams (in Science and Technology) of the University of Henan Province (No. 15IRTSTHN029).
References
Agarwal, A., and B. Triggs. 2004. “3D human pose from silhouettes by relevance vector regression.” In Proc., IEEE Int. Conf. Computer Vision and Pattern Recognition, 882–888. New York: IEEE.
Cao, Z. J., and Y. Wang. 2013. “Bayesian approach for probabilistic site characterization using cone penetration tests.” J. Geotech. Geoenviron. Eng. 139 (2): 267–276. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000765.
Carranza-Torres, C., and C. Fairhurst. 2000. “Application of the convergence-confinement method of tunnel design to rock masses that satisfy the Hoek–Brown failure criterion.” Tunnelling Underground Space Technol. 15 (2): 187–213.
Chen, S., S. R. Gunn, and C. J. Harris. 2001. “The relevance vector machine technique for channel equalization application.” IEEE Trans. Neural Networks 12 (6): 1529–1532.
Deere, D. U., R. B. Peck, H. W. Parker, J. E. Monsees, and B. Schmidt. 1970. “Design of tunnel support systems.” In Proc., 49th Annual Meeting of the Highway Research Board, 26–33. Washington DC: Committee on Soil and Rock Properties.
Deng, J., D. Gu, and X. Li. 2005. “Structural reliability analysis for implicit performance functions using artificial neural network.” Struct. Saf. 27 (1): 25–48.
Duncan, F. M. E. 1983. “Numerical modelling of yield zones in weak rocks.” In Vol. 2 of Comprehensive rock engineering, edited by J. A. Hudson, 49–75. Oxford, UK: Pergamon.
Einstein, H. H., and C. W. Schwartz. 1979. “Simplified analysis for tunnel supports.” J. Geotech. Eng. Div. 105 (4): 499–518.
Feng, X. T., H. B. Zhao, and S. J. Li. 2004. “A new displacement back analysis to identify mechanical geo-material parameters based on hybrid intelligent methodology.” Int. J. Numer. Anal. Meth. Geomech. 28 (11): 1141–1165.
Fenner, R. 1938. “Untersuchungen zur Erkenntnis des Gebirgsdruks.” Glückauf 74: 681–685.
Gomes, H. M., and A. M. Awruch. 2004. “Comparison of response surface and neural network with other methods for structural reliability analysis.” Struct. Saf. 26 (1): 49–67.
Hoek, E. 1998. “Reliability of Hoek–Brown estimates of rock mass properties and their impact on design.” Int. J. Rock Mech. Min. Sci. 35 (1): 63–68.
Hoek, E. 2000. “Big tunnels in bad rock, Terzaghi lecture.” J. Geotech. Geoenviron. Eng. 127 (9): 726–740. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:9(726).
Hoek, E., and Brown, E. T. 1980. Underground excavations in rock. London: CRC Press.
Li, H. Z., and B. K. Low. 2010. “Reliability analysis of circular tunnel under hydrostatic stress field.” Comput. Geotech. 37 (1–2): 50–58.
Li, S., X. T. Feng, Z. H. Li, B. R. Chen, C. Q. Zhang, and H. Zhou. 2012. “In situ monitoring of rockburst nucleation and evolution in the deeply buried tunnels of Jinping II hydropower station.” Eng. Geol. 137–138: 85–96.
Li, S., X. T. Feng, Z. H. Li, and J. A. Hudson. 2013. “ISRM suggested method for measuring rock mass displacement using a sliding micrometer.” Rock Mech. Rock Eng. 46 (3): 645–653.
Li, S., H. Zhao, and Z. Ru. 2017. “Relevance vector machine-based response surface for slope reliability analysis.” Int. J. Numer. Anal. Methods Geomech. 41 (11): 1332–1346.
Li, T., and X. Yang. 2018. “Reliability analysis of tunnel face in broken soft rocks using improved response surface method.” Int. J. Geomech. 18 (5): 04018021. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001129.
Lilly, P. A., and J. Li. 2000. “Estimating excavation reliability from displacement modeling.” Int. J. Rock Mech. Min. Sci. 37 (8): 1261–1265.
Lv, Q., and B. K. Low. 2011. “Probabilistic analysis of underground rock excavations using response surface method and SORM.” Comput. Geotech. 38 (8): 1008–1021.
Mezger, F., G. Anagnostou, and H. J. Ziegler. 2013. “The excavation-induced convergences in the Sedrun section of the Gotthard Base Tunnel.” Tunnelling Underground Space Technol. 38: 447–463.
Mollon, G., D. Dias, and A. H. Soubra. 2009. “Probabilistic analysis and design of circular tunnels against face stability.” Int. J. Geomech. 9 (6): 237–249. https://doi.org/10.1061/(ASCE)1532-3641(2009)9:6(237).
Morgan, H. D. 1961. “A contribution to the analysis of stress in a circular tunnel.” Géotechnique 11 (1): 37–46.
Morteza, R., R. Reza, R. Mohammad, and G. Kamal. 2017. “Evaluation of the maximum horizontal displacement around the power station caverns using artificial neural network.” Tunnelling Underground Space Technol. 64: 51–60.
Oreste, P. 2005. “A probabilistic design approach for tunnel supports.” Comput. Geotech. 32 (7): 520–534.
Oreste, P. P. 2003. “Analysis of structural interaction in tunnels using the covergence–confinement approach.” Tunnelling Underground Space Technol. 18 (4): 347–363.
Sakurai, S. 1983. “Displacement measurements associated with the design of underground openings.” In Vol. 2 of Proc., Int. Symp. on Field Measurements in Geomechanics, Zurich, 1163–1178. Rotterdam, Netherlands: A.A. Balkema.
Serrano, A., C. Olalla, and I. Reig. 2001. “Convergence of circular tunnels in elastoplastic rock masses with non-linear failure criteria and non-associated flow laws.” Int. J. Rock Mech. Min. Sci. 48 (6): 878–887.
Tan, X. H., W. H. Bi, and X. L. Hou. 2011. “Reliability analysis using radial basis function networks and support vector machines.” Comput. Geotech. 38 (2): 178–186.
Tipping, M. 2001. “Sparse Bayesian learning and the relevance vector machine.” J. Mach. Learn. Res. 1: 211–244.
Tiwari, G., B. Pandit, M. L. Gali, and G. Babu. 2018. “Analysis of tunnel support requirements using deterministic and probabilistic approaches in average quality rock mass.” Int. J. Geomech. 18 (4): 04018017. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001113.
Wood, M. A. M. 1975. “The circular tunnel in elastic ground.” Géotechnique 25: 115–127.
Ye, K. Q. 1998. “Orthogonal column Latin hypercubes and their application in computer experiments.” J. Am. Stat. Assoc. 93 (444): 1430–1439.
Zhao, H. 2008. “Slope reliability analysis using a support vector machine.” Comput. Geotech. 35 (3): 459–467.
Zhao, H., Z. Ru, and X. Chang. 2014. “Reliability analysis of tunnel using least square support vector machine.” Tunnelling Underground Space Technol. 41: 14–23.
Zhao, H., Z. Ru, and S. Yin. 2012. “Relevance vector machine applied to slope stability analysis.” Int. J. Numer. Anal. Methods Geomech. 36 (5): 643–652.
Zhou, X. P., X. C. Huang, and J. X. Li. 2018. “Reliability assessment of tunnel based on P-wave seismic velocity.” Int. J. Geomech. 18 (11): 06018030. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001245.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 2, 2019
Accepted: Oct 15, 2019
Published online: Mar 16, 2020
Published in print: May 1, 2020
Discussion open until: Aug 17, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.