Hierarchical Modeling Method for DEM Simulation and Its Application in Soil–Pile–Cap Interaction and Impact Case
Publication: International Journal of Geomechanics
Volume 19, Issue 7
Abstract
By developing a hierarchical modeling method, using discrete element analysis software PFC3D, a discrete-element method (DEM) model can be built and solved more efficiently. In this method, smaller particles are used for the concerned part, medium-sized particles are used in the transition zone, and larger particles are used for the part that is close to the model boundary. By adjusting the micromechanical parameters of the particles through simulated triaxial tests, the macroscopic mechanical properties of the soils constituted by different-sized particles are kept consistent. This method can be applied to study the soil–structure interaction problems with the DEM method by saving computation cost. The proposed method is verified by a two-dimensional (2D) simulation of a laboratory pile load test. This method is then further applied to investigate the pile–soil–cap interaction problem focusing on the pile cap effects. A geohazard-related impact case is also analyzed using this method.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research project was financially supported by the National Natural Science Foundation of China (11672066). The authors are greatly appreciated for this support, which made this study possible.
References
Bunce, M. C., M. D. Cruden, and R. N. Morgenstern. 1997. “Assessment of the hazard from rock fall on a highway.” Can. Geotech. J. 34 (3): 344–356. https://doi.org/10.1139/cgj-34-3-344.
Chen, W. F., and A. F. Salipu. 2005. Elasticity and plasticity. Beijing: China Architecture and Building Press.
Clancy, P., and M. F. Randolph. 1993. “An approximate analysis procedure for piled raft foundations.” Int. J. Numer. Anal. Methods Geomech. 17 (12): 849–869. https://doi.org/10.1002/nag.1610171203.
Cundall, P. A. 2001. “A discontinuous future for numerical modelling in geomechanics?” Proc. Inst. Civ. Eng. Geotech. Eng. 149 (1): 41–47. https://doi.org/10.1680/geng.2001.149.1.41.
Cundall, P. A., and O. D. L. Strack. 1979. “A discrete numerical model for granular assemblies.” Geotechnique 29 (1): 47–65. https://doi.org/10.1680/geot.1979.29.1.47.
Ezzein, F. M., and R. J. Bathurst. 2011. “A transparent sand for geotechnical laboratory modeling.” Geotech. Test. J. 34 (6): 590–601. https://doi.org/10.1520/GTJ103808.
Hamdi, P., D. Stead, and D. Elmo. 2014. “Damage characterization during laboratory strength testing: A 3D-finite-discrete element approach.” Comput. Geotech. 60: 33–46. https://doi.org/10.1016/j.compgeo.2014.03.011.
Hongladaromp, T., N. J. Chen, and S. L. Lee. 1973. “Load distribution in rectangular footings on piles.” Geotech. Eng. 4 (2): 77–90.
Indraratna, B., N. T. Ngo, C. Rujikiatkamjorn, and S. W. Sloan. 2015. “Coupled discrete element–finite difference method for analysing the load-deformation behaviour of a single stone column in soft soil.” Comput. Geotech. 63: 267–278. https://doi.org/10.1016/j.compgeo.2014.10.002.
Jenck, O., D. Dias, and R. Kastner. 2009. “Discrete element modelling of a granular platform supported by piles in soft soil – Validation on a small scale model test and comparison to a numerical analysis in a continuum.” Comput. Geotech. 36 (6): 917–927. https://doi.org/10.1016/j.compgeo.2009.02.001.
Kuwabara, F. 1989. “An elastic analysis for piled raft foundations in a homogeneous soil.” Soils Found. 29 (1): 82–92. https://doi.org/10.3208/sandf1972.29.82.
Lai, H.-J., J.-J. Zheng, J. Zhang, R.-J. Zhang, and L. Cui. 2014. “DEM analysis of “soil”-arching within geogrid-reinforced and unreinforced pile-supported embankments.” Comput. Geotech. 61: 13–23. https://doi.org/10.1016/j.compgeo.2014.04.007.
Li, Y., A. Dove, J. S. Curtis, and J. E. Colwell. 2016. “3D DEM simulations and experiments exploring low-velocity projectile impacts into a granular bed.” Powder Technol. 288: 303–314. https://doi.org/10.1016/j.powtec.2015.11.022.
Liu, W.-B., and J. Zhou. 2004. “Numerical simulation of particle flow code for pile under uplifting load.” Chin. J. Geotech. Eng. 26 (4): 516–521.
Lobo-Guerrero, S., and L. E. Vallejo. 2007. “Influence of pile shape and pile interaction on the crushable behavior of granular materials around driven piles: DEM analyses.” Granular Matter 9 (3–4): 241–250. https://doi.org/10.1007/s10035-007-0037-3.
Minh, N. H., and Y. P. Cheng. 2013. “A DEM investigation of the effect of particle-size distribution on one-dimensional compression.” Geotechnique 63 (1): 44–53. https://doi.org/10.1680/geot.10.P.058.
Ng, T.-T., and R. Meyers. 2015. “Side resistance of drilled shafts in granular soils investigated by DEM.” Comput. Geotech. 68: 161–168. https://doi.org/10.1016/j.compgeo.2015.04.009.
Peng, S. Y., C. W. W. Ng, and G. Zheng. 2014. “The dilatant behaviour of sand–pile interface subjected to loading and stress relief.” Acta Geotech. 9 (3): 425–437. https://doi.org/10.1007/s11440-013-0216-9.
Potyondy, D. O., and P. A. Cundall. 2004. “A bonded-particle model for rock.” Int. J. Rock Mech. Min. Sci. 41 (8): 1329–1364. https://doi.org/10.1016/j.ijrmms.2004.09.011.
Poulos, H. G. 1994. “An approximate numerical analysis of pile–raft interaction.” Int. J. Numer. Anal. Methods Geomech. 18 (2): 73–92. https://doi.org/10.1002/nag.1610180202.
Reul, O. 2004. “Numerical study of the bearing behavior of piled rafts.” Int. J. Geomech. 4 (2): 59–68. https://doi.org/10.1061/(ASCE)1532-3641(2004)4:2(59).
Savvateev, F. A., A. V. Budin, V. A. Kolikov, and Ph. G. Rutberg. 2001. “High-speed penetration into sand.” Int. J. Impact Eng. 26 (1–10): 675–681. https://doi.org/10.1016/S0734-743X(01)00132-4.
Senft, E. L., and S. T. Stewart. 2009. “Dynamic fault weakening and the formation of large impact craters.” Earth Planet. Sci. Lett. 287 (3-4): 471–482. https://doi.org/10.1016/j.epsl.2009.08.033.
Sinha, A., and A. M. Hanna. 2017. “3D numerical mode for piled raft foundation.” Int. J. Geomech. 17 (2): 04016055. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000674.
Ta, L. D., and J. C. Small. 1996. “Analysis of piled raft systems in layered soils.” Int. J. Numer. Anal. Methods Geomech. 20 (1): 57–72. https://doi.org/10.1002/(SICI)1096-9853(199601)20:1%3C57::AID-NAG807%3E3.0.CO;2-0.
Ta, L. D., and J. C. Small. 1997. “An approximation for analysis of raft and piled raft foundations.” Comput. Geotech. 20 (2): 105–123. https://doi.org/10.1016/S0266-352X(96)00012-2.
Tehrani, S. F., F. Han, R. Salgado, M. Prezzi, R. D. Tovar, and A. G. Castro. 2016. “Effect of surface roughness on the shaft resistance of non-displacement piles embedded in sand.” Geotechnique 66 (5): 386–400. https://doi.org/10.1680/jgeot.15.P.007.
Villard, P., B. Chevalier, B. Le Hello, and G. Combe. 2009. “Coupling between finite and discrete element methods for the modelling of earth structures reinforced by geosynthetic.” Comput. Geotech. 36 (5): 709–717. https://doi.org/10.1016/j.compgeo.2008.11.005.
Yamamoto, S., K. Wada, N. Okabe, and T. Matsui. 2006. “Transient crater growth in granular targets: An experimental study of low velocity impacts into glass sphere targets.” Icarus 183 (1): 215–224. https://doi.org/10.1016/j.icarus.2006.02.002.
Zhang, H. H., and J. C. Small. 2000. “Analysis of capped pile groups subjected to horizontal and vertical loads.” Comput. Geotech. 26 (1): 1–21. https://doi.org/10.1016/S0266-352X(99)00029-4.
Zhou, J., Q.-W. Jian, J. Zhang, and J.-J. Guo. 2012. “Coupled 3D discrete-continuum numerical modeling of pile penetration in sand.” J. Zhejiang Univ. Sci. A 13 (1): 44–55. https://doi.org/10.1631/jzus.A1100172.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Dec 8, 2017
Accepted: Mar 4, 2019
Published online: May 8, 2019
Published in print: Jul 1, 2019
Discussion open until: Oct 8, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.