Technical Paper
Jan 28, 2016

Load-Displacement and Moment-Rotation Responses of Foundations Subjected to Moment Loading

Publication: International Journal of Geomechanics
Volume 16, Issue 5

Abstract

This study investigated the response of rigid surface foundations to moment loading based on nonlinear (hyperbolic) soil response. The response of a rectangular foundation on the surface of the ground was modeled as a nonlinear Winkler model. The nonlinear Winkler-based shallow foundation model was evaluated for its dependence on eccentricity of load, subgrade properties, etc. The key subgrade properties on which the proposed nonlinear model depends are the initial tangent subgrade modulus and ultimate bearing stress of the soil. The model was validated by comparing the predicted response of stress versus normalized displacement based on relevant soil properties with the response from the published data of field footing load tests. A parametric study quantified the effects of different parameters on the stress-displacement and moment-rotation responses of the foundation. The proposed analysis captured the inherent nonlinear deformations of the soil and the coupled nature of displacements and rotations of foundations subjected to eccentric loading. The predicted displacements compared well with the measured values.

Get full access to this article

View all available purchase options and get full access to this article.

References

Borowicka, H. (1943). “About eccentrically loaded, rigid plates on elastic sotropic building.” Eng. Arch., 14:1–8 (in German).
Briaud, J. L., and Gibbens, R. (1994). “Test and prediction results for five large spread footings on sand.” FHWA Prediction Symp., Geotechnical Special Publication 41, New York, 92–128.
Briaud, J. L., and Jeanjean, P. (1994). “Load settlement curve method for footings on sand.” ASCE Specialty Conf. “Settlement 94,” Vol. 2, Texas A&M Univ., College Station, TX, 1774–1804.
Brinkgreve, R. B. J. (2005). “Selection of soil models and parameters for geotechnical engineering application.” Geotechnical special publication 128, Yamamuro, J. A. and Kaliakin, V. N. eds., ASCE, Reston, VA, 69–98.
Brinkgreve, R. B. J., and Vermeer, P. A. (1997). Plaxis: Finite element code for soil and rock analyses: Version 7. Balkema, Rotterdam, the Netherlands.
Chen, C. F. (1985). Mechanics of geomaterials, Z. Bazant, ed., John Wiley & Sons Ltd., Chicago, 65–86.
Colasanti, R. J., and Horvath, J. S. (2010). “A practical subgrade model for improved soil–structure interaction analysis: Software implementation.” Pract. Period. Struct. Des. Constr., 278–286.
Duncan, J. M., and Chang, C.-Y. (1970). “Nonlinear analysis of stress and strain in soils.” J. Soil Mech. Found. Div., 96(5), 1629–1653.
Egorov, K. E., Kitaikina, O. V., and Zinovyev, A. V. (1979). “Deformation of ring foundation base.” Proc., 6th Asian Regional Conf., SMFE, Singapore, 281–284.
Georgiadis, M., and Butterfield, R. (1987). “Displacements of footings on sand under eccentric and inclined loads.” Can. Geotech. J., 25(2), 199–212.
Horvath, J. S., and Colasanti, R. J. (2009). “Practical subgrade model for improved soil structure interaction analysis: Model development.” Int. J. Geomech., 30–36.
Kondner, R. L. (1963). “Hyperbolic stress–strain response: Cohesive soils.” J. Soil Mech. Found. Div., 89(1), 115–143.
Lee, I. K. (1962). “Bearing capacity of foundations with particular reference to Melbourne area.” J. Inst. Eng. Aust., 34, 283–291.
Mahiyar, H., and Patel, A. N. (2000). “Analysis of angle shaped footing under eccentric loading.” J. Geotech. Geoenviron. Eng., 1151–1156.
Meyerhof, G. G. (1953). “The bearing capacity of footings under eccentric and inclined loads.” Proc., 3rd Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 1, ICOSOMEF, Zurich, Switzerland, 440–445.
Noorzaei, J., Viladkar, M. N., and Godbole, P. N. (1994). “Nonlinear soil–structure interaction in plane frames.” J. Comp. Inf. Sci. Eng., 11(4), 303–316.
Nova, R., and Montrasio, L. (1991). “Settlements of shallow foundations on sand.” Géotechnique, 41(2), 243–256.
Nova, R., and Montrasio, L. (1997). “Settlements of shallow foundations on sand: Geometrical effects.” Géotechnique, 47(1), 46–60.
Pardo, J., and Bobet, A. (2007). “Behavior of rigid footings on gravel under axial load and moment.” J. Geotech. Geoenviron. Eng., 1203–1215.
Parry, R. H. G. (1971). “A direct method of estimating settlements in sand for SPT values.” Proc., Symp. on the Interaction of Structure and Foundation, Midland Soil Mechanics and Foundations Engineering Society, Birmingham, AL, 29–32.
Prakash, S., and Saran, S. (1971). “Bearing capacity of eccentrically loaded footings.” J. Soil Mech. Found. Div., 97(1), 95–118.
Purkayastha, R. D., and Char, R. A. (1977). “Stability analysis for eccentrically loaded footings.” J. Geotech. Eng., 103(6), 647–651.
Ramlot, C., and Vandeperre, L. (1950). “Electric pylons of foundations: Their resistance to overturning their stability, their calculation.” Research Rep. 2, IRSIA, France (in French).
Schanz, T. (1998). “For modeling of the mechanical behavior of friction materials. Habilitation.” Doctoral dissertation, Univ. of Stuttgart, Stuttgart, Germany (in German).
Schmertmann, J. H. (1970). “Static cone to compute static settlement over sand.” J. Soil Mech. Found. Div., 96(3), 1011–1043.
Scott, R. F. (1981). Foundation analysis, Prentice Hall, Englewood Cliffs, NJ.
Smith-Pardo, J., and Bobet, A. (2007). “Behavior of rigid footings on gravel under axial load and moment.” J. Geotech. Geoenviron. Eng., 1203–1215.
Veletos, A. S., and Verbic, B. (1974). “Basic response functions for elastic foundations.” J. Eng. Mech., 100(2), 189–202.
Weismann, G. F. (1972). “Tilting foundations.” J. Soil Mech. Found. Div., 98(1), 59–78.

Information & Authors

Information

Published In

Go to International Journal of Geomechanics
International Journal of Geomechanics
Volume 16Issue 5October 2016

History

Received: May 6, 2014
Accepted: Jun 2, 2015
Published online: Jan 28, 2016
Discussion open until: Jun 28, 2016
Published in print: Oct 1, 2016

Permissions

Request permissions for this article.

Authors

Affiliations

M. Padmavathi [email protected]
Assistant Professor, Dept. of Civil Engineering, JNTUH College of Engineering, JNT Univ., Hyderabad 500085, India (corresponding author). E-mail: [email protected]
V. Padmavathi [email protected]
Associate Professor, Dept. of Civil Engineering, JNTUH College of Engineering, JNT Univ., Hyderabad 500085, India. E-mail: [email protected]
M. R. Madhav [email protected]
Professor Emeritus, Dept. of Civil Engineering, JNTUH College of Engineering, JNT Univ., Hyderabad 500085, India. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share