Technical Papers
Sep 21, 2018

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Publication: International Journal of Geomechanics
Volume 18, Issue 12

Abstract

The preshearing history of soil is a prominent factor governing its mechanical behavior at various loading conditions. An experimental program was developed to study the effects of preshearing at drained compression and extension conditions on the undrained behavior of saturated sand. Triaxial compression and extension tests on both loose and medium-dense sand showed distinctly different behaviors: the response in compression was dominated by stable and dilative behavior, whereas instability occurred in extension with strain softening. The initial inclination of the effective stress path varying with the preloading history is related to the fabric anisotropy of the soils, characterized by their stiffness values at very small strains, whereas at intermediate to large strains, the undrained stiffness tends to decrease in triaxial compression but grows in triaxial extension with the preshearing stress ratio. Moreover, the instability behavior of sand characterized by the reduction of shear strength is governed by the magnitude and direction of the preshearing stress. The stress ratio at which the instability occurs is not unique and can be correlated with the proposed state index accounting for the combined influences of the preshearing stress and relative density of the sand. In contrast, a unique phase-transformation line exists that is independent of the preshearing stress conditions. This is probably due to the gradual diminishing of the stress-induced anisotropy that is created by the static preshearing during the subsequent undrained loading.

Get full access to this article

View all available purchase options and get full access to this article.

Acknowledgments

The research described was funded by the Natural Science Foundation of China (Grants 51578499 and 51761130078), and the National Key Basic Research Program of China (Grant 2015CB057801).

References

Andersen, K. H. 2015. Cyclic soil parameters for offshore foundation design. Vol. 1 of Frontiers in offshore geotechnics III, 5–82. Boca Raton, FL: CRC.
Atkinson, J. H. 2000. “Non-linear soil stiffness in routine design.” Géotechnique 50 (5): 487–508. https://doi.org/10.1680/geot.2000.50.5.487.
Ayoubian, A., and P. K. Robertson. 1998. “Void ratio redistribution in undrained triaxial extension tests on Ottawa sand.” Can. Geotech. J. 35 (2): 351–359. https://doi.org/10.1139/t98-006.
Been, K., and M. G. Jefferies. 1985. “A state parameter for sands.” Géotechnique 35 (2): 99–112. https://doi.org/10.1680/geot.1985.35.2.99.
Bouferra, R., N. Benseddiq, and I. Shahrour. 2007. “Saturation and preloading effects on the cyclic behavior of sand.” Int. J. Geomech. 7 (5): 396–401. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:5(396).
Boukpeti, N., Z. Mróz, and A. Drescher. 2002. “A model for static liquefaction in triaxial compression and extension.” Can. Geotech. J. 39 (6): 1243–1253. https://doi.org/10.1139/t02-066.
Cai, Y. Q., L. Guo, R. J. Jardine, Z. X. Yang, and J. Wang. 2017. “Stress-strain response of soft clay to traffic loading.” Géotechnique 67 (5): 446–451. https://doi.org/10.1680/jgeot.15.P.224.
Castro, G. 1969. “Liquefaction of sands.” Harvard Soil Mechanics Series 81. Cambridge, MA: Harvard University Press.
Chu, J., D. Wanatowski, W. L. Loke, and W. K. Leong. 2015. “Pre-failure instability of sand under dilatancy rate controlled conditions.” Soils Found. 55 (2): 414–424. https://doi.org/10.1016/j.sandf.2015.02.015.
Clayton, C. R. I. 2011. “Stiffness at small strain: Research and practice.” Géotechnique 61 (1): 5–37. https://doi.org/10.1680/geot.2011.61.1.5.
de Gennaro, V., J. Canou, J. C. Dupla, and N. Benahmed. 2004. “Influence of loading path on the undrained behaviour of a medium loose sand.” Can. Geotech. J. 41 (1): 166–180. https://doi.org/10.1139/t03-082.
Doanh, T., P. Dubujet, and X. Protière. 2013. “On the undrained strain-induced anisotropy of loose sand.” Acta Geotech. 8 (3): 293–309. https://doi.org/10.1007/s11440-012-0201-8.
Finge, Z., T. Doanh, and P. Dubujet. 2006. “Undrained anisotropy of Hostun RF loose sand: New experimental investigations.” Can. Geotech. J. 43 (11): 1195–1212. https://doi.org/10.1139/t06-068.
Fonseca, J., W. W. Sim, T. Shire, and C. O'Sullivan. 2014. “Microstructural analysis of sands with varying degrees of internal stability.” Géotechnique 64 (5): 405–411. https://doi.org/10.1680/geot.13.T.014.
Gajo, A., and L. Piffer. 1999. “The effects of preloading history on the undrained behaviour of saturated loose sand.” Soils Found. 39 (6): 43–53. https://doi.org/10.3208/sandf.39.6_43.
Graham, J., and G. T. Houlsby. 1983. “Anisotropic elasticity of a natural clay.” Géotechnique 33 (2): 165–180. https://doi.org/10.1680/geot.1983.33.2.165.
Guo, L., Y. Q. Cai, R. J. Jardine, Z. X. Yang, and J. Wang. 2018. “Undrained behaviour of intact soft clay under cyclic paths that match vehicle loading conditions.” Can. Geotech. J. 55 (1): 90–106. https://doi.org/10.1139/cgj-2016-0636.
Hoque, E., and F. Tatsuoka. 2004. “Effects of stress ratio on small-strain stiffness during triaxial shearing.” Géotechnique 54 (7): 429–439. https://doi.org/10.1680/geot.2004.54.7.429.
Hyodo, M., H. Tanimizu, N. Yasufuku, and H. Murata. 1994. “Undrained cyclic and monotonic triaxial behaviour of saturated loose sand.” Soils Found. 34 (1): 19–32. https://doi.org/10.3208/sandf1972.34.19.
Idriss, I. M., and R. W. Boulanger. 2008. Soil liquefaction during earthquakes. Oakland, CA: Earthquake Engineering Research Institute (EERI).
Ishibashi, I., and O. F. Capar. 2003. “Anisotropy and its relation to liquefaction resistance of granular material.” Soils Found. 43 (5): 149–159. https://doi.org/10.3208/sandf.43.5_149.
Ishihara, K. 1993. “Liquefaction and flow failure during earthquakes.” Géotechnique 43 (3): 351–451. https://doi.org/10.1680/geot.1993.43.3.351.
Ishihara, K., F. Tatsuoka, and S. Yasuda. 1975. “Undrained deformation and liquefaction of sand under cyclic stresses.” Soils Found. 15 (1): 29–44. https://doi.org/10.3208/sandf1972.15.29.
Jiang, G. L., F. Tatsuoka, A. Flora, and J. Koseki. 1997. “Inherent and stress state-induced anisotropy in very small strain stiffness of a sandy gravel.” Géotechnique 47 (3): 509–521. https://doi.org/10.1680/geot.1997.47.3.509.
Kato, S., K. Ishihara, and I. Towhata. 2001. “Undrained shear characteristics of saturated sand under anisotropic consolidation.” Soils Found. 41 (1): 1–11. https://doi.org/10.3208/sandf.41.1.
Kramer, S. L. 1996. Geotechnical earthquake engineering. London: Pearson.
Lade, P. V. 1992. “Static instability and liquefaction of loose fine sandy slopes.” J. Geotech. Eng. 118 (1): 51–71. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:1(51).
Lambe, T. W., and R. V. Whitman. 1969. Soil mechanics. New York: Wiley.
Li, X. S., and Y. F. Dafalias. 2012. “Anisotropic critical state theory: Role of fabric.” J. Eng. Mech. 138 (3): 263–275. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000324.
Mcmanus, K. J., and R. O. Davis. 1997. “Dilation-induced pore fluid cavitation in sands.” Géotechnique 47 (1): 173–177. https://doi.org/10.1680/geot.1997.47.1.173.
McVay, M., R. Casper, and T.-I. Shang. 1995. “Lateral response of three-row groups in loose to dense sands at 3d and 5d pile spacing.” J. Geotech. Eng. 121 (5): 436–441. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:5(436).
Mohamad, R., and R. Dobry. 1986. “Undrained monotonic and cyclic triaxial strength of sand.” J. Geotech. Eng. 112 (10): 941–958. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:10(941).
Oda, M. 1972. “Initial fabrics and their relations to mechanical properties of granular material.” Soils Found. 12 (1): 17–36. https://doi.org/10.3208/sandf1960.12.17.
Oda, M., K. Kawamoto, K. Suzuki, H. Fujimori, and M. Sato. 2001. “Microstructural interpretation on reliquefaction of saturated granular soils under cyclic loading.” J. Geotech. Geoenviron. Eng. 127 (5): 416–423. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:5(416).
Oda, M., and H. Nakayama. 1988. “Introduction of inherent anisotropy of soils in the yield function.” In Micromechanics of granular materials, edited by Masao Satake and James T. Jenkin, 81–90. Amsterdam, Netherlands: Elsevier.
Pan, K., and Z. X. Yang. 2017. “Evaluation of liquefaction potential of sand under random loading conditions: Equivalent approach versus energy-based method.” J. Earthquake. Eng. https://doi.org/10.1080/13632469.2017.1398693.
Pan, K., and Z. X. Yang. 2018. “Effects of initial static shear on cyclic resistance and pore pressure generation of saturated sand.” Acta Geotech. 13 (2): 473–487.
Rahman, M., M. A. L. Baki, and S. R. Lo. 2014. “Prediction of undrained monotonic and cyclic liquefaction behavior of sand with fines based on the equivalent granular state parameter.” Int. J. Geomech. 14 (2): 254–266. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000316.
Randolph, M. F. 2012. “Offshore design approaches and model tests for sub-failure cyclic loading of foundations.” In Mechanical behaviour of soils under environmentally induced cyclic loads, 441–480. New York: Springer.
Riemer, M. F., and R. B. Seed. 1997. “Factors affecting apparent position of steady-state line.” J. Geotech. Geoenviron. Eng. 123 (3): 281–288. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:3(281).
Sivathayalan, S., and D. Ha. 2011. “Effect of static shear stress on the cyclic resistance of sands in simple shear loading.” Can. Geotech. J. 48 (10): 1471–1484. https://doi.org/10.1139/t11-056.
Skempton, A. W. 1986. “Standard penetration test procedures and the effects in sands of overburden pressure, relative density, particle size, ageing and overconsolidation.” Géotechnique 36 (3): 425–447. https://doi.org/10.1680/geot.1986.36.3.425.
Sladen, J. A., R. D. D’Hollander, and J. Krahn. 1985. “The liquefaction of sands, a collapse surface approach.” Can. Geotech. J. 22 (4): 564–578. https://doi.org/10.1139/t85-076.
Sze, H. Y., and J. Yang. 2014. “Failure modes of sand in undrained cyclic loading: Impact of sample preparation.” J. Geotech. Geoenviron. Eng. 140 (1): 152–169. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000971.
Vaid, Y. P., and J. C. Chern. 1983. “Effect of static shear on resistance to liquefaction.” Soils Found. 23 (1): 47–60. https://doi.org/10.3208/sandf1972.23.47.
Verdugo, R., and K. Ishihara. 1996. “The steady state of sandy soils.” Soils Found. 36 (2): 81–91. https://doi.org/10.3208/sandf.36.2_81.
Yamashita, S., M. Jamiolkowski, and D. C. F. L. Presti. 2000. “Stiffness nonlinearity of three sands.” J. Geotech. Geoenviron. Eng. 126 (10): 929–938. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:10(929).
Yan, W. M., and L. Zhang. 2013. “Fabric and the critical state of idealized granular assemblages subject to biaxial shear.” Comput. Geotech. 49: 43–52. https://doi.org/10.1016/j.compgeo.2012.10.015.
Yang, J. 2002. “Non-uniqueness of flow liquefaction line for loose sand.” Géotechnique 52 (10): 757–760. https://doi.org/10.1680/geot.2002.52.10.757.
Yang, Z., and A. Elgamal. 2002. “Influence of permeability on liquefaction-induced shear deformation.” J. Eng. Mech. 128 (7): 720–729. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:7(720).
Yang, Z. X., X. S. Li, and J. Yang. 2008. “Quantifying and modelling fabric anisotropy of granular soils.” Géotechnique 58 (4): 237–248. https://doi.org/10.1680/geot.2008.58.4.237.
Yang, Z. X., and K. Pan. 2017. “Flow deformation and cyclic resistance of saturated loose sand considering initial static shear effect.” Soil Dyn. Earthquake Eng. 92: 68–78. https://doi.org/10.1016/j.soildyn.2016.09.002.
Yang, Z. X., and Y. Wu. 2017. “Critical state for anisotropic granular materials: A discrete element perspective.” Int. J. Geomech. 17 (2): 04016054. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000720.
Ye, B., J. Lu, and G. L. Ye. 2015. “Pre-shear effect on liquefaction resistance of a Fujian sand.” Soil Dyn. Earthquake Eng. 77: 15–23. https://doi.org/10.1016/j.soildyn.2015.04.018.
Ye, G. L., B. Ye, and F. Zhang. 2014. “Strength and dilatancy of overconsolidated clays in drained true triaxial tests.” J. Geotech. Geoenviron. Eng. 140 (4): 06013006. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001060.
Yimsiri, S., and K. Soga. 2010. “DEM analysis of soil fabric effects on behaviour of sand.” Géotechnique 60 (6): 483–495. https://doi.org/10.1680/geot.2010.60.6.483.
Yoshimine, M., and Y. Hosono. 2000. “Effect of anisotropy of sand on results of undrained triaxial test.” Mem. Graduate Sch. Eng. Tokyo Metropolitan Univ. 50: 158–169.
Yoshimine, M., and K. Ishihara. 1998. “Flow potential of sand during liquefaction.” Soils Found. 38 (3): 189–198. https://doi.org/10.3208/sandf.38.3_189.

Information & Authors

Information

Published In

Go to International Journal of Geomechanics
International Journal of Geomechanics
Volume 18Issue 12December 2018

History

Received: Jan 15, 2018
Accepted: Jun 11, 2018
Published online: Sep 21, 2018
Published in print: Dec 1, 2018
Discussion open until: Feb 21, 2019

Permissions

Request permissions for this article.

Authors

Affiliations

Postdoctoral Fellow, College of Civil Engineering and Architecture, Zhejiang Univ. of Technology, Hangzhou, Zhejiang 310014, China; formerly, Postgraduate Student, Dept. of Civil Engineering, Zhejiang Univ., Hangzhou, Zhejiang 310058, China. Email: [email protected]
Z. X. Yang, M.ASCE [email protected]
Professor, Research Center of Coastal and Urban Geotechnical Engineering, Dept. of Civil Engineering, Zhejiang Univ., Hangzhou, Zhejiang 310058, China (corresponding author). Email: [email protected]
Postgraduate Student, Dept. of Civil Engineering, Zhejiang Univ., Hangzhou, Zhejiang 310058, China. Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share