Effects of Cement Treatment on Microstructural, Hydraulic, and Mechanical Properties of Compacted Soils: Characterization and Modeling
Publication: International Journal of Geomechanics
Volume 18, Issue 9
Abstract
This paper addresses the problem of the experimental characterization of cement-treated compacted soils in terms of microstructural, hydraulic, and mechanical properties. Tests were conducted on two different types of soil: silty sand and clay as fine soils, and gravelous sand and alterite as granular soils. Samples were mixed with 5% cement and compacted at different levels (i.e., 85, 95, 100, and 105% of the maximum dry density, respectively, as achieved using the standard compaction method). The results of the mercury intrusion porosimetry (MIP) tests performed on these cement-treated soils revealed significant changes regarding macropores. A reduction in both size and volume due to the combined effects of treatment and compaction was observed in fine soils, and an even higher reduction was seen in granular soils. Because the permeability was mainly governed by the macropores, a decrease in the permeability was clearly observed for all tested soils when the degree of compaction increased. This decrease was significantly greater in fine soils, which were more sensitive to compaction effects than granular soils. Unconfined compressive strength (UCS) results showed that the addition of cement improved UCS values due to an increase in cohesion. The cohesion increase was generated by the cement bonding and enhanced by the compaction effect. Based on a recently developed approach, a prediction model for the permeability of cement-treated compacted soils was proposed. Microstructural and compaction characteristics were taken into account. This original predictive model considered the treatment effects on both the pore interconnection and the morphological parameters of the pore structure (i.e., constrictivity and tortuosity).
Get full access to this article
View all available purchase options and get full access to this article.
References
AFNOR (Association Française de Normalisation). 2003. Unbound and hydraulically bound mixtures—Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures. NF EN 13286–41. France: AFNOR.
AFNOR (Association Française de Normalisation). 2005. Geotechnical investigation and testing—Laboratory testing of soil—Part 7: Unconfined compression test on fine-grained soils—Reconnaissance et essais géotechniques. XP CEN ISO/TS 17892–7. France: AFNOR.
AFNOR (Association Française de Normalisation). 2012. Cement—Part 1: Composition, specifications and conformity criteria for common cements. France: AFNOR.
Aït-Mokhtar, A., O. Amiri, and S. Sammartino. 1999. “Analytic modelling and experimental study of the porosity and permeability of a porous medium-application to cement mortars and granitic rock.” Mag. Concr. Res. 51 (6): 391–396. https://doi.org/10.1680/macr.1999.51.6.391.
Al-Rawas, A. A., and M. F. A. Goosen. 2006. Expansive soils: Recent advances in characterization and treatment. London: Taylor and Francis Group.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ft-lbf/ft3 (600 kN-m/m3)). ASTM D698. West Conshohocken, PA: ASTM.
Bell, F. G. 1996. “Lime stabilization of clay minerals and soils.” Eng. Geol. 42 (4): 223–237. https://doi.org/10.1016/0013-7952(96)00028-2.
Beven, K., and P. Germann. 1982. “Macropores and water flow in soils.” Water Resour. Res. 18 (5): 1311–1325. https://doi.org/10.1029/WR018i005p01311.
Bin, S., L. Zhibin, C. Yi, and Z. Xiaoping. 2007. “Micropore structure of aggregates in treated soils.” J. Mater. Civ. Eng. 19 (1): 99–104. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:1(99).
Boardman, D. I., S. Glendinning, and C. D. F. Rogers. 2001. “Development of stabilisation and solidification in lime-clay mixes.” Géotechnique 51 (6): 533–543. https://doi.org/10.1680/geot.2001.51.6.533.
Casini, F., J. Vaunat, E. Romero, and A. Desideri. 2012. “Consequences on water retention properties of double-porosity features in a compacted silt.” Acta Geotech. 7 (2): 139–150. https://doi.org/10.1007/s11440-012-0159-6.
Choobbasti, A. J., and S. S. Kutanaei. 2017. “Microstructure characteristics of cement-stabilized sandy soil using nanosilica.” J. Rock Mech. Geotech. Eng. 9 (5): 981–988. https://doi.org/10.1016/j.jrmge.2017.03.015.
Cook, R. A., and K. C. Hover. 1999. “Mercury porosimetry of hardened cement pastes.” Cem. Concr. Res. 29 (6): 933–943. https://doi.org/10.1016/S0008-8846(99)00083-6.
Gagneux, G., and O. Millet. 2014. “Analytic calculation of capillary bridge properties deduced as an inverse problem from experimental.” Transp. Porous Media 105 (1): 117–139. https://doi.org/10.1007/s11242-014-0363-y.
Gagneux, G., and O. Millet. 2016. “An analytical framework for evaluating the cohesion effects of coalescence between capillary bridges.” Granular Matter 18: 16. https://doi.org/10.1007/s10035-016-0613-5.
Gagneux, G., O. Millet, B. Mielniczuk, and M. S. El-Youssoufi. 2017. “Theoretical and experimental study of pendular regime in unsaturated granular media.” Eur. J. Environ. Civ. Eng. 21 (7–8): 840–853. https://doi.org/10.1080/19648189.2016.1167782.
Gallé, C. 2001. “Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying.” Cem. Concr. Res. 31 (10): 1467–1477. https://doi.org/10.1016/S0008-8846(01)00594-4.
Khattab, S. A. A., M. Al-Mukhtar, and J. M. Fleureau. 2007. “Long-term characteristics of a lime treated plastic soil.” J. Mater. Civ. Eng. 19 (4): 358–366. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(358).
Lemaire, K., D. Deneele, S. Bonnet, and M. Legret. 2013. “Effects of lime and cement treatment on the physicochemical, microstructural and mechanical characteristics of a plastic silt.” Eng. Geol. 166, 255–261. https://doi.org/10.1016/j.enggeo.2013.09.012.
Le Runigo, B., V. Ferber, Y.-J. Cui, and D. Deneele. 2011. “Performance of lime-treated silty soil under long-term hydraulic conditions.” Eng. Geol. 118 (1–2): 20–28. https://doi.org/10.1016/j.enggeo.2010.12.002.
Little, D. N. 1995. Handbook for stabilization of pavement subgrades and base courses with lime. Arlington, VA: National Lime Association.
Locat, J., M.-A. Bérubé, and M. Choquette. 1990. “Laboratory investigation on the lime stabilization of sensitive clays: Shear strength development.” Can. Geotech. J. 27 (3): 294–304. https://doi.org/10.1139/t90-040.
Mengue, E., H. Mroueh, L. Lancelot, and R. M. Eko. 2017. “Mechanical improvement of a fine-grained lateritic soil treated with cement for use in road construction.” J. Mater. Civ. Eng. 29 (11): 04017206. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002059.
Muhunthan, B., and F. Sariosseiri. 2008. Interpretation of geotechnical properties of cement treated soils. Research report. Olympia, WA: WSDOT Research and Library Services.
Pomakhina, E., D. Deneele, A.-C. Gaillot, M. Paris, and G. Ouvrard. 2012. “29 SI solid state NMR investigation of pozzolanic reaction occurring in lime-treated Ca-bentonite.” Cem. Concr. Res. 42 (4): 626–632. https://doi.org/10.1016/j.cemconres.2012.01.008.
Ranaivomanana, H., A. Razakamanantsoa, and A. Amiri. 2017. “Permeability prediction of soils including degree of compaction and microstructure.” Int. J. Geomech. 17 (4): 04016107. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000792.
Ranaivomanana, H., J. Verdier, A. Sellier, and X. Bourbon. 2013. “Prediction of relative permeabilities and water vapor diffusion reduction factor for cement-based materials.” Cem. Concr. Res. 48: 53–63. https://doi.org/10.1016/j.cemconres.2013.02.008.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jul 13, 2017
Accepted: Apr 10, 2018
Published online: Jun 27, 2018
Published in print: Sep 1, 2018
Discussion open until: Nov 27, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.