Semianalytical Solution to Determine Minimum Safety Thickness of Rock Resisting Water Inrush from Filling-Type Karst Caves
Publication: International Journal of Geomechanics
Volume 18, Issue 2
Abstract
A semianalytical solution to determine the minimum safety thickness of the rock resisting water inrush from filling-type karst caves was investigated. Mechanical analyses of the filling materials in karst caves located in a top, bottom, and lateral position to the tunnel were carried out by referring to the principle of the slice method. The mechanical mechanism of rock resisting water inrush was analyzed by adopting the theory of elastic mechanics. The semiquantitative analytical method for calculating the minimum safety thickness of the rock for resisting water inrush was achieved according to the bending strength and shear strength of the rock. The safety-thickness-prediction models of rock for resisting water inrush were applied in practical projects of the Luzhuba tunnel. The accuracy and availability of the proposed method were proven by comparing with the rock stratum thickness–span ratio method. The minimum safety thickness affected by the depth-span ratio of the filling-type karst cave, shear strength indexes of the filling materials, and the depth of the tunnel was analyzed and discussed. The results show that the minimum safety thickness of the rock resisting water inrush (1) decreases 0.02 m for every 2-m increase in cave height and increases 0.01 m for every 2-m increase in cave span such that the influence of the karst cave height is greater than the karst cave span on the minimum safety thickness; (2) decreases gradually with an increase of effective soil cohesion and decreases 0.03 m for every 5° increase in effective internal friction angle of the soil; and (3) increases 0.18 m for every 1-m increase in tunnel depth.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We acknowledge the financial support from the National Natural Science Foundation of China (Grants 51509147 and 51379114), National Basic Research Program of China (973 Program 2013CB036000) and China Postdoctoral Science Foundation (Grants 2014M551908 and 2016T90633).
References
Anagnostou, G., and Perazzelli, P. (2015). “Analysis method and design charts for bolt reinforcement of the tunnel face in cohesive-frictional soils.” Tunnelling Underground Space Technol.,47(Mar), 162–181.
Benardos, A. G., and Kaliampakos, D. C. (2004). “A methodology for assessing geotechnical hazards for TBM tunnelling—Illustrated by the Athens Metro, Greece.” Int. J. Rock Mech. Min.,41(6), 987–999.
Fellin, W., King, J., Kirsch, A., and Oberguggenberger, M. (2010). “Uncertainty modelling and sensitivity analysis of tunnel face stability.” Struct. Saf.,32(6), 402–410.
Gan, K.-R., Yang, Y., and Li, J.-S. (2007). “Analysis on karst water inflow mechanisms and determination of thickness of safe rock walls: Case study on a tunnel.” Tunnel Constr.,27(3), 13–16.
Guo, J. Q. (2011). “Study on against-inrush thickness and water burst mechanism of karst tunnel.” Ph.D. dissertation,Beijing Jiaotong Univ.,Beijing.
Guo, J. Q., and Qiao, C. S. (2012). “Study on water-inrush mechanism and safety thickness of rock wall of karst tunnel face.” J. China Railway Soc.,34(3), 105–111.
Han, K., Zhang, C., and Zhang, D. (2016). “Upper-bound solutions for the face stability of a shield tunnel in multilayered cohesive–frictional soils.” Comput. Geotech.,79(Oct), 1–9.
Ibrahim, E., Soubra, A. H., Mollon, G., Raphael, W., Dias, D., and Reda, A. (2015). “Three-dimensional face stability analysis of pressurized tunnels driven in a multilayered purely frictional medium.” Tunnelling Underground Space Technol.,49(Jun), 18–34.
Ju, J., and Xu, J. (2013). “Structural characteristics of key strata and strata behaviour of a fully mechanized longwall face with 7.0 m height chocks.” Int. J. Rock Mech. Min.,58(Feb), 46–54.
Li, S. C., et al. (2015). “Minimum safety thickness of water and mud inrush induced by filled-type karst water bearing structures based on the theory of slice method.” Rock Soil Mech.,36(7), 1989–1994.
Li, S. C., et al. (2016). “Numerical analysis of water flow characteristics after inrushing from the tunnel floor in process of karst tunnel excavation.” Geomech. Eng.,10(4), 471–526.
Li, X., and Li, Y. (2014). “Research on risk assessment system for water inrush in the karst tunnel construction based on GIS: Case study on the diversion tunnel groups of the Jinping II Hydropower Station.” Tunnelling Underground Space Technol.,40(Feb), 182–191.
Li, L. P., Li, S. C., and Zhang, Q. S. (2010). “Study of mechanism of water inrush induced by hydraulic fracturing in karst tunnels.” Rock Soil Mech.,31(2), 523–528.
Liu, Z. W. (2004). “Karst water burst mechanism and prevention countermeasures in Yuanliangshan tunnel.” Ph.D. dissertation,China Univ. of Geoscience,Beijing.
Liu, Z.-W., He, M.-C., and Wang, S.-R. (2006). “Study on karst waterburst mechanism and prevention countermeasures in Yuanliangshan tunnel.” Rock Soil Mech.,27(2), 228–232.
Pan, Q., and Dias, D. (2016). “Face stability analysis for a shield-driven tunnel in anisotropic and nonhomogeneous soils by the kinematical approach.” Int. J. Geomech., 04015076.
Pesendorfer, M., and Loew, S. (2010). “Subsurface exploration and transient pressure testing from a deep tunnel in fractured and karstified limestones (Lötschberg Base Tunnel, Switzerland).” Int. J. Rock Mech. Min.,47(1), 121–137.
Rangel, J. L., Iturrarán-Viveros, U., Gustavo Ayala, A., and Cervantes, F. (2005). “Tunnel stability analysis during construction using a neuro-fuzzy system.” Int. J. Numer. Anal. Methods Geomech.,29(15), 1433–1456.
Shin, H. S., Kwon, Y. C., Jung, Y. S., Bae, G. J., and Kim, Y. G. (2009). “Methodology for quantitative hazard assessment for tunnel collapses based on case histories in Korea.” Int. J. Rock Mech. Min.,46(6), 1072–1087.
Song, Z. P. (2006). “Research on the influence of concealed karst caverns upon the stability of tunnels and its support structure.” Ph.D. dissertation,Xi’an Univ. of Technology,Xi’an, China.
Talmon, A. M., and Bezuijen, A. (2013). “Analytical model for the beam action of a tunnel lining during construction.” Int. J. Numer. Anal. Methods Geomech.,37(2), 181–200.
Wang, J. A., and Park, H. D. (2003). “Coal mining above a confined aquifer.” Int. J. Rock Mech. Min.,40(4), 537–551.
Wang, Y., Qiao, C. S., Sun, C. H., and Liu, K. Y. (2006). “Forecasting model of safe thickness for roof of karst cave tunnel based on support vector machines.” Rock Soil Mech.,27(6), 1000–1004.
Wu, M. J., Xu, X. B., Zhao, M. J., and Liu, X. H. (2004). “Construction mechanics response study of highway tunnel in karst.” Chinese J. Rock Mech. Eng.,23(9), l525–1529.
Yalcin, E., Gurocak, Z., Ghabchi, R., and Zaman, M. (2016). “Numerical analysis for a realistic support design: case study of the Komurhan Tunnel in Eastern Turkey.” Int. J. Geomech., 05015001.
Yang, F., and Yang, J. S. (2010). “Stability of shallow tunnel using rigid blocks and finite-element upper bound solutions.” Int. J. Geomech., 242–247.
Zhang, M. (2010). Karst fault tunnel construction technology of Yichang-Wanzhou railway,Science Press,Beijing.
Zhang, N., Yuan, L., Han, C., Xue, J., and Kan, J. (2012). “Stability and deformation of surrounding rock in pillarless gob-side entry retaining.” Saf. Sci.,50(4), 593–599.
Zhang, J., Yang, F., Yang, J. S., Zheng, X. C., and Zeng, F. X. (2016). “Upper-bound stability analysis of dual unlined elliptical tunnels in cohesive-frictional soils.” Comput. Geotech.,80(Dec), 283–289.
Zou, J. F., and Su, Y. (2015). “Theoretical solutions of a circular tunnel with the influence of the out-of-plane stress based on the generalized Hoek–Brown failure criterion.” Int. J. Geomech.,16(3), 06015006.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 18 • Issue 2 • February 2018
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Feb 22, 2017
Accepted: Sep 7, 2017
Published online: Dec 13, 2017
Published in print: Feb 1, 2018
Discussion open until: May 13, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.