Bearing Capacity Characteristics and Failure Modes of Low Geosynthetic-Reinforced Embankments Overlying Voids
Publication: International Journal of Geomechanics
Volume 18, Issue 8
Abstract
Reinforcement solutions can ensure that low geosynthetic-reinforced (LGR) embankments progressively subside instead of suddenly failing due to void collapse, which provides an early warning to allow surface refilling to be carried out. This study investigates the characteristics of the bearing capacity and failure modes of the LGR embankments overlying voids using large-deformation finite-element analysis and normalization method. The system as a whole has six distinct failure modes: the trapdoor, sidewall, combination of roof and sidewall, rotational roof, combination of roof and single sidewall, and slope failure modes. Five types of slip lines exist for the LGR embankment: the vertical, trapezoid, double-cambered, partial-vaulted, and vaulted slip lines. This study also presents the effects of influencing parameters (e.g., rupture strength of the reinforcement, location and size of the void, and height and shear strength parameters of embankment fills) on the ultimate bearing capacity of the system. Design charts are obtained to determine the required soil properties and evaluate the characteristics of the bearing capacity of the system.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support from the National Natural Science Foundation of China (Grant 41572253) is gratefully acknowledged.
References
Al-Tabbaa, A., R. Lisa, and O. R. Michael. 1989. “Model tests of footings above shallow cavities.” Ground Eng. 22 (7): 39–42.
Azam, G., M. Jao, and M. C. Wang. 1997. “Cavity effect on stability of strip footing in two-layer soils.” Geotech. Eng. 28 (2): 151–164.
Badie, A., and M. C. Wang. 1984. “Stability of spread footing above void in clay.” J. Geotech. Eng. 110 (11): 1591–1605. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:11(1591).
Baus, R. L., and M. C. Wang. 1983. “Bearing capacity of strip footing above void.” J. Geotech. Eng. 109 (1): 1–14.https://doi.org/10.1061/(ASCE)0733-9410(1983)109:1(1).
Benmebarek, S., F. Berrabah, and N. Benmebarek. 2015. “Effect of geosynthetic reinforced embankment on locally weak zones by numerical approach.” Comput. Geotech. 65: 115–125. https://doi.org/10.1016/j.compgeo.2014.12.004.
Blight, G., and A. Barrett. 1990. “Field test of catenary net to protect traffic from mining subsidence.” J. Transp. Eng. 116 (2): 135–144. https://doi.org/10.1061/(ASCE)0733-947X(1990)116:2(135).
Blivet, J. C., J. P. Gourc, P. Villard, H. Giraud, M. Khay, and A. Morbois. 2002. “Design method for geosynthetic as reinforcement for embankment subjected to localized subsidence.” In Proc., 7th Int. Conf. on Geosynthetics, 341–344. France: AA Balkema.
Briançon, L., and P. Villard. 2008. “Design of geosynthetic reinforcements for platforms spanning localized sinkholes.” Geotext. Geomembr. 26 (5): 416–428. https://doi.org/10.1016/j.geotexmem.2007.12.005.
BSI (British Standards Institute). 2010. Code of practice for strengthened/reinforced soils and other fills. BS8006, London.
Cooper, A. H., and J. M. Saunders. 2002. “Road and bridge construction across gypsum karst in England.” Eng. Geol. 65 (2–3): 217–223. https://doi.org/10.1016/S0013-7952(01)00131-4.
Das, B. M. 2017. Shallow foundations: Bearing capacity and settlement, 3rd ed. Boca Raton, FL: CRC Press.
Das, B. M., and K. H. Khing. 1994. “Foundation on layered soil with geogrid reinforcement—Effect of a void.” Geotext. Geomembr. 13 (8): 545–553. https://doi.org/10.1016/0266-1144(94)90018-3.
Fu, L. L., Q. M. Gong, and B. L. Wang, 2013. “Influence analysis of subgrade height and foundation modulus on subgrade dynamic characteristics under high-speed train load.” In Proc., Int. Conf. on Transportation Engineering., 2781–2788. Reston, VA: ASCE.
Fu, L. L., Q. M. Gong, and Y. Wang, 2011. “Analysis on dynamic transfer characteristics of low geosynthetic-reinforced embankments supported by CFG piles subjected to high-speed railway.” Adv. Mater. Res. 368–373: 2575-2580.
GGS (German Geotechnical Society). 2011. Recommendation for design and analysis of earth structures using geosynthetic reinforcements. Hoboken, NJ: Wiley.
Giroud, J. P., R. Bonaparte, J. F. Beech, and B. A. Gross. 1990. “Design of soil layer-geosynthetic systems overlying voids.” Geotext. Geomembr. 9 (1): 11–50. https://doi.org/10.1016/0266-1144(90)90004-V.
Huckert, A., L. Briançon, P. Villard, and P. Garcin. 2016. “Load transfer mechanisms in geotextile-reinforced embankments overlying voids: Experimental and analytical approaches.” Geotext. Geomembr. 44 (3): 442–456. https://doi.org/10.1016/j.geotexmem.2015.06.005.
Kinney, T. C. 1986. “Reinforced roads bridging voids.” In Proc., 4th Int. Conf. on Cold Regions Engineering, 320–329. Reston, VA: ASCE.
Kiyosumi, M., O. Kusakabe, and M. Ohuchi. 2011. “Model tests and analyses of bearing capacity of strip footing on stiff ground with voids.” J. Geotech. Geoenviron. Eng. 137 (4): 363–375. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000440.
Kiyosumi, M., O. Kusakabe, M. Ohuchi, and F. L. Peng. 2007. “Yielding pressure of spread footing above multiple voids.” J. Geotech. Geoenviron. Eng. 133 (12): 1522–1531. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:12(1522).
Lee, J. K., S. Jeong, and J. Ko. 2014. “Undrained stability of surface strip footings above voids.” Comput. Geotech. 62: 128–135. https://doi.org/10.1016/j.compgeo.2014.07.009.
Lee, J. K., S. Jeong, and J. Ko. 2015. “Effect of load inclination on the undrained bearing capacity of surface spread footings above voids.” Comput. Geotech. 66: 245–252.https://doi.org/10.1016/j.compgeo.2015.02.003.
Mehdipour, I., M. Ghazavi, and R. Z. Moayed. 2017. “Stability analysis of geocell-reinforced slopes using the limit equilibrium horizontal slice method.” Int. J. Geomech. 17 (9): 06017007. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000935.
Shalev, E., and V. Lyakhovsky. 2012. “Viscoelastic damage modeling of sinkhole formation.” J. Struct. Geol. 42: 163–170. https://doi.org/10.1016/j.jsg.2012.05.010.
Sireesh, S., T. G. Sitharam, and S. K. Dash. 2009. “Bearing capacity of circular footing on geocell–sand mattress overlying clay bed with void.” Geotext. Geomembr. 27 (2): 89–98.https://doi.org/10.1016/j.geotexmem.2008.09.005.
Smith, C. C., and A. Tatari. 2016. “Limit analysis of reinforced embankments on soft soil.” Geotext. Geomembr. 44 (4): 504–514. https://doi.org/10.1016/j.geotexmem.2016.01.008.
Villard, P., and L. Briançon. 2008. “Design of geosynthetic reinforcements for platforms subjected to localized sinkholes.” Can. Geotech. J. 45 (2): 196–209. https://doi.org/10.1139/T07-083.
Villard, P., J. P. Gourc, and H. Giraud. 2000. “A geosynthetic reinforcement solution to prevent the formation of localized sinkholes.” Can. Geotech. J. 37 (5): 987–999. https://doi.org/10.1139/t00-002.
Villard, P., A. Huckert, and L. Briançon. 2016. “Load transfer mechanisms in geotextile-reinforced embankments overlying voids: Numerical approach and design.” Geotext. Geomembr. 44 (3): 381–395. https://doi.org/10.1016/j.geotexmem.2016.01.007.
Wang, M. C., and A. Badie. 1985. “Effect of underground void on foundation stability.” J. Geotech. Eng. 111 (8): 1008–1019.https://doi.org/10.1061/(ASCE)0733-9410(1985)111:8(1008).
Wang, M. C., and C. W. Hsieh. 1987. “Collapse load of strip footing above circular void.” J. Geotech. Eng. 113 (5): 511–515. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:5(511).
Yang, Q., L. H. Zhu, J. J. He, Z. F. Yan, and R. Ren. 2011. “Analysis on dynamic transfer characteristics of low geosynthetic-reinforced embankments supported by CFG piles subjected to high-speed railway.” Adv. Mater. Res. 368–373, 2575–2580. https://doi.org/10.4028/www.scientific.net/AMR.368-373.2575.
Yang, K.-H., J. T. H. Wu, R.-H. Chen, and Y.-S. Chen. 2016. “Lateral bearing capacity and failure mode of geosynthetic-reinforced soil barriers subject to lateral loadings.” Geotext. Geomembr. 44 (6): 799–812. https://doi.org/10.1016/j.geotexmem.2016.06.014.
Zhuang, Y., and K. Y. Wang. 2016. “Finite-element analysis on the effect of subsoil in reinforced piled embankments and comparison with theoretical method predictions.” Int. J. Geomech. 16 (5): 04016011. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000628.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Oct 10, 2017
Accepted: Feb 2, 2018
Published online: May 24, 2018
Published in print: Aug 1, 2018
Discussion open until: Oct 24, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.