Finite Element Limit Analysis of the Bearing Capacity of Strip Footing on a Rock Mass with Voids
Publication: International Journal of Geomechanics
Volume 18, Issue 9
Abstract
Finite element limit analysis (FELA) was used to investigate the bearing capacity of strip footing on a rock mass with single or multiple continuous voids. The underlying rock mass was assumed to have perfect plasticity and obey the modified Hoek–Brown criterion. A sensitivity study relevant to the material constants, such as intact rock strength, unit weight, and geological strength index, was also conducted; in addition, some other geometric parameters, including the location, size, width, height, and quantity of voids, were addressed. The results include presentations of a series of design charts and descriptions of the failure mechanisms.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was part of the work carried out with support of grants from the National Natural Science Foundation of China (51478178 and 51608540).
References
Abbo, A. J., D. W. Wilson, S. W. Sloan, and A. V. Lyamin. 2013. “Undrained stability of wide rectangular tunnels.” Comput. Geotech. 53 (Sep): 46–59. https://doi.org/10.1016/j.compgeo.2013.04.005.
Al-Tabbaa, A., L. Russell, and M. O'Reilly. 1989. “Model tests of footings above shallow cavities.” Ground Eng. 22 (7): 39–42.
Azam, G., M. Jao, and M. C. Wang. 1997. “Cavity effect on stability of strip footing in two-layer soils.” Geotech. Eng. 28 (2): 151–164.
Badie, A., and M. C. Wang. 1984. “Stability of spread footing above void in clay.” J. Geotech. Eng. 110 (11): 1591–1605. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:11(1591).
Baus, R. L., and M. C. Wang. 1983. “Bearing capacity of strip footing above void.” J. Geotech. Eng. 109 (1): 1–14. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:1(1).
Hjiaj, M., A. V. Lyamin, and S. W. Sloan. 2005. “Numerical limit analysis solutions for the bearing capacity factor Nγ.” Int. J. Solids Struct. 42 (Mar): 1681–1704. https://doi.org/10.1016/j.ijsolstr.2004.08.002.
Hoek, E., and E. T. Brown. 1997. “Practical estimates of rock mass strength.” Int. J. Rock Mech. Min. Sci. 34 (8): 1165–1186. https://doi.org/10.1016/S1365-1609(97)80069-X.
Hoek, E., and P. Marinos. 2007. “A brief history of the development of the Hoek–Brown failure criterion.” Soils Rocks 30 (2): 85–92.
Huang, F., L. Zhao, T. Ling, and X. Yang. 2017. “Rock mass collapse mechanism of concealed karst cave beneath deep tunnel.” Int. J. Rock Mech. Min. Sci. 91 (Jan): 133–138. https://doi.org/10.1016/j.ijrmms.2016.11.017.
Javid, A. H., A. Fahimifar, and M. Imani. 2015. “Numerical investigation on the bearing capacity of two interfering strip footings resting on a rock mass.” Comput. Geotech. 69 (Sep): 514–528. https://doi.org/10.1016/j.compgeo.2015.06.005.
Kiyosumi, M., O. Kusakabe, and M. Ohuchi. 2011. “Model tests and analyses of bearing capacity of strip footing on stiff ground with voids.” J. Geotech. Geoenviron. Eng. 137 (4): 363–375. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000440.
Kiyosumi, M., O. Kusakabe, M. Ohuchi, and F. Le Peng. 2007. “Yielding pressure of spread footing above multiple voids.” J. Geotech. Geoenviron. Eng. 133 (12): 1522–1531. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:12(1522).
Krabbenhoft, K., A. V. Lyamin, M. Hjiaj, and S. W. Sloan. 2005. “A new discontinuous upper bound limit analysis formulation.” Int. J. Numer. Methods Eng. 63 (7): 1069–1088. https://doi.org/10.1002/nme.1314.
Lavasan, A. A., A. Talsaz, M. Ghazavi, and T. Schanz. 2016. “Behavior of shallow strip footing on twin voids.” Geotech. Geol. Eng. 34 (6): 1791–1805. https://doi.org/10.1007/s10706-016-9989-6.
Lee, J. K., S. Jeong, and J. Ko. 2014. “Undrained stability of surface strip footings above voids.” Comput. Geotech. 62 (Oct): 128–135. https://doi.org/10.1016/j.compgeo.2014.07.009.
Lee, J. K., S. Jeong, and J. Ko. 2015. “Effect of load inclination on the undrained bearing capacity of surface spread footings above voids.” Comput. Geotech. 66 (May): 245–252. https://doi.org/10.1016/j.compgeo.2015.02.003.
Lim, K., A. J. Li, A. Schmid, and A. V. Lyamin. 2017. “Slope-stability assessments using finite-element limit-analysis methods.” Int. J. Geomech. 17 (2): 06016017. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000715.
Lyamin, A. V., and S. W. Sloan. 2002a. “Lower bound limit analysis using non-linear programming.” Int. J. Numer. Methods Eng. 55 (5): 573–611. https://doi.org/10.1002/nme.511.
Lyamin, A. V., and S. W. Sloan. 2002b. “Upper bound limit analysis using linear finite elements and non-linear programming.” Int. J. Numer. Methods Geomech. 26 (2): 181–216. https://doi.org/10.1002/nag.198.
Marinos, V., P. Marinos, and E. Hoek. 2005. “The geological strength index: Applications and limitations.” Bull. Eng. Geol. Environ. 64 (1): 55–65. https://doi.org/10.1007/s10064-004-0270-5.
Merifield, R. S., A. V. Lyamin, and S. W. Sloan. 2006. “Limit analysis solutions for the bearing capacity of rock masses using the generalised Hoek–Brown criterion.” Int. J. Rock Mech. Min. Sci. 43 (6): 920–937. https://doi.org/10.1016/j.ijrmms.2006.02.001.
Merifield, R. S., S. W. Sloan, and H. S. Yu. 1999. “Rigorous plasticity solutions for the bearing capacity of two-layered clays.” Géotechnique 49 (4): 471–490. https://doi.org/10.1680/geot.1999.49.4.471.
Optum Computational Engineering. 2014. OptumG2 Geotechnical Analysis Software, v. 2. Conpenhagen, Denmark: OPTUMCE.
Qian, Z. G., A. J. Li, A. V. Lyamin, and C. C. Wang. 2017. “Parametric studies of disturbed rock slope stability based on finite element limit analysis methods.” Comput. Geotech. 81 (Jan): 155–166. https://doi.org/10.1016/j.compgeo.2016.08.012.
Qian, Z. G., A. J. Li, R. S. Merifield, and A. V. Lyamin. 2015. “Slope stability charts for two-layered purely cohesive soils based on finite-element limit analysis methods.” Int. J. Geomech. 15 (3): 06014022. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000438.
Saada, Z., S. Maghous, and D. Garnier. 2008. “Bearing capacity of shallow foundations on rocks obeying a modified Hoek–Brown failure criterion.” Comput. Geotech. 35 (2): 144–154. https://doi.org/10.1016/j.compgeo.2007.06.003.
Shiau, J. S., A. V. Lyamin, and S. W. Sloan. 2003. “Bearing capacity of a sand layer on clay by finite element limit analysis.” Can. Geotech. J. 40 (5): 900–915. https://doi.org/10.1139/t03-042.
Sloan, S. W. 2013. “Geotechnical stability analysis.” Géotechnique 63 (7): 531–571. https://doi.org/10.1680/geot.12.RL.001.
Wang, M. C., and A. Badie. 1985. “Effect of underground void on foundation stability.” J. Geotech. Eng. 111 (8): 1008–1019. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:8(1008).
Wang, M. C., and C. W. Hsieh. 1987. “Collapse load of strip footing above circular void.” J. Geotech. Eng. 113 (5): 511–515. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:5(511).
Wang, M. C., Y.-U. Kim, and J.-T. Jun. 2001. “Cavity effect on collapse load of strip footings.” In Vol. 1 of Proc., 15th Int. Conf. Soil Mechanics and Geotechnical Engineering, 317–320. Lisse, Netherlands: A. A. Balkema.
Wilson, D. W., A. J. Abbo, S. W. Sloan, and A. V. Lyamin. 2013. “Undrained stability of a square tunnel where the shear strength increases linearly with depth.” Comput. Geotech. 49 (Apr): 314–325. https://doi.org/10.1016/j.compgeo.2012.09.005.
Wilson, D. W., A. J. Abbo, S. W. Sloan, and A. V. Lyamin. 2015. “Undrained stability of dual square tunnels.” Acta Geotech. 10 (5): 665–682. https://doi.org/10.1007/s11440-014-0340-1.
Wilson, D. W., A. J. Abbo, S. W. Sloan, and K. Yamamoto. 2017. “Undrained stability of rectangular tunnels where shear strength increases linearly with depth.” Can. Geotech. J. 54 (4): 469–480. https://doi.org/10.1139/cgj-2016-0072.
Wong, L. N. Y., and Z. Wu. 2014. “Application of the numerical manifold method to model progressive failure in rock slopes.” Eng. Fract. Mech. 119 (Mar): 1–20. https://doi.org/10.1016/j.engfracmech.2014.02.022.
Wu, Z., and L. N. Y. Wong. 2015. “Modeling the progressive failure in rock slopes based on the fracture mechanics approach using the numerical manifold method.” In Proc., 13th ISRM Int. Congress of Rock Mechanics; Innovations in Applied and Theoretical Rock Mechanics. Lisbon, Portugal: International Society for Rock Mechanics.
Yamamoto, K., A. V. Lyamin, D. W. Wilson, S. W. Sloan, and A. J. Abbo. 2014. “Stability of dual square tunnels in cohesive-frictional soil subjected to surcharge loading.” Can. Geotech. J. 51 (8): 829–843. https://doi.org/10.1139/cgj-2013-0481.
Yang, X.-L., and J.-H. Yin. 2005. “Upper bound solution for ultimate bearing capacity with a modified Hoek–Brown failure criterion.” Int. J. Rock Mech. Min. Sci. 42 (4): 550–560. https://doi.org/10.1016/j.ijrmms.2005.03.002.
Zhao, C., A. A. Lavasan, T. Barciaga, V. Zarev, M. Datcheva, and T. Schanz. 2015. “Model validation and calibration via back analysis for mechanized tunnel simulations—The Western Scheldt tunnel case.” Comput. Geotech. 69 (Sep): 601–614. https://doi.org/10.1016/j.compgeo.2015.07.003.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Aug 3, 2017
Accepted: Apr 13, 2018
Published online: Jul 10, 2018
Published in print: Sep 1, 2018
Discussion open until: Dec 10, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.