Undrained Shear Strength and In Situ Horizontal Effective Stress from Piezocone Penetration Test Measurements in Clayey Soils: New Approach
Publication: International Journal of Geomechanics
Volume 18, Issue 9
Abstract
In this study, first the numerical modeling of the piezocone penetration test (CPTu) is performed. Then the obtained results are used to achieve a reliable solution for determining the undrained shear strength and in situ horizontal effective stress in cohesive soils according to the piezocone measurements. The presented solution results in three main relationships that must be used in a trial-and-error process to obtain the previously mentioned parameters. The proposed equations are then compared with the laboratory piezocone tests and well-known published field measurements. The comparisons indicate an acceptable degree of accuracy for predicting the undrained shear strength and in situ horizontal effective stress from the cone tip resistance and induced pore-water pressure at the cone shoulder, which are measured during a piezocone test.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aas, G., S. Lacasse, T. Lunne, and K. Høeg. 1986. “Use of in situ tests for foundation design on clay.” In Proc., ASCE Specialty Conf. In-situ ’86: Use of In-situ Tests in Geotechnical Engineering, 1–30. Reston VA: ASCE.
Abu-Farsakh, M., M. Tumay, and G. Voyiadjis. 2003. “Numerical parametric study of piezocone penetration test in clays.” Int. J. Geomech. 3 (2): 170–181. https://doi.org/10.1061/(ASCE)1532-3641(2003)3:2(170).
Ahmadi, M. M., and A. A. Golestani Dariani. 2017. “Cone penetration test in sand: A numerical-analytical approach.” Comput. Geotech. 90 (Oct): 176–189. https://doi.org/10.1016/j.compgeo.2017.06.010.
Almeida, M., M. Marques, and M. Baroni. 2010. “Geotechnical parameters of very soft clays from CPTu.” In Proc., 2nd Int. Symp. on Cone Penetration Testing, CPT’10, 1–8. Sussex, UK: In Situ Site Investigation.
Baligh, M. M. 1975. Theory of deep site static cone penetration resistance. Research Rep. R75-56, 141. Cambridge, MA: Dept. of Civil Engineering, Massachusetts Institute of Technology.
Budhu, M. 2010. Soil mechanics and foundations. 3rd ed. Hoboken, NJ: John Wiley & Sons.
Chang, M. F., C. I. Teh, and L. Cao. 1999. “Critical state strength parameters of saturated clays from the modified Cam clay model.” Can. Geotech. J. 36 (5): 876–890. https://doi.org/10.1139/t99-050.
Das, B. M. 2011. Principles of foundation engineering. SI edition. 7th ed. Stamford, CT: Cengage Learning.
Dassault Systèmes. 2011. Abaqus version 6.11 documentation. Waltham, MA: Dassault Systems Simulia Corporation.
Gebreselassie, B. 2003. “Experimental, analytical and numerical investigations of excavations in normally consolidated soft soils.” Ph.D. thesis, Univ. of Kassel.
Golestani Dariani, A. A., and M. M. Ahmadi. Forthcoming. “Numerical-analytical study of CPT in clay: A new approach for determination of the undrained shear strength.” Int. J. Num. Anal. Methods Geomech.
Hong, S., M. Lee, J. Kim, and W. Lee. 2010. “Evaluation of undrained shear strength of Busan clay using CPT.” In Proc., 2nd Int. on Cone Penetration Testing, CPT’10, 1–8. Sussex, UK: In Situ Site Investigation.
Karlsrud, K., T. Lunne, and K. Brattlieu. 1996. “Improved CPTu correlations based on block samples. Nordisk Geoteknikermote.” Reykjavik, 1: 195–201.
Karlsrud, K., T. Lunne, D. A. Kort, and S. Strandvik. 2005. “CPTU correlations for clays.” In Proc., 16th Int. Conf. on Soil Mechanics and Geotechnical Engineering (ICSMGE), 693–702. Clifton, VA: IOS Press.
Kurup, P., G. Voyiadjis, and M. Tumay. 1994. “Calibration chamber studies of piezocone test in cohesive soils.” J. Geotech. Engrg. 120 (1): 81–107. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:1(81).
La Rochelle, P., P. M. Zebdi, S. Leroueil, F. Tavenas, and D. Virely. 1988. “Piezocone tests in sensitive clays of eastern Canada.” In Vol. 2 of Proc., Int. Symp. on Penetration Testing, ISOPT-1, 831–841. Rotterdam, Netherlands: AA Balkema.
Ladd, C. C., R. Foothe, K. Ishihara, F. Schlosser, and H. G. Poulos. 1977. “Stress-deformation and strength characteristics, state-of-the-art report.” In Proc., 9th Int. Conf. on Soil Mechanics and Foundation Engineering, 421–494. Tokyo: Japanese Society of Soil Mechanics and Foundation Engineering.
Low, H. E., T. Lunne, K. H. Andersen, M. A. Sjursen, X. Li, and M. F. Randolph. 2010. “Estimation of intact and remoulded undrained shear strengths from penetration tests in soft clays.” Géotechnique 60 (11): 843–859. https://doi.org/10.1680/geot.9.P.017.
Lu, Q., M. E. Randolph, Y. Hu, and I. C. Bugarski. 2004. “A numerical study of cone penetration in clay.” Géotechnique 54 (4): 257–267. https://doi.org/10.1680/geot.2004.54.4.257.
Lunne, T., H. P. Christophersen, and T. I. Tjelta. 1985. “Engineering use of piezocone data in North Sea clays.” In Vol. 2 of Proc., 11th Int. Conf. on Soil Mechanics and Foundation Engineering, 907–912. Rotterdam, Netherlands: AA Balkema.
Masood, T. 1990. “Determination of lateral earth pressure in soils by in-situ measurement.” Ph.D. thesis, Univ. of California.
Masood, T., and J. Mitchell. 1993. “Estimation of in situ lateral stresses in soils by cone-penetration test.” J. Geotech. Engrg. 119 (10): 1624–1639. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:10(1624).
Mayne, P. W. 2001. “Stress-strain-strength-flow parameters from enhanced in-situ tests.” In Proc., Int. Conf. on In-Situ Measurement of Soil Properties and Case Histories, Bali, Indonesia, 27–48.
Mayne, P. W. 2007. Cone penetration testing: State-of-practice. NCHRP Project 20-05, Task 37-14, 118. Washington, DC: Transportation Research Board, National Academies Press.
Powell, J. J. M., and R. S. T. Quarterman. 1988. “The interpretation of cone penetration tests in clays, with particular reference to rate effects.” In Vol. 2 of Proc., Int. Symp. on Penetration Testing, ISPT-1, 903–910. Rotterdam, Netherlands: AA Balkema.
Rad, N. S., and T. Lunne. 1988. Direct correlations between piezocone test results and undrained shear strength of clay. In Vol. 2 of Proc., Int. Symp. on Penetration Testing, ISOPT-1, 911–917. Rotterdam, Netherlands: AA Balkema.
Schnaid, F. 2009. In-situ testing in geomechanics: The main tests, 329. London: Taylor & Francis Group.
Sheng, D., L. Cui, and Y. Ansari. 2013. “Interpretation of cone factor in undrained soils via full-penetration finite-element analysis.” Int. J. Geomech., 13 (6): 745–753. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000279.
Silva, M. F., D. J. White, and M. D. Bolton. 2006. “An analytical study of the effect of penetration rate on piezocone tests in clay.” Int. J. Numer. Anal. Methods Geomech. 30 (6): 501–527. https://doi.org/10.1002/nag.490.
Skempton, A. W. 1957. “Discussion on airport paper no. 35: The planning and design of the new Hong Kong airport.” Proc. Inst. Civ. Eng. 7 (2): 305–307. https://doi.org/10.1680/iicep.1957.2568.
Teh, C. I. 1987. “An analytical study of the cone penetration test.” Ph.D. thesis, Oxford Univ.
Teh, C. I., and G. T. Houlsby. 1991. “An analytical study of the cone penetration test in clay.” Géotechnique 41 (1): 17–34. https://doi.org/10.1680/geot.1991.41.1.17.
Terzaghi, K., R. B. Peck, and G. Mesri. 1996. Soil mechanics in engineering practice. New York: John Wiley.
Vesic, A. 1972. “Expansion of cavities in infinite soil mass.” J. Soil Mech. Found. Div. 98 (3): 265–290.
Vesic, A. S. 1975. Principles of pile foundation design. Durham, NC: Duke Univ.
Walker, J., and H. S. Yu. 2006. “Adaptive finite element analysis of cone penetration in clay.” Acta Geotech. 1 (1): 43–57. https://doi.org/10.1007/s11440-006-0005-9.
Yu, H., L. Herrmann, and R. Boulanger. 2000. “Analysis of steady cone penetration in clay.” J. Geotech. Geoenviron. Eng. 126 (7): 594–605. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:7(594).
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Sep 1, 2017
Accepted: Feb 7, 2018
Published online: Jun 20, 2018
Published in print: Sep 1, 2018
Discussion open until: Nov 20, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.