Factors Affecting Piping Erosion Resistance: Revisited with a Numerical Modeling Approach
Publication: International Journal of Geomechanics
Volume 17, Issue 11
Abstract
Piping poses a great threat to dam and levee systems across the globe. Although various straightforward approaches have been used to assess piping resistance, a fundamental understanding of the complex soil–flow interactions in this process is still lacking. Practitioners have traditionally relied on Terzaghi’s theory to evaluate piping potential. In this study, the factors affecting piping resistance are revisited using a coupled computational fluid dynamics and discrete element method (CFD-DEM) approach. A series of simulations were conducted to investigate the effects of specific gravity, initial void ratio, particle size distribution, sample aspect ratio, and frictional coefficients. Analyses of simulation results show good agreement with experimental results in the existing literature providing demonstrative explanations for deviations of the experimental results from Terzaghi’s theory. A key finding is that for laboratory experiments with soil samples in a container, the wall friction and the aspect ratio significantly affect the critical hydraulic gradients. The effects of the various soil properties are first analyzed on an individual basis; based on the numerical simulation results, a theoretical model for piping is developed that considers the previously mentioned factors.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research is funded by the startup package for the first author provided by the College of Engineering at The University of Akron. The support is appreciated.
References
Ai, J., Chen, J. F., Rotter, J. M., and Ooi, J. Y. (2011). “Assessment of rolling resistance models in discrete element simulations.” Powder Technol., 206(3), 269–282.
Alsaydalani, M., and Clayton, C. (2014). “Internal fluidization in granular soils.” J. Geotech. Geoenviron. Eng., 040130241.
Anderson, T. B., and Jackson, R. O. Y. (1967). “Fluid mechanical description of fluidized beds.” Ind. Eng. Chem. Fundam., 6(4), 527–539.
Annandale, G. (2004). “Simulation of dam breach initiated by cracks and earth fissures in semi-arid and arid environments.” Proc., ASDSO Dam Safety, Phoenix, AZ.
Calamak, M., and Yanmaz, A. (2017). “Uncertainty quantification of transient unsaturated seepage through embankment dams.” Int. J. Geomech., 04016125.
CFDEM [Computer software]. CFDEMresearch, Linz, Austria.
Chand, R., Khaskheli, M. A., Qadir, A., Ge, B., and Shi, Q. (2012). “Discrete particle simulation of radial segregation in horizontally rotating drum: Effects of drum-length and non-rotating end-plates.” Physica A, 391(20), 4590–4596.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
DiFelice, R. (1994). “The voidage function for fluid-particle interaction systems.” Int. J. Multiphase Flow, 20(1), 47–65.
Fair, G. M., Hatch, L. P., and Hudson, H. E. (1933). “Fundamental factors governing the streamline flow of water through sand [with discussion].” J. Am. Water Works Assn., 25(11), 1551–1565.
Fell, R., and Wan, C. (2003). “Time for development of internal erosion and piping in embankment dams.” J. Geotech. Geoenviron. Eng., 307–314.
Fleshman, M., and Rice, J. (2014). “Laboratory modeling of the mechanisms of piping erosion initiation.” J. Geotech. Geoenviron. Eng., 04014017.
Foster, M. A., Fell, R., and Spannagle, M. (1998). “Analysis of embankment dam incidents.” UNICIV Rep. No. R-374, Univ. of New South Wales, Sydney, Australia.
Foster, M. A., Fell, R., and Spannagle, M. (2000a). “A method for estimating the relative likelihood of failure of embankment dams by internal erosion and piping.” Can. Geotech. J., 37(5), 1025–1061.
Foster, M. A., Fell, R., and Spannagle, M. (2000b). “The statistics of embankment dam failures and accidents.” Can. Geotech. J., 37(5), 1000–1024.
Goniva, C., Kloss, C., Deen, N. G., Kuipers, J. A. M., and Pirker, S. (2012). “Influence of rolling friction on single spout fluidized bed simulation.” Particuology, 10(5), 582–591.
Goniva, C., Kloss, C., Hager, A., and Pirker, S. (2010).“An Open Source CFD-DEM Perspective.” Proc., 5th OpenFOAM Workshop, Gothenburg, Sweden.
Horne, M. R. (1969). “The behaviour of an assembly of rotund, rigid, cohesionless particles. Ш.” Proc. R. Soc. London, Ser. A., 310(1500), 21–34.
Jansen, R. B. (1983). Dams and public safety: A water resources technical publication, U.S. Dept. of the Interior, Bureau of Reclamation, Denver, 332.
Jasak, H., Jemcov, A., and Tukovic, Z. (2007). “OpenFOAM: A C++ library for complex physics simulations.” Proc., Int. Workshop on Coupled Methods in Numerical Dynamics, Dubrovnik, Croatia, Vol. 1000.
Jones, J. A. A. (1981). The nature of soil piping: A review of research, Geo Books, Norwich, U.K., 301.
Kenney, T. C., and Lau, D. (1985). “Internal stability of granular filters.” Can. Geotech. J., 22(2), 215–225.
Khilar, K., Fogler, H., and Gray, D. (1985). “Model for piping-plugging in earthen structures.” J. Geotech. Eng., 833–846.
Kloss, C., and Goniva, C. (2010). “LIGGGHTS–A new open source discrete element simulation software.” Proc., Fifth Int. Conf. on Discrete Element Methods, London, 25–26.
Kloss, C., Goniva, C., Hager, A., Amberger, S., and Pirker, S. (2012). “Models, algorithms and validation for opensource DEM and CFD-DEM.” Progr. Comput. Fluid Dyn., 12(2–3), 140–152.
Koenders, M., and Sellmeijer, J. (1992). “Mathematical model for piping.” J. Geotech. Eng., 943–946.
LAMMPS [Computer software]. Sandia National Laboratories, Livermore, CA.
Lane, E. W. (1935). “Security from under-seepage-masonry dams on earth foundations.” Trans. Am. Soc. Civ. Eng., 100(1), 1235–1272.
LIGGGHTS PUBLIC 3.7.0 [Computer software]. DCS Computing, Linz, Austria.
Marot, D., Le, V. D., Garnier, J., Thorel, L., and Audrain, P. (2012). “Study of scale effect in an internal erosion mechanism: Centrifuge model and energy analysis.” Eur. J. Environ. Civ. Eng., 16(1), 1–19.
Mindlin, R. D., and Deresiewicz, H. (1953). “Elastic spheres in contact under varying oblique forces.” J. Appl. Mech., 20(5), 327–344.
Mitchell, J. K., and Soga, K. (2005). Fundamentals of soil behavior, Wiley, New York, 577.
Ojha, C., Singh, V., and Adrian, D. (2001). “Influence of porosity on piping models of levee failure.” J. Geotech. Geoenviron. Eng., 1071–1074.
Ojha, C., Singh, V., and Adrian, D. (2003). “Determination of critical head in soil piping.” J. Hydraul. Eng., 511–518.
OpenFOAM 2.3.1 [Computer software]. OpenCFD Ltd., Bracknell, U.K.
Ranaivomanana, H., Razakamanantsoa, A., and Amiri, O. (2016). “Permeability prediction of soils including degree of compaction and microstructure.” Int. J. Geomech., 04016107.
Rice, J. (2015). “Closure to ‘Laboratory modeling of the mechanisms of piping erosion initiation’ by Mandie S. Fleshman and John D. Rice.” J. Geotech. Geoenviron. Eng., 07015016. 07015016.
Richards, K. S., and Reddy, K. R. (2007). “Critical appraisal of piping phenomena in earth dams.” Bull. Eng. Geol. Environ., 66(4), 381–402.
Schmertmann, J. H. (2000). “The no-filter factor of safety against piping through sands.” Judgement and innovation: The heritage and future of the geotechnical engineering profession, Geotechnical special publication, 111, ASCE, Reston VA, 65–132.
Tao, H., and Tao, J. (2017). “Quantitative analysis of piping erosion micro-mechanisms with coupled CFD and DEM method.” Acta Geotech., 12(3), 573–592.
Terzaghi, K. (1922). “The failure of dams by piping and its prevention.” Die Wasserkraft, 17, 445–449.
Terzaghi, K. (1943). Theoretical soil mechanics, John Wiley & Sons, New York, 510.
Tomlinson, S. S., and Vaid, Y. P. (2000). “Seepage forces and confining pressure effects on piping erosion.” Can. Geotech. J., 37(1), 1–13.
Van Beek, V. M., Bezuijen, A., Sellmeijer, J. B., and Barends, F. B. J. (2014). “Initiation of backward erosion piping in uniform sands.” Géotechnique, 64(12), 927–941.
Van Buijtenen, M. S., Van Dijk, W.-J., Deen, N. G., Kuipers, J. A. M., Leadbeater, T., and Parker, D. J. (2011). “Numerical and experimental study on multiple-spout fluidized beds.” Chem. Eng. Sci., 66(11), 2368–2376.
Wan, C., and Fell, R. (2004). “Investigation of rate of erosion of soils in embankment dams.” J. Geotech. Geoenviron. Eng., 373–380.
Wan, C., and Fell, R. (2008). “Assessing the potential of internal instability and suffusion in embankment dams and their foundations.” J. Geotech. Geoenviron. Eng., 401–407.
Wensrich, C. M., and Katterfeld, A. (2012). “Rolling friction as a technique for modelling particle shape in DEM.” Powder Technol., 217(Feb), 409–417.
Yan, C., and Zheng, H. (2017). “Three-dimensional hydromechanical model of hydraulic fracturing with arbitrarily discrete fracture networks using finite-discrete element method.” Int. J. Geomech., 04016133.
Zhao, J., and Shan, T. (2013). “Coupled CFD–DEM simulation of fluid–particle interaction in geomechanics.” Powder Technol., 239(May), 248–258.
Zhou, Z., Yang, H., Wang, X., and Liu, B. (2017). “Model development and experimental verification for permeability coefficient of soil–rock mixture.” Int. J. Geomech., 04016106.
Zhou, Z. Y., Kuang, S. B., Chu, K. W., and Yu, A. B. (2010). “Discrete particle simulation of particle–fluid flow: Model formulations and their applicability.” J. Fluid Mech., 661, 482–510.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Aug 3, 2016
Accepted: May 23, 2017
Published online: Aug 28, 2017
Published in print: Nov 1, 2017
Discussion open until: Jan 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.