Numerical Investigation of Axial Monotonic Performance of Reinforced Helical Pulldown Micropiles
Publication: International Journal of Geomechanics
Volume 18, Issue 10
Abstract
The axial compression behavior of reinforced helical pulldown micropiles (RHPMs) and fiber-reinforced polymer (FRP)-RHPMs is investigated through three-dimensional finite-element (FE) analysis. The model was calibrated using the results of full-scale load tests conducted by the authors. The calibrated numerical model was then used to conduct a parametric study to examine the behavior of RHPMs and FRP-RHPMs in different soil conditions. The numerical analysis provided important insights into the load-transfer mechanism, shaft resistance, and factors influencing the pile response. Based on the results of the numerical simulations coupled with experimental data, design guidelines are developed for the implementation of RHMPs and FRP-RHPMs in foundation design.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank EBS Engineering and Construction Ltd. for funding the experimental program. In particular, the authors would like to extend their gratitude to Paul Sunseth, Dino Vito, and Roy Frater.
References
AASHTO. 1996. AASHTO LRFD bridge design specifications. 7th ed. Washington, DC: AASHTO.
Abd Elaziz, A. Y., and M. H. El Naggar. 2012. “Axial behaviour of hollow core micropiles under monotonic and cyclic loadings.” Geotech. Testing J. 35 (2): 249–260.
Abdelghany, Y. 2008. “Monotonic and cyclic performance of helical screw piles.” Ph.D. thesis, Univ. of Western Ontario.
Armour, T., P. Groneck, J. Keeley, and S. Sharma. 2000. Micropile design and construction guidelines-implementation manual FHWA-SA-97-070. Washington, DC: Federal Highway Administration.
Bagheri, F., and M. H. El Naggar. 2015. “Effects of installation disturbance on behavior of multi-helix piles in structured clays.” J. Found. 9 (2): 80–91. https://doi.org/10.1179/1937525515Y.0000000008.
Bjerrum, L. 1957. “Norwegian experiences with steel piles to rock.” Géotechnique 7 (2): 73–96. https://doi.org/10.1680/geot.1957.7.2.73.
Canadian Geotechnical Society. 2006. Canadian foundation engineering manual. Richmond, BC, Canada: Canadian Geotechnical Society.
Cook, R. D., D. S. Malkus, M. E. Plesha, and R. J. Witt. 2002. Concepts and applications of finite element analysis. New York: John Wiley & Sons.
CSA (Canadian Standards Association). 2014. Canadian highway bridge design code. Mississauga, ON, Canada: Canadian Standards Association.
Elkasabgy, M., and M. H. El Naggar. 2015. “Axial compressive response of large-capacity helical and driven steel piles in cohesive soil.” Can. Geotech. J. 52 (2): 224–243. https://doi.org/10.1139/cgj-2012-0331.
El Naggar, Y., and Y. Abdelghany. 2007a. “Helical screw piles capacity for axial cyclic loadings in cohesive soils.” In Proc., 4th Int. Conf. on Earthquake Geotechnical Engineering.
El Naggar, Y., and Y. Abdelghany. 2007b. “Seismic helical screw foundation systems.” In Proc., 60th Canadian Geotechnical Conf., 21–24. Ottawa: Canadian Geotechnical Society.
El Sharnouby, M. M. 2013. “Monotonic and cyclic behaviour of steel fibre-reinforced and FRP-steel fibre-reinforced helical pulldown micropiles.” Ph.D. thesis, Univ. of Western Ontario.
El Sharnouby, M. M., and M. H. El Naggar. 2012a. “Axial monotonic and cyclic performance of fibre-reinforced polymer (FRP)–steel fibre–reinforced helical pulldown micropiles (FRP-RHPM).” Can. Geotech. J. 49 (12): 1378–1392. https://doi.org/10.1139/cgj-2012-0009.
El Sharnouby, M. M., and M. H. El Naggar. 2012b. “Field investigation of axial monotonic and cyclic performance of reinforced helical pulldown micropiles.” Can. Geotech. J. 49 (5): 560–573. https://doi.org/10.1139/t2012-017.
Elsherbiny, Z., and M. H. El Naggar. 2013. “Axial compressive capacity of helical piles from field tests and numerical study.” Can. Geotech. J. 50 (12): 1191–1203. https://doi.org/10.1139/cgj-2012-0487.
Fahmy, A., and M. H. El Naggar. 2016a. “Cyclic axial performance of helical-tapered piles in sand.” J. Deep Found. Inst. 10 (3): 98–110. https://doi.org/10.1080/19375247.2016.1211353.
Fahmy, A., and M. H. El Naggar. 2016b. “Cyclic lateral performance of helical tapered piles in silty sand.” J. Deep Found. Inst. 10 (3): 111–124. https://doi.org/10.1080/19375247.2017.1286428.
Fahmy, A., and M. H. El Naggar. 2017. “Axial performance of helical tapered piles in sand.” Geotech. Geol. Eng. J. 35 (4): 1549–1576. https://doi.org/10.1007/s10706-017-0192-1.
FHWA (Federal Highway Administration). 2005. Micropiles design and construction. FHWA-NHI-05-039. Washington, DC: Federal Highway Administration.
Gordon, A. F., N. Farzaneh, D. David, J. B. Richard, and D. V. Griffiths. 2016. “Reliability-based geotechnical design in 2014 Canadian Highway Bridge Design Code.” Can. Geotech. J. 53 (2): 236–251. https://doi.org/10.1139/cgj-2015-0158.
Gouvenot, D. 1975. “Essais de chargement et de plambement de pieux aiguelles.” Annals de ITdB et de Travau Publics 334: (Dec).
Haldar, S., and B. Sivakumar. 2010. “Failure mechanisms of pile foundations in liquefiable soil: Parametric study.” Int. J. Geomech. 10 (2): 74–88. https://doi.org/10.1061/(ASCE)1532-3641(2010)10:2(74).
Hoyt, R., G. Seider, L. Reese, M. Hon, and S. Wang. 1995. “Buckling of helical anchors used for underpinning.” In Foundation upgrading and repair for infrastructure improvement, Geotechnical special publication 50, 89–108. Reston VA: ASCE.
ICC-ES (ICC Evaluation Service, Inc.). 2007. Acceptance criteria for helical foundation systems and devices. AC358. Whittier, CA: ICC Evaluation Service, Inc.
Jeon, S., and F. Kulhawy 2001. “Evaluation of axial compression behavior of micropiles.” In 2001: A geo-odyssey: Foundations and ground improvement, Geotechnical special publication 113, 460–471. Reston, VA: ASCE.
Kulhawy, F. H., and P. W. Mayne. 1990. Manual on estimating soil properties for foundation design, project 1493-6. Palo Alto, CA: Electric Power Research Institute.
Livneh, B., and M. H. El Naggar. 2008. “Axial testing and numerical modeling of square shaft helical piles under compressive and tensile loading.” Can. Geotech. J. 45 (8): 1142–1155. https://doi.org/10.1139/T08-044.
Mascardi, C. A. 1970. Comportamento dei Micropali Sottoposti a Sforzo Assiale, Momento Flettente e Taglio. Zurich, Switzerland: Verlag Leeman.
Mason, J. A. 1993. Caltrans pile load test results at a deep bay mud site using various pile types: A DFI and Caltrans specialty seminar, September 9 and 10, 1933, 44. Sacramento, CA: Caltrans.
McCabe, B., and B. Sheil. 2015. “Pile group settlement estimation: Suitability of nonlinear interaction factors.” Int. J. Geomech. 15 (3): 14014056. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000395.
Merifield, R. 2011. “Ultimate uplift capacity of multiplate helical type anchors in clay.” J. Geotech. Geoenviron. Eng. 137 (7): 704–716. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000478.
Merifield, R. S., and C. C. Smith. 2010. “The ultimate uplift capacity of multi-strip anchors in undrained clay.” Comput. Geotech. 37 (4): 504–514. https://doi.org/10.1016/j.compgeo.2010.02.004.
Meyerhof, G. 1976. “Bearing capacity and settlement of pile foundations.” J. Geotech. Eng. Div. 102 (3): 195–228.
Mooney, J. S., S. Adamczak, Jr., and S. P. Clemence. 1985. “Uplift capacity of helical anchors in clay and silt.” In Proc., Uplift Behavior of Anchor Foundations in Soil, 48–72. New York: American Society of Civil Engineers.
Narasimha Rao, N., and Y. Prasad. 1993. “Estimation of uplift capacity of helical anchors in clay.” J. Geotech. Engrg. 119 (2): 352–357. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:2(352).
Perko, H. A. 2003. “Lateral capacity and buckling of helix pier foundations.” In Proc., Foundations Technology Seminar—Helical Foundations and Tiebacks. Hawthorne, NJ: Deep Foundations Institute.
Perko, H. A. 2009. Helical piles: A practical guide to design and installation. Hoboken, NJ: John Wiley & Sons.
Prakash, S., and H. D. Sharma. 1990. Pile foundations in engineering practice. New York: Wiley.
Reul, O. 2004. “Numerical study of the bearing behavior of piled rafts.” Int. J. Geomech. 4 (2): 59–68. https://doi.org/10.1061/(ASCE)1532-3641(2004)4:2(59).
Sakr, M. 2009. “Performance of helical piles in oil sand.” Can. Geotech. J. 46 (9): 1046–1061. https://doi.org/10.1139/T09-044.
Sivrikaya, O., and E. Toğrol. 2006. “Determination of undrained strength of fine-grained soils by means of SPT and its applications in Turkey.” Eng. Geol. 86 (1): 52–69. https://doi.org/10.1016/j.enggeo.2006.05.002.
Terzaghi, K. 1942. “Discussion of the progress report of the committee on the bearing value of pile foundations.” In Vol. 59 of Proc., Earth and Foundations, 1363–1372. Reston, VA: ASCE.
Vickers, R. A., and S. P. Clemence. 2000. “Performance of helical piles with grouted shafts.” In Vol. 288 of Proc., of Sessions of Geo-Denver 2000—New Technological and Design Developments in Deep Foundations, GSP 100, 327–341. Reston, VA: ASCE. https://doi.org/10.1061/(ASCE)1532-3641(2004)4:2(59).
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jun 14, 2017
Accepted: Dec 12, 2017
Published online: Jul 17, 2018
Published in print: Oct 1, 2018
Discussion open until: Dec 17, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.