Discrete Kinematic Mechanism for Nonhomogeneous Slopes and Its Application
Publication: International Journal of Geomechanics
Volume 18, Issue 12
Abstract
In the framework of limit analysis, most previous studies of nonhomogeneous slopes have only involved the spatial variation of cohesion, whereas cases involving the spatially varying friction angle have rarely been studied. The main aim of the study presented in this paper was to propose an effective approach for analyzing slopes with friction angle spatial variability. According to the upper-bound theorem of limit analysis, a new two-dimensional (2D) failure mechanism using a spatial discretization technique was studied. With this mechanism, the slip surface was composed of a series of straight lines, instead of the continuous curve used in conventional limit analysis. The mechanism-generation procedure for the slip surface is described herein, and the mathematical formulations for the weight work rate and energy dissipation are also presented. After a discussion about accuracy and efficiency, the validation of the proposed approach, conducted previous achievements and numerical simulations, is presented. The good agreement shows that the proposed mechanism is effective. Finally, the analysis of the stability of nonhomogeneous slopes, with friction angles varying linearly with depth, and the investigation into the effects of the slope angles and friction angle distributions are presented.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
In the preparation of this paper, financial support was received from the National Natural Science Foundation (Grant 51408180). This financial support is greatly appreciated.
References
Al-Karni, A. A., and M. A. Al-Shamrani. 2000. “Study of the effect of soil anisotropy on slope stability using method of slices.” Comput. Geotech. 26 (2): 83–103. https://doi.org/10.1016/S0266-352X(99)00046-4.
Chen, J., J.-H. Yin, and C. F. Lee. 2003. “Upper bound limit analysis of slope stability using rigid finite elements and nonlinear programming.” Can. Geotech. J. 40 (4): 742–752. https://doi.org/10.1139/t03-032.
Chen, W.-F. 1975. Limit analysis and soil plasticity. Amsterdam, Netherlands: Elsevier.
Chen, W. F., and T. Sawada. 1983. “Earthquake-induced slope failure in nonhomogeneous, anisotropic soils.” Soils Found. 23 (2): 125–139. https://doi.org/10.3208/sandf1972.23.2_125.
Cheng, Y. M., T. Lansivaara, and W. B. Wei. 2007. “Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods.” Comput. Geotech. 34 (3): 137–150. https://doi.org/10.1016/j.compgeo.2006.10.011.
Cherubini, C. 2000. “Reliability evaluation of shallow foundation bearing capacity on c ‘ϕ’ soils.” Can. Geotech. J. 37 (1): 264–269. https://doi.org/10.1139/t99-096.
Ching, J., and K.-K. Phoon. 2013. “Mobilized shear strength of spatially variable soils under simple stress states.” Struct. Saf. 41 (Mar): 20–28. https://doi.org/10.1016/j.strusafe.2012.10.001.
Donald, I. B., and Z. Chen. 1997. “Slope stability analysis by the upper bound approach: Fundamentals and methods.” Can. Geotech. J. 34 (6): 853–862. https://doi.org/10.1139/t97-061.
Forrest, W. S., and T. L. L. Orr. 2010. “Reliability of shallow foundations designed to Eurocode 7.” Georisk Assess. Manage. Risk Eng. Syst. Geohazards 4 (4): 186–207. https://doi.org/10.1080/17499511003646484.
Harr, M. E. 1987. Reliability-based design in civil engineering. New York: McGraw-Hill.
Itasca Consulting Group. 2000. FLAC fast Lagrangian analysis of continua, version 4.0. Minneapolis: Itasca Consulting Group.
Kumar, J., and D. Chakraborty. 2013. “Linearization of Drucker-Prager yield criterion for axisymmetric problems: Implementation in lower-bound limit analysis.” Int. J. Geomech. 13 (2): 153–161. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000200.
Kumar, J., and P. Samui. 2006. “Stability determination for layered soil slopes using the upper bound limit analysis.” Geotech. Geol. Eng. 24 (6): 1803. https://doi.org/10.1007/s10706-006-7172-1.
Li, D.-Q., X.-H. Qi, Z.-J. Cao, X.-S. Tang, W. Zhou, K.-K. Phoon, and C.-B. Zhou. 2015. “Reliability analysis of strip footing considering spatially variable undrained shear strength that linearly increases with depth.” Soils Found. 55 (4): 866–880.
Li, D.-Q., X.-H. Qi, K.-K. Phoon, L.-M. Zhang, and C.-B. Zhou. 2014. “Effect of spatially variable shear strength parameters with linearly increasing mean trend on reliability of infinite slopes.” Struct. Saf. 49 (Jul): 45–55.
Lumb, P. 1970. “Safety factors and the probability distribution of soil strength.” Can. Geotech. J. 7 (3): 225–242. https://doi.org/10.1139/t70-032.
Ma, H.-p., Z.-y. Chen, and S. Yu. 2014. “Correlations of soil shear strength with specific penetration resistance of CPT in Shanghai area.” Rock Soil Mech. 35 (2): 536–542.
Michalowski, R. L. 1995. “Slope stability analysis: A kinematical approach.” Géotechnique 45 (2): 283–293. https://doi.org/10.1680/geot.1995.45.2.283.
Michalowski, R. L., and A. Drescher. 2009. “Three-dimensional stability of slopes and excavations.” Géotechnique 59 (10): 839–850. https://doi.org/10.1680/geot.8.P.136.
Mollon, G., K. K. Phoon, D. Dias, and A.-H. Soubra. 2011. “Validation of a new 2D failure mechanism for the stability analysis of a pressurized tunnel face in a spatially varying sand.” J. Eng. Mech. 137 (1): 8–21. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000196.
Nian, T. K., G. Q. Chen, M. T. Luan, Q. Yang, and D. F. Zheng. 2008. “Limit analysis of the stability of slopes reinforced with piles against landslide in nonhomogeneous and anisotropic soils.” Can. Geotech. J. 45 (8): 1092–1103. https://doi.org/10.1139/T08-042.
Pan, Q., and D. Dias. 2018. “Three dimensional face stability of a rock tunnel in weak rock masses subjected to seepage forces.” Tunnelling Underground Space Technol. 71 (Jan): 555–566. https://doi.org/10.1016/j.tust.2017.11.003.
Tan, D., and S. K. Sarma. 2008. “Finite element verification of an enhanced limit equilibrium method for slope analysis.” Géotechnique 58 (6): 481–487. https://doi.org/10.1680/geot.2008.58.6.481.
Wu, X. Z. 2013. “Trivariate analysis of soil ranking-correlated characteristics and its application to probabilistic stability assessments in geotechnical engineering problems.” Soils Found. 53 (4): 540–556. https://doi.org/10.1016/j.sandf.2013.06.006.
Xu, J.-S., and X.-L. Yang. 2018a. “Seismic and static stability analysis for 3D reinforced slope in nonhomogeneous and anisotropic soils.” Int. J. Geomech. 18 (7): 04018065. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001177.
Xu, J.-S., and X.-L. Yang. 2018b. “Three-dimensional stability analysis of slope in unsaturated soils considering strength nonlinearity under water drawdown.” Eng. Geol. 237: 102–115. https://doi.org/10.1016/j.enggeo.2018.02.010.
Yang, X. L., and Z. W. Li. 2018. “Factor of safety of three-dimensional stepped slopes.” Int. J. Geomech. 18 (6): 04018036. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001154.
Zhang, R., and X. Yang. 2018. “Limit analysis of active and passive mechanisms of shallow tunnels in nonassociative soil with changing water table.” Int. J. Geomech. 18 (7): 04018063. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001167.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Sep 8, 2017
Accepted: May 29, 2018
Published online: Oct 3, 2018
Published in print: Dec 1, 2018
Discussion open until: Mar 3, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.