Constrained Particle Swarm Optimization Algorithm Applied to Slope Stability
Publication: International Journal of Geomechanics
Volume 17, Issue 12
Abstract
This article addresses the problem of the stability of a slope within the framework of the yield design theory (YDT), which is a rigorous method that avoids assumptions that could affect the obtained results. The case of a nonvertical slope with an angle at the toe and at the crest using multirotational rigid-block failure mechanisms is investigated. For fixed geometrical and mechanical parameters, the implementation of the upper-bound kinematic method permitted the definition of an optimization problem with five decision variables characterizing the failure mechanism. A constrained global optimization problem was then formulated and converted into an equivalent unconstrained one to get an upper-bound estimate of the studied slope-stability factor. A well-known particle swarm optimization (PSO) algorithm was then used for both its simplicity and efficiency in unconstrained optimization problems. The previous results for the stability factor have been improved and generalized.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahangar-Asr, A., Faramarzi, A., and Javadi, A. A. (2010). “A new approach for prediction of the stability of soil and rock slopes.” Eng. Comput., 27(7), 878–893.
Baker, R. (1980). “Determination of the critical slip surface in slope stability computations.” Int. J. Numer. Anal. Methods Geomech., 4(4), 333–359.
Baker, R., and Garber, M. (1978). “Theoretical analysis of the stability of slopes.” Géotechnique, 28(4), 395–411.
Bekaert, A. (1995). “Improvement of the kinematic bound for the stability of a vertical cut-off.” Mech. Res. Commun., 22(6), 533–540.
Bishop, A. W. (1955). “The use of the slip circle in the stability analysis of slopes.” Géotechnique, 5(1), 7–17.
Chen, J., Yin, J.-H., and Lee, C. F. (2003). “Upper bound limit analysis of slope stability using rigid finite elements and nonlinear programming.” Can. Geotech. J., 40(4), 742–752.
Chen, W.-F. (1975). Limit analysis and soil plasticity, Elsevier, Amsterdam, Netherlands.
Chen, Z.-Y., and Shao, C.-M. (1988). “Evaluation of minimum factor of safety in slope stability analysis.” Can. Geotech. J., 25(4), 735–748.
Cheng, Y. M., Lansivaara, T., and Wei, W. B. (2007). “Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods.” Comput. Geotech., 34(3), 137–150.
Cheng, Y. M., Liang, L., Chi, S. C., and Wei, W. B. (2008). “Determination of the critical slip surface using artificial fish swarms algorithm.” J. Geotech. Geoenviron. Eng., 244–251.
Coello, C. A. C. (2002). “Theoretical and numerical constraint-handling techniques used with evolutionary algorithms: A survey of the state of the art.” Comput. Methods Appl. Mech. Eng., 191(11–12), 1245–1287.
DeNatale, J. S. (1991). “Rapid identification of critical slip surfaces: Structure.” J. Geotech. Eng., 1568–1589.
Eberhart, R. C., Shi, Y., and Kennedy, J. (2001). Swarm intelligence, Morgan Kaufmann, Burlington, MA.
Eid, H. T. (2014). “Stability charts for uniform slopes in soils with nonlinear failure envelopes.” Eng. Geol., 168, 38–45.
Erzin, Y., and Cetin, T. (2013). “The prediction of the critical factor of safety of homogeneous finite slopes using neural networks and multiple regressions.” Comput. Geosci., 51, 305–313.
Floudas, C. A., and Pardalos, P. M. (1990). A collection of test problems for constrained global optimization algorithms, Springer, Berlin.
Griffiths, D. V., and Lane, P. A. (1999). “Slope stability analysis by finite elements.” Géotechnique, 49(3), 387–403.
Hock, W., and Schittkowski, K. (1980). “Test examples for nonlinear programming codes.” J. Optim. Theor. Appl., 30(1), 127–129.
Homaifar, A., Qi, C. X., and Lai, S. H. (1994). “Constrained optimization via genetic algorithms.” Simulation, 62(4), 242–253.
Janbu, N., Bjerrum, L., and Kjaernsli, B. (1956). Soil mechanics applied to some engineering problems, Norwegian Geotechnical Institute, Oslo, Norway.
Kammoun, Z., Pastor, F., Smaoui, H., and Pastor, J. (2010). “Large static problem in numerical limit analysis: A decomposition approach.” Int. J. Numer. Anal. Methods Geomech., 34(18), 1960–1980.
Kostić, S., Vasović, N., and Sunarić, D. (2016). “Slope stability analysis based on experimental design.” Int. J. Geomech., 04016009.
Li, Y.-C., Chen, Y.-M., Zhan, T. L., Ling, D.-S., and Cleall, P. J. (2010). “An efficient approach for locating the critical slip surface in slope stability analyses using a real-coded genetic algorithm.” Can. Geotech. J., 47(7), 806–820.
Liu, Z., Shao, J., Xu, W., Chen, H., and Zhang, Y. (2014). “An extreme learning machine approach for slope stability evaluation and prediction.” Nat. Hazards, 73(2), 787–804.
Manouchehrian, A., Gholamnejad, J., and Sharifzadeh, M. (2014). “Development of a model for analysis of slope stability for circular mode failure using genetic algorithm.” Environ. Earth Sci., 71(3), 1267–1277.
Martin, C. M. (2011). “The use of adaptive finite-element limit analysis to reveal slip-line fields.” Géotechnique Lett., 1(2), 23–29.
Michalowski, R. (1995). “Slope stability analysis: A kinematical approach.” Géotechnique, 45(2), 283–293.
Morgenstern, N. R., and Price, V. E. (1965). “The analysis of the stability of general slip surfaces.” Géotechnique, 15(1), 79–93.
Nguyen, V. U. (1985). “Determination of critical slope failure surfaces.” J. Geotech. Eng., 238–250.
Nian, T.-K., Jiang, J.-C., Wang, F.-W., Yang, Q., and Luan, M.-T. (2016). “Seismic stability analysis of slope reinforced with a row of piles.” Soil Dyn. Earthquake Eng., 84, 83–93.
OptumG2 [Computer software]. OptumCE, Copenhagen, Denmark.
Parsopoulos, K. E., Plagianakos, V. P., Magoulas, G. D., and Vrahatis, M. N. (2001). “Stretching technique for obtaining global minimizers through particle swarm optimization.” Proc., Particle Swarm Optimization Workshop (PSOW), Purdue School of Engineering and Technology, Indianapolis.
Salençon, J. (1990). “An introduction to the yield design theory and its applications to soil mechanics.” Eur. J. Mech. A. Solids, 9(5), 477–500.
Spencer, E. (1967). “A method of analysis of the stability of embankments assuming parallel inter-slice forces.” Géotechnique, 17(1), 11–26.
Sun, J., Li, J., and Liu, Q. (2008). “Search for critical slip surface in slope stability analysis by spline-based GA method.” J. Geotech. Geoenviron. Eng., 252–256.
Taylor, D. W. (1937). “Stability of earth slopes.” J. Boston Soc. Civ. Eng., 24, 197–246.
Yang, J.-M., Chen, Y.-P., Horng, J.-T., and Kao, C.-Y. (1997). “Applying family competition to evolution strategies for constrained optimization.” Proc., Int. Conf. on Evolutionary Programming, Springer, London, 201–211.
Yeniay, Ö. (2005). “Penalty function methods for constrained optimization with genetic algorithms.” Math. Comput. Appl., 10(1), 45–56.
Zheng, H., Liu, D. F., and Li, C. G. (2005). “Slope stability analysis based on elasto-plastic finite element method.” Int. J. Numer. Methods Eng., 64(14), 1871–1888.
Zolfaghari, A. R., Heath, A. C., and McCombie, P. F. (2005). “Simple genetic algorithm search for critical non-circular failure surface in slope stability analysis.” Comput. Geotech., 32(3), 139–152.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Sep 21, 2016
Accepted: Jun 14, 2017
Published online: Oct 3, 2017
Published in print: Dec 1, 2017
Discussion open until: Mar 3, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.