Reliability of Shape Factors for Bearing Capacity of Square Footings on Spatially Varying Cohesive Soils
Publication: International Journal of Geomechanics
Volume 20, Issue 3
Abstract
Shape factors traditionally are used to relate the bearing capacity of square, rectangular, and/or circular footings to that of strip footings in geotechnical foundation designs, in order to take account of additional resistances developed in front of and behind strip footings. They traditionally are determined by experimental observations or deterministic analysis assuming uniform soil profiles. However, soils are spatially varying, and this variability can have a substantial influence on the bearing capacity of foundations resting on them. Therefore, the empirical shape factors used in foundation designs are quite uncertain, depending on the in situ soil variability. This paper investigated how soil spatial variability may affect the shape factors for the bearing capacity of square footings and the reliability of the traditionally determined shape factors. By quantifying the uncertainties involved, shape factors can be chosen based on site conditions and a target reliability. It was found that the traditional shape factor used in design has the lowest reliability for sites with intermediate soil spatial variability, and thus lower shape factors may be warranted to attain a required reliability in such cases.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
The first author appreciates the financial support of the National Natural Science Foundation of China (No. 41807228) and the Fundamental Research Funds for the Central Universities (No. 2652017071).
References
Al-Bittar, T., A.-H. Soubra, and J. Thajeel. 2018. “Kriging-based reliability analysis of strip footings resting on spatially varying soils.” J. Geotech. Geoenviron. Eng. 144 (10): 04018071. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001958.
Asaoka, A., and D. A. Grivas. 1982. “Spatial variability of the undrained strength of clays.” J. Geotech. Eng. Div. 108 (5): 743–756.
Baecher, G. B. 1983. “Simplified geotechnical data analysis.” In Reliability theory and its application in structural and soil mechanics, 257–277. New York: Springer.
Bergado, D. T., B. C. Patron, W. Youyongwatana, and J.-C. Chai. 1994. “Reliability-based analysis of embankment on soft Bangkok clay.” Struct. Saf. 13 (4): 247–266. https://doi.org/10.1016/0167-4730(94)90032-9.
Bowles, L. 1996. Foundation analysis and design. New Delhi, India: McGraw-Hill.
Chen, G., J. Zhu, M. Qiang, and W. Gong. 2018. “Three-dimensional site characterization with borehole data–a case study of suzhou area.” Eng. Geol. 234 (Feb): 65–82. https://doi.org/10.1016/j.enggeo.2017.12.019.
Chiasson, P., J. Lafleur, M. Soulié, and K. T. Law. 1995. “Characterizing spatial variability of a clay by geostatistics.” Can. Geotech. J. 32 (1): 1–10. https://doi.org/10.1139/t95-001.
Ching, J., and K.-K. Phoon. 2013. “Effect of element sizes in random field finite element simulations of soil shear strength.” Comput. Struct. 126 (Sep): 120–134. https://doi.org/10.1016/j.compstruc.2012.11.008.
DeGroot, D. J., and G. B. Baecher. 1993. “Estimating autocovariance of in-situ soil properties.” J. Geotech. Eng. 119 (1): 147–166. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:1(147).
Der Kiureghian, A., and J.-B. Ke. 1987. “The stochastic finite element method in structural reliability.” In Stochastic structural mechanics, 84–109. New York: Springer.
El Haj, A.-K., A.-H. Soubra, and J. Fajoui. 2019. “Probabilistic analysis of an offshore monopile foundation taking into account the soil spatial variability.” Comput. Geotech. 106 (Feb): 205–216. https://doi.org/10.1016/j.compgeo.2018.10.011.
El-Ramly, H., N. R. Morgenstern, and D. M. Cruden. 2003. “Probabilistic stability analysis of a tailings dyke on presheared clay shale.” Can. Geotech. J. 40 (1): 192–208. https://doi.org/10.1139/t02-095.
Fenton, G. A., and D. V. Griffiths. 2003. “Bearing-capacity prediction of spatially random c ϕ soils.” Can. Geotech. J. 40 (1): 54–65. https://doi.org/10.1139/t02-086.
Fenton, G. A., and D. V. Griffiths. 2004. “Reply to the discussion by R. Popescu on ‘bearing capacity prediction of spatially random c ϕ soils’.” Can. Geotech. J. 41 (2): 368–369. https://doi.org/10.1139/t03-080.
Fenton, G. A., and D. V. Griffiths. 2008. Risk assessment in geotechnical engineering. New York: Wiley.
Fenton, G. A., D. V. Griffiths, and X. Zhang. 2008. “Load and resistance factor design of shallow foundations against bearing failure.” Can. Geotech. J. 45 (11): 1556–1571. https://doi.org/10.1139/T08-061.
Fenton, G. A., G. Paice, and D. Griffiths. 1996. “Probabilistic analysis of foundation settlement.” In Uncertainty in the geologic environment: From theory to practice. Reston, VA: ASCE.
Fenton, G. A., and E. H. Vanmarcke. 1990. “Simulation of random fields via local average subdivision.” J. Eng. Mech. 116 (8): 1733–1749. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:8(1733).
Fenton, G. A., X. Zhang, and D. Griffiths. 2007. “Reliability of shallow foundations designed against bearing failure using LRFD.” Georisk 1 (4): 202–215. https://doi.org/10.1080/17499510701812844.
Gong, W., C. H. Juang, J. R. Martin, H. Tang, Q. Wang, and H. Huang. 2018. “Probabilistic analysis of tunnel longitudinal performance based upon conditional random field simulation of soil properties.” Tunnelling Underground Space Technol. 73 (Mar): 1–14. https://doi.org/10.1016/j.tust.2017.11.026.
Graettinger, A. J., and C. H. Dowding. 2001. “Quantifying exploration sufficiency while accommodating judgment.” Math. Geol. 33 (2): 133–153. https://doi.org/10.1023/A:1007579116990.
Griffiths, D., and G. A. Fenton. 2001. “Bearing capacity of spatially random soil: the undrained clay Prandtl problem revisited.” Geotechnique 51 (4): 351–359. https://doi.org/10.1680/geot.2001.51.4.351.
Griffiths, D., G. A. Fenton, and N. Manoharan. 2002. “Bearing capacity of rough rigid strip footing on cohesive soil: Probabilistic study.” J. Geotech. Geoenviron. Eng. 128 (9): 743–755. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:9(743).
Hicks, M. A., and Y. Li. 2018. “Influence of length effect on embankment slope reliability in 3D.” Int. J. Numer. Anal. Methods Geomech. 42 (7): 891–915. https://doi.org/10.1002/nag.2766.
Hicks, M. A., and K. Samy. 2002. “Influence of heterogeneity on undrained clay slope stability.” Q. J. Eng. Geol. Hydrogeol. 35 (1): 41–49. https://doi.org/10.1144/qjegh.35.1.41.
Honjo, Y., and K. Kuroda. 1991. “A new look at fluctuating geotechnical data for reliability design.” Soils Found. 31 (1): 110–120. https://doi.org/10.3208/sandf1972.31.110.
Juang, C. H., W. Gong, J. R. Martin, and Q. Chen. 2018. “Model selection in geological and geotechnical engineering in the face of uncertainty-does a complex model always outperform a simple model?” Eng. Geol. 242 (Aug): 184–196. https://doi.org/10.1016/j.enggeo.2018.05.022.
Kawa, M., W. Puła, and M. Suska. 2016. “Random analysis of bearing capacity of square footing using the LAS procedure.” Stud. Geotech. Mech. 38 (3): 3–13. https://doi.org/10.1515/sgem-2016-0021.
Kim, H. 2005. “Spatial variability in soils: Stiffness and strength.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Georgia Institute of Technology.
Kuo, Y., M. Jaksa, A. Lyamin, and W. Kaggwa. 2009. “ANN-based model for predicting the bearing capacity of strip footing on multi-layered cohesive soil.” Comput. Geotech. 36 (3): 503–516. https://doi.org/10.1016/j.compgeo.2008.07.002.
Lee, I. K., W. White, and O. G. Ingles. 1983. Geotechnical engineering. Melbourne, Australia: Pitman.
Li, C.-C., and A. Der Kiureghian. 1993. “Optimal discretization of random fields.” J. Eng. Mech. 119 (6): 1136–1154. https://doi.org/10.1061/(ASCE)0733-9399(1993)119:6(1136).
Li, D.-Q., S.-H. Jiang, Z.-J. Cao, W. Zhou, C.-B. Zhou, and L.-M. Zhang. 2015a. “A multiple response-surface method for slope reliability analysis considering spatial variability of soil properties.” Eng. Geol. 187 (Mar): 60–72. https://doi.org/10.1016/j.enggeo.2014.12.003.
Li, L., J. Li, J. Huang, and F.-P. Gao. 2017a. “Bearing capacity of spudcan foundations in a spatially varying clayey seabed.” Ocean Eng. 143 (Oct): 97–105. https://doi.org/10.1016/j.oceaneng.2017.05.026.
Li, L., J. Li, J. Huang, H. Liu, and M. J. Cassidy. 2017b. “The bearing capacity of spudcan foundations under combined loading in spatially variable soils.” Eng. Geol. 227 (Sep): 139–148. https://doi.org/10.1016/j.enggeo.2017.03.022.
Li, Y. J. 2017. “Reliability of long heterogeneous slopes in 3D: Model performance and conditional simulation.” Ph.D. thesis, Dept. of Geoscience and Engineering, Delft Univ. of Technology.
Li, Y. J., M. A. Hicks, and J. D. Nuttall. 2015b. “Comparative analyses of slope reliability in 3D.” Eng. Geol. 196 (Sep): 12–23. https://doi.org/10.1016/j.enggeo.2015.06.012.
Li, Y. J., M. A. Hicks, and P. J. Vardon. 2016. “Uncertainty reduction and sampling efficiency in slope designs using 3D conditional random fields.” Comput. Geotech. 79 (Oct): 159–172. https://doi.org/10.1016/j.compgeo.2016.05.027.
Matsuo, M. 1976. “Reliability in embankment design.” Ph.D. thesis, Dept. of Civil Engineering, Massachusetts Institute of Technology.
Matthies, H. G., C. E. Brenner, C. G. Bucher, and C. G. Soares. 1997. “Uncertainties in probabilistic numerical analysis of structures and solids-stochastic finite elements.” Struct. Saf. 19 (3): 283–336. https://doi.org/10.1016/S0167-4730(97)00013-1.
Meyerhof, G. 1951. “The ultimate bearing capacity of foudations.” Geotechnique 2 (4): 301–332. https://doi.org/10.1680/geot.1951.2.4.301.
Nobahar, A. 2003. “Effects of soil spatial variability on soil-structure interaction.” Ph.D. thesis, Dept. of Engineering and Applied Science, Memorial Univ. of Newfoundland.
Phoon, K.-K., and F. H. Kulhawy. 1999. “Characterization of geotechnical variability.” Can. Geotech. J. 36 (4): 612–624. https://doi.org/10.1139/t99-038.
Pieczyńska-Kozłowska, J., W. Puła, D. Griffiths, and G. Fenton. 2015. “Influence of embedment, self-weight and anisotropy on bearing capacity reliability using the random finite element method.” Comput. Geotech. 67 (Jun): 229–238. https://doi.org/10.1016/j.compgeo.2015.02.013.
Popescu, R. 2004. “Discussion of ‘bearing capacity prediction of spatially random c ϕ soils’.” Can. Geotech. J. 41 (2): 366–367. https://doi.org/10.1139/t03-081.
Prandtl, L. 1920. “Über die härte plastischer körper.” Nachr. Ges. Wiss. Göttingen, Math. -Phys. Kl. 12: 74–85.
Prandtl, L. 1921. “Hauptaufsätze: Über die eindringungsfestigkeit (härte) plastischer baustoffe und die festigkeit von schneiden.” ZAMM-J. Appl. Math. Mech./Z. Angew. Math. Mech. 1 (1): 15–20. https://doi.org/10.1002/zamm.19210010102.
Ronold, K. O. 1990. “Random field modeling of foundation failure modes.” J. Geotech. Eng. 116 (4): 554–570. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:4(554).
Skempton, A. W. 1951. “The bearing capacity of clays.” In Vol. 1 of Proc., Building Research Congress, 180–189. London: Institution of Civil Engineers.
Smith, I., and D. Kidger. 1992. “Elastoplastic analysis using the 14-node brick element family.” Int. J. Numer. Methods Eng. 35 (6): 1263–1275. https://doi.org/10.1002/nme.1620350607.
Smith, I. M., and D. V. Griffiths. 2005. Programming the finite element method. New York: Wiley.
Soubra, A.-H., D. S. Youssef Abdel Massih, and M. Kalfa. 2008. “Bearing capacity of foundations resting on a spatially random soil.” In Proc., GeoCongress 2008: Geosustainability and Geohazard Mitigation, 66–73. Reston, VA: ASCE.
Soulie, M., P. Montes, and V. Silvestri. 1990. “Modelling spatial variability of soil parameters.” Can. Geotech. J. 27 (5): 617–630. https://doi.org/10.1139/t90-076.
Tang, C., K.-K. Phoon, L. Zhang, and D.-Q. Li. 2017. “Model uncertainty for predicting the bearing capacity of sand overlying clay.” Int. J. Geomech. 17 (7): 04017015. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000898.
Terzaghi, K. 1943. Theoretical soil mechanics. New York: Wiley.
Vahdatirad, M. J., L. V. Andersen, L. B. Ibsen, J. Clausen, and J. D. Sørensen. 2013. “Probabilistic three-dimensional model of an offshore monopile foundation: Reliability based approach.” In Proc., 7th Int. Conf. on Case Histories in Geotechnical Engineering. Rolla, MO: Missouri Univ. of Science and Technology.
Vanmarcke, E. H. 1977a. “Probabilistic modeling of soil profiles.” J. Geotech. Eng. Div. 103 (11): 1227–1246.
Vanmarcke, E. H. 1977b. “Reliability of earth slopes.” J. Geotech. Eng. Div. 103 (11): 1247–1265.
Vanmarcke, E. H. 1978. “Probabilistic characterization of soil profiles.” In Site characterization & exploration, 199–219. Reston, VA: ASCE.
Vanmarcke, E. H. 1983. Random fields: Analysis and synthesis. Cambridge, MA: MIT Press.
Wu, T. H. 1974. “Uncertainty, safety, and decision in soil engineering.” J. Geotech. Eng. Div. 100 (3): 329–348.
Wu, Y., X. Zhou, Y. Gao, L. Zhang, and J. Yang. 2019. “Effect of soil variability on bearing capacity accounting for non-stationary characteristics of undrained shear strength.” Comput. Geotech. 110 (Jun): 199–210. https://doi.org/10.1016/j.compgeo.2019.02.003.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 20 • Issue 3 • March 2020
Copyright
©2019 American Society of Civil Engineers.
History
Received: Nov 9, 2018
Accepted: Aug 29, 2019
Published online: Dec 27, 2019
Published in print: Mar 1, 2020
Discussion open until: May 27, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.