Practice of Searching a Noncircular Critical Slip Surface in a Slope with Soil Variability
Publication: International Journal of Geomechanics
Volume 19, Issue 3
Abstract
An improved approach is proposed here for searching the global noncircular critical slip surface in a slope with soil variability. To avoid the local minimum, the proposed approach combines a readily available optimization with the simulated annealing algorithm (SAA). The simplified Morgenstern-Price method was used to calculate the factor of safety (Fs) for the generated slip surface. The reliability of the searching strategy was evaluated through the effect of vertices number and the position of the initial slip surface. Subsequently, the proposed method was used to analyze two example problems involving slope profiles with different geometries and strength fields. The results showed that the location of the initial slip surface had a negligible influence on the global critical slip surface as well as the corresponding factor of safety, if the annealing time was sufficient. The location of the global critical slip surface diverged when the segment number was greater than 3. The proposed approach can seek the relative global factor of safety with a calculation accuracy of 1 × 10−4, which is suitable for engineering use. The noncircular slip surface assumption was superior to the circular slip surface assumption for both the simple multilayered soil slope and the spatially variable soil slope with a low level of strength variation. However, the circular slip surface assumption will also locate more critical slip surfaces if the variation of soil strength reaches a high level. The critical Fs value was determined from the given random strength field other than the assumption of a circular or noncircular slip surface. The noncircular slip surface searching strategy can provide a useful supplement for the limited-equilibrium method (LEM) searching for the critical slip surface in a spatially variable soil slope. Practitioners can select the smaller Fs from these two different assumptions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (Grant 51508427), as well as the Natural Science Foundation of Hubei Province (Grant 2014CFB772). We express our gratitude to the editors and the reviewers for their constructive and helpful review comments.
References
Baecher, G. B., and J. T. Christian. 2003. Reliability and statistics in geotechnical engineering. New York: Wiley.
Bai, T., T. Qiu, X. M. Huang, and C. Li. 2014. “Locating global critical slip surface using the Morgenstern-Price method and optimization technique.” Int. J. Geomech. 14 (2): 319–325. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000312.
Bai, T., Z. G. Song, and D. Y. Zhang. 2017. “Locating global critical slip surface using the Morgenstern-Price method and simulated annealing algorithm.” In Proc., Int. Conf. on Transportation Infrastructure and Materials, 1–7. Qingdao, Shandong: The International Association of Chinese Infrastructure Professionals.
Bian, X. Y., X. Y. Chen, H. L. Lu, and J. J. Zheng. 2018a. “Determination of base and shaft resistance factors for reliability-based design of piles.” J. S. Afr. Inst. Civ. Eng. 60 (2): 53–60. https://doi.org/10.17159/2309-8775/2018/v60n2a6.
Bian, X. Y., J. J. Zheng, R. J. Zhang, and Z. J. Xu. 2018b. “Reliability analysis for serviceability limit state of pile groups foundation.” KSCE J. Civ. Eng. 22 (1): 54–61. https://doi.org/10.1007/s12205-017-0246-1.
Blake, T. F., R. A. Hollingsworth, and J. P. Stewart. 2002. Recommended procedures for implementation of DMG special publication 117: Guidelines for analyzing and mitigating landslide hazards in California. Los Angeles: Southern California Earthquake Center.
Chen, Z. Y., and N. R. Morgenstern. 1983. “Extensions to the generalized method of slices for stability analysis.” Can. Geotech. J. 20 (1): 104–119. https://doi.org/10.1139/t83-010.
Cheng, Y. M., L. Li, S. C. Chi, and W. B. Wei. 2007. “Particle swarm optimization algorithm for the location of the critical non-circular failure surface in two-dimensional slope stability analysis.” Comput. Geotech. 34 (2): 92–103. https://doi.org/10.1016/j.compgeo.2006.10.012.
Cho, S. E. 2010. “Probabilistic assessment of slope stability that considers the spatial variability of soil properties.” J. Geotech. Geoenviron. Eng. 136 (7): 975–984. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000309.
Donald, I. B., and P. Giam. 1992. “The ACADS slope stability programs review.” In Proc., 6th Int. Symp. on Landslides, edited by D. H. Bell, 1665–1770. Rotterdam, Netherlands: A. A. Balkema.
Duncan, M. J. 1996. “State of the art: Limit equilibrium and finite-element analysis of slopes.” J. Geotech. Eng. 122 (7): 577–596. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:7(577).
El-Ramly, H., N. R. Morgenstern, and D. M. Cruden. 2003. “Probabilistic stability analysis of a tailings dyke on presheared clay-shale.” Can. Geotech. J. 40 (1): 192–208. https://doi.org/10.1139/t02-095.
Fredlund, D. G. 1984. “Analytical methods for slope stability analysis.” In Proc., 4th Int. Symp. on Landslides, State-of-the-Art, 229–250. Toronto: Canadian Geotechnical Society.
Griffiths, D. V., and G. A. Fenton. 2004. “Probabilistic slope stability analysis by finite elements.” J. Geotech. Geoenviron. Eng. 130 (5): 507–518. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:5(507).
Griffiths, D. V., J. Huang, and G. A. Fenton. 2009. “Influence of spatial variability on slope reliability using 2-D random fields.” J. Geotech. Geoenviron. Eng. 135 (10): 1367–1378. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000099.
John, K. 2004. Stability modeling with SLOPE/W. Calgary, AB, Canada: GEO-SLOPE/W International Ltd.
Kirkpatrick, S., C. D. Gelatt, and M. P. Vecchi. 1983. “Optimization by simulated annealing.” Science 220 (4598): 671–680. https://doi.org/10.1126/science.220.4598.671.
Laarhoven, P. J. M. V., and E. H. L. Aarts. 1987. Simulated annealing: Theory and applications. Dordrecht, Netherlands: D. Reidel Publishing Company.
Liu, L. L., Y. M. Cheng, X. M. Wang, S. H. Zhang, and Z. H. Wu. 2017. “System reliability analysis and risk assessment of a layered slope in spatially variable soils considering stratigraphic boundary uncertainty.” Comput. Geotech. 89: 213–225. https://doi.org/10.1016/j.compgeo.2017.05.014.
Malkawi, A. I. H., W. F. Hassan, and S. K. Sarma. 2001. “Global search method for locating general slip surface using Monte Carlo techniques.” J. Geotech. Geoenviron. Eng. 127 (8): 688–698. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:8(688).
Masahiro, S. 2015. “Seismic stability and displacement analyses of earth slopes using non-circular slip surface.” Soils Found. 55 (2): 227–241.
Olsson, A. M. J., and G. E. Sandberg. 2002. “Latin hypercube sampling for stochastic finite element analysis.” J. Eng. Mech. 128 (1): 121–125. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(121).
Phoon, K. K., and F. H. Kulhawy. 1999. “Characterization of geotechnical variability.” Can. Geotech. J. 36 (4): 612–624. https://doi.org/10.1139/cgj-36-4-612.
Shi, L., B. Bai, and X. C. Li. 2017. “Stability analysis of prescribed slip surfaces based on a combination of the equilibrium equation and the critical unstable condition.” Int. J. Geomech. 17 (12): 04017118. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001034.
Subhadeep, M., M. Tanmoy, A. Sondipon, and B. Gautam. 2017. “System reliability analysis of soil slopes with general slip surfaces using multivariate adaptive regression splines.” Comput. Geotech. 87: 212–228.
Tabarroki, M., F. Ahmad, R. Banaki, S. K. Jha, and J. Ching. 2013. “Determining the factors of safety of spatially variable slopes modeled by random fields.” J. Geotech. Geoenviron. Eng. 139 (12): 2082–2095. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000955.
Vanmarcke, E. H. 1983. Random fields: Analysis and synthesis. Cambridge, MA: MIT Press.
Vořechovský, M. 2008. “Simulation of simply cross correlated random fields by series expansion methods.” Struct. Saf. 30 (4): 337–363. https://doi.org/10.1016/j.strusafe.2007.05.002.
Zhang, J. H., J. Li, Y. S. Yao, J. L. Zheng, and F. Gu. 2018a. “Geometric anisotropy modeling and shear behavior evaluation of graded crushed rocks.” Constr. Build. Mater. 183 (Sept): 346–355. https://doi.org/10.1016/j.conbuildmat.2018.06.188.
Zhang, J. H., J. H. Peng, J. L. Zheng, and Y. Yao. 2018b. “Characterisation of stress and moisture-dependent resilient behaviour for compacted clays in South China.” Road Mater. Pavement Des. https://doi.org/10.1080/14680629.2018.1481138.
Zhou, C. M., W. Shao, and W. C. J. Van. 2014. “Comparing two methods to estimate lateral force acting on stabilizing piles for a landslide in the Three Gorges Reservoir, China.” Eng. Geol. 173: 41–53. https://doi.org/10.1016/j.enggeo.2014.02.004.
Zhu, D. Y., C. F. Lee, and H. D. Jiang. 2003. “Generalised framework of limit equilibrium methods for slope stability analysis.” Géotechnique 53 (4): 377–395. https://doi.org/10.1680/geot.2003.53.4.377.
Zhu, D. Y., C. F. Lee, Q. H. Qian, and G. R. Chen. 2005. “A concise algorithm for computing the factor of safety using the Morgenstern–Price method.” Can. Geotech. J. 42 (1): 272–278. https://doi.org/10.1139/t04-072.
Zolfaghari, A. R., A. C. Heath, and P. F. McCombie. 2005. “Simple genetic algorithm search for critical non-circular failure surface in slope stability analysis.” Comput. Geotech. 32 (3): 139–152. https://doi.org/10.1016/j.compgeo.2005.02.001.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 19 • Issue 3 • March 2019
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Oct 20, 2017
Accepted: Aug 20, 2018
Published online: Dec 19, 2018
Published in print: Mar 1, 2019
Discussion open until: May 19, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.