Discrete Element Simulations of Shallow Plate-Load Tests
Publication: International Journal of Geomechanics
Volume 16, Issue 3
Abstract
Shallow plate-load tests were simulated using a two-dimensional discrete element procedure together with parameters calibrated from a series of biaxial compression experiments on aluminum rods. The deformation and force transmission characteristics within ground materials were investigated first, and then attentions were focused on studying the influences of the interparticle friction coefficient, the roughness of the loading plate, and the size of loading plate on the testing results, including the ultimate bearing capacity, the deformation behavior, and the failure mode. The well-known scale effect in plate-load tests was also analyzed from the perspectives of both continuum mechanics and discrete element method simulations. It was proven that the nonlinear strength behavior of the materials beneath the foundation is a possible source of the scale effect; however, this effect may be counterbalanced by the boundary restriction effect in laboratory experiments.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by National Natural Science Foundation of China (NSFC, Grant Numbers 91215301, 51209141, and 51379130). The financial support from Nanjing Hydraulic Research Institute (NHRI, Grant Number Y314011) is also greatly appreciated.
References
ASTM. (2003). “Standard test method for bearing capacity of soil for static load and spread footings.” D 1194-94, Philadelphia.
Bhandari, A., and Han, J. (2009). “DEM study of a shallow foundation under vertical loading.” 2009 International Foundation Congress and Equipment Exposition, Contemporary Topics in Ground Modification, Problem Soils and Geo-Support, ASCE, Reston, VA, 465–472.
Cerato, A. B., and Lutenegger, A. J. (2006). “Bearing capacity of square and circular footings on a finite layer of granular soil underlain by a rigid base.” J. Geotech. Geoenviron. Eng., 1496–1501.
Cerato, A. B., and Lutenegger, A. J. (2007). “Scale effects of shallow foundation bearing capacity on granular material.” J. Geotech. Geoenviron. Eng., 1192–1202.
Chen, W. F., and Liu, X. L. (1990). Limit analysis in soil mechanics. Elsevier, Amsterdam, Netherlands.
Chen, Z. Y., and Morgenstern, N. R. (1983). “Extensions to generalized method of slices for stability analysis.” Can. Geotech J., 20(1), 104–109.
Chopra, A. K. (2009). Dynamics of structures theory and application to earthquake engineering, 3rd Ed., Tsinghua University Press, Beijing.
Consoli, N. C., Rosa, F. D., and Fonini, A. (2009). “Plate load tests on cemented soil layers overlaying weaker soil.” J. Geotech. Geoenviron. Eng., 1846–1857.
Consoli, N. C., Schnaid, F., and Milititsky, J. (1998). “Interpretation of plate load tests on residual soil site.” J. Geotech. Geoenviron. Eng., 857–867.
Costa, Y. D., Cintra, J. C., and Zornberg, J. G. (2003). “Influence of matric suction on the results of plate load tests performed on a lateritic soil deposit.” Geotech. Test. J., 26(2), 219–226.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
De Beer, E. E. (1965). “Bearing capacity and settlement of shallow foundations on sand.” Proc., Symp. on Bearing Capacity and Settlements of Foundations, Duke Univ., Durham, NC, 15–33.
Delenne, J.-Y., Youssoufi, M. S. E., Cherblanc, F., and Bénet, J.-C. (2004). “Mechanical behaviour and failure of cohesive granular materials.” Int. J. Numer. Anal. Methods Geomech., 28(5), 1577–1594.
Fu, Z. Z., Chen, S. S., and Wang, T. B. (2014). “Discrete element simulation program for earth and rockfill structures (DEAPERS) theory and manual.” Research Rep. Soil 51379130, Nanjing Hydraulic Research Institute, Nanjing, China.
Fu, Z. Z., and Huo, J. P. (2013). “Utilization of the overburden gravel layer in Tongguankou concrete faced rockfill dam engineering.” Research Rep. Soil 2013040, Nanjing Hydraulic Research Institute, Nanjing, China.
Fu, Z. Z., Liu, S. H., and Li, Z. (2011). “Discrete element simulations of two wetting effects on granular materials.” Chin. Sci. Bull., 56(35), 3803–3811.
Herle, I., and Tejchman, J. (1997). “Effect of grain size and pressure level on bearing capacity of footings on sand.” Proc., Int. Symp. on Deformation and Progressive Failure in Geomechanics. Elsevier Science Japan, Tokyo, 781–786.
Hermanns, M. (2002). “Parallel programming in Fortran 95 using OpenMP.” 〈http://www.openmp.org/presentations/miguel/F95_OpenMPv1_v2.pdf〉 (May 30, 2015).
Hettler, A., and Gudehus, G. (1988). “Influence of the foundation width on the bearing capacity factor.” Soils Found., 28(4), 81–92.
Hisham, T. E. (2013). “Bearing capacity and settlement of skirted shallow foundations on sand.” Int. J. Geomech., 645–652.
Itasca Consulting Group (1999). PFC3D particle flow code in three dimensions, Version 2.00. Minneapolis.
Jiang, X. Q. (2009). “Study on micro-fabric mechanism of soil mailing.” Master’s thesis, 0630202030, Institute of Hydraulic Structures, Hohai Univ., Nanjing, China.
Kumar, J. (2003). “Nγ for rough strip footing using the method of characteristics.” Can. Geotech. J., 40(3), 669–674.
Kumar, J. (2004). “Effect of footing–soil interface friction on bearing capacity factor Nγ.” Géotechnique, 54(10), 677–680.
Kumar, J. (2009). “The variation of Nγ with footing roughness using the method of characteristics.” Int. J. Numer. Anal. Methods Geomech., 33(2), 275–284.
Liu, S. H., and Sun, D. A. (2002). “Simulating the collapse of unsaturated soil by DEM.” Int. J. Numer. Anal. Methods Geomech., 26(6), 633–646.
Liu, S. H., Wang, Z. J., Wang, Y. S., Wang, L., and Fu, Z. (2015). “A yield function for granular materials based on microstructures.” Eng. Comp., 32(4), 1006–1024.
Liu, S. H., Yao, Y. P., and Sun, Q. C. (2009). “Microscopic study on stress-strain relation of granular materials.” Chin. Sci. Bull., 54(23), 4349–4357.
Loukidis, D., and Salgado, R. (2011). “Effect of relative density and stress level on the bearing capacity of footings on sand.” Géotechnique, 61(2), 107–119.
Matsuoka, H., and Liu, H. (2005). A new earth reinforcement method using soilbags. Taylor & Francis, Delft, Netherlands.
Meyerhof, G. G. (1955). “Influence of roughness of base and ground-water conditions on the ultimate bearing capacity of foundations.” Géotechnique, 5(3), 227–242.
Oh, W. T., and Vanapalli, S. K. (2013). “Scale effect of plate load tests in unsaturated soils.” Int. J. Geomater., 4(2), 585–594.
Sanchez, J., Auvinet, G., and Cambou, B. (2015). “Coordination number and geometric anisotropy in binary sphere mixtures.” Geomechanics from Micro to Macro, Taylor & Francis, London, 225–230.
Shiraishi, S. (1990). “Variation in bearing capacity factors of dense sand assessed by model loading tests.” Soils Found., 30(1), 17–26.
Sloan, S. W. (2013). “Geotechnical stability analysis.” Géotechnique, 63(7), 531–572.
Smith, G. N., and Smith, I. G. N. (1998). Elements of soil mechanics, 7th Ed., Blackwell Science, Oxford, U.K.
Sun, Q. C., and Wang, G. Q. (2009). Introduction to mechanics of granular materials, Science Press, Beijing.
Tatsuoka, F., Okahara, M., Tanaka, T, Yang, J.-J., and Liu, F. (1991). “Progressive failure and particle size effect in bearing capacity of a footing on sand.” Geotech. Sepc. Publ., 27(2), 788–802.
Terzaghi, K. (1943). Theoretical soil mechanics, John Wiley & Sons, New York.
Ueno, K., Miura, K., Kusakabe, O., and Nishimura, M. (2001). “Reappraisal of size effect of bearing capacity from plastic solution.” J. Geotech. Geoenviron. Eng., 275–281.
Veiskarami, M., Kumar, J., and Valikhah, F. (2014). “Effect of the flow rule on the bearing capacity of strip foundations on sand by the upper-bound limit analysis and slip lines.” Int. J. Geomech.,.
Yamaguchi, H., Kimura, T., and Fuji, N. (1976). “On the influence of progressive failure on the bearing capacity of shallow foundations in dense sand.” Soils Found., 16(4), 11–22.
Zhang, L., and Thornton, C. (2007). “A numerical examination of the direct shear test.” Géotechnique, 57(4), 343–354.
Zhu, F., Clark, J. I., and Phillips, R. (2001). “Scale effect of strip and circular footings resting on dense sand.” J. Geotech. Geoenviron. Eng., 613–621.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 7, 2014
Accepted: Jul 15, 2015
Published online: Jan 5, 2016
Published in print: Jun 1, 2016
Discussion open until: Jun 5, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.