Limit Analysis Method for Evaluating Soil Resistance to Lateral Motions of Pipelines Partially Embedded in a Seafloor
Publication: International Journal of Geomechanics
Volume 17, Issue 9
Abstract
The lateral soil resistance available to pipelines partially embedded in a seafloor is of interest in evaluating pipeline lateral buckling capacity, stability under forces resulting from current loads, or route pullout loads. An upper-bound limit analysis method, including equilibrium requirements in a manner common to lower-bound theories, was used to evaluate lateral soil resistance to pipe displacements. The method is applicable to sand and clay foundations with homogeneous or layered conditions. Comparisons with results from physical tests and other limit analysis and finite-element investigations are presented. The numerical limit analysis procedure was implemented through numerical-computing software. An optimization procedure was used to identify the minimum resistance satisfying the governing objective equations. The seafloor surface geometry may include soil berms or other features. The soil strength may be described by a linear Mohr-Coulomb criterion or a curved criterion representing a varying material friction angle.
Get full access to this article
View all available purchase options and get full access to this article.
References
Baker, R., and Frydman, S. (1983). “Upper bound limit analysis of soil with non-linear failure criterion.” Soils Found., 23(4), 34–42.
Chatterjee, S. (2012). “Numerical modelling of pipe-soil interactions.” Ph.D. thesis, Univ. of Western Australia, Perth, Australia.
Chen, W. F. (2007). Limit analysis and soil plasticity, J. Ross, Plantation, FL.
Chen, W. F., and Liu, X. L. (1990). Limit analysis in soil mechanics, Elsevier, Amsterdam, Netherlands.
Chen, W. F., and Snitbhan, N. (1975). “On slip surface and slope stability analysis.” Soils Found., 15(3), 41–49.
Cheuk, C. Y., White, D. J., and Dingle, H. R. C. (2008). “Upper-bound plasticity analysis of a partially-embedded pipe under combined vertical and horizontal loading.” Soils Found., 48(1), 133–140.
Coop, M. R., Sorensen, K. K., Bodas Freitas, T., and Georgoutsos, G. (2004). “Particle breakage during shearing of a carbonate sand.” Géotechnique, 54(3), 157–163.
Desai, C. S. (2001). Mechanics of materials and interfaces—The disturbed sate concept, CRC, Boca Raton, FL.
Dingle, H. R. C., White, D. J., and Gaudin, C. (2008). “Mechanism of pipe embedment and lateral breakout on soft clay.” Can. Geotech. J., 45(5), 636–652.
DNV (Det Norske Veritas). (2010). “On-bottom stability design of submarine pipelines.” Recommended Practice DNV-RP-F109, Høvik, Norway.
Karal, K. (1977). “Lateral stability of submarine pipelines,” Offshore Technology Conf., Paper 2967, Society of Petroleum Engineers, Richardson, TX.
Liu, X. L., Wang, Q. Y., and Chen, W. F. (1989). “Layered analysis with generalized failure criterion.” Comput. Struct., 33(4), 1117–1123.
Martin, C. M. (2011). “The use of adaptive finite-element limit analysis to reveal slip-line fields.” Géotech. Lett., 1(2), 23–29.
MATLAB [Computer software]. MathWorks, Natick, MA.
McCarron, W. O. (2015). “Subsea flowline buckle capacity considering uncertainty in pipe-soil interaction.” Comput. Geotech., 68, 17–27.
McCarron, W. O. (2016). “Limit analysis and finite element evaluation of pipe-soil interaction resistance.” Can. Geotech. J., 53(1), 14–21.
Najjar, S. S., Gilbert, R. B., Liedtke, E., McCarron, B., and Young, A. G. (2007). “Residual shear strength for interfaces between pipelines and clays at low effective normal stresses.” J. Geotech. Geoenviron. Eng., 695–706.
Seongwan, B. (2009). “Drained residual shear and interface strength of soils at low effective normal stress.” M.S. thesis, Univ. of Texas at Austin, Austin, TX.
Tian, Y., and Cassidy, M. J. (2011). “Pipe-soil interaction model incorporating large displacements in calcareous sand.” J. Geotech. Geoenviron. Eng., 279–287.
Verley, R. L. P., and Sotberg, T. (1994). “A soil resistance model for pipelines placed on sandy soils.” J. Offshore Mech. Arct. Eng., 116(3), 145–153.
White, D. J. (2010). “Pipe-soil interaction models for lateral buckling design.” Phase IIa data review—Sandy soils, Centre for Offshore Foundation Systems, Geomechanics Group, Univ. of Western Australia, Perth, Australia.
Youssef, B., and Cassidy, M. J. (2014). “Calibration of Verley and Sotberg soil resistance model for pipelines placed on calcareous soils.” Proc., 24th Int. Ocean and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Cupertino, CA.
Zhang, J., Stewart, D. P., and Randolph, M. F. (2002). “Modeling of shallowly embedded offshore pipelines in calcareous sand.” J. Geotech. Geoenviron. Eng., 363–371.
Zhang, X. J., and Chen, W. F. (1987). “Stability analysis of slopes with general nonlinear failure criterion.” Int. J Numer. Anal. Methods Geomech., 11:33–50.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Jun 27, 2016
Accepted: Mar 13, 2017
Published online: Jun 5, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 5, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.