Soil-Structure Interaction of Very Flexible Pipes: Centrifuge and Numerical Investigations
Publication: International Journal of Geomechanics
Volume 15, Issue 6
Abstract
The unprecedented increasing cost of steel coupled with the superior mechanical and anticorrosion properties of fiber-reinforced plastic (FRP) creates a huge opportunity for FRP pipes to take the market share of steel and be the pipe of choice for geotechnical engineers for a variety of applications ranging from potable-water systems to feed lines and penstock for hydroelectric power plants. Recently, very flexible large-diameter FRP pipes have been installed in eastern Canada and the United States to replace old wood-stave pipes to convey water to drive the turbines of small hydroelectric plants. The behavior of buried very flexible pipes is one of the complex soil-structure interaction (SSI) problems in geotechnical engineering and has not been studied thoroughly until now. The flexibility classification of pipes is determined based on their effective stiffness. Accordingly, flexible pipes will have an effective flexibility of or less. In this paper, the results of centrifuge modeling of fully buried very flexible pipes with shallow soil cover with and without surface loading are presented to supplement the very limited data that exist for such very flexible pipes. In addition, a three-dimensional finite-element (FE) model was created as part of this study to simulate the centrifuge results obtained and to investigate the effect of surface loading on the buried pipes. In addition, the results from the model testing and the FE model were compared with the predictions of two analytical solutions to assess their suitability for such an application. Finally, the positive arching predicted by the analytical methods and its practical significance were examined.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abolmaali, A., and Kararam, A. (2013). “Nonlinear finite-element modeling analysis of soil-pipe interaction.” Int. J. Geomech., 197–204.
Bolton, M. D., and Powrie, W. (1987). “The collapse of diaphragm walls with retaining clay.” Géotechnique, 37(3), 335–363.
Britto, A. M. (1979). “Thin-walled buried pipes.” Ph.D. thesis, Cambridge Univ., Cambridge, U.K.
Bryden, P. J. (1993). “Centrifuge modelling of flexible buried pipes.” M.Sc. thesis, Univ. of New Brunswick, Fredericton, NB, Canada.
Cameron, D. A. (2005). “Analysis of buried flexible pipes in granular backfill subjected to construction traffic.” Ph.D. thesis, Univ. of Sydney, Sydney, Australia.
Craig, W. H., and Mokrani, A. (1988). “Effect of static line and rolling axle loads on flexible culverts buried in granular soil.” Proc., Centrifuge ’88 Conf., J.-F. Corte, ed., Balkema, Rotterdam, Netherlands, 385–394.
Dezfooli, M. S., Abolmaali, A., and Razavi, M. (2014). “Coupled nonlinear finite-element analysis of soil–steel pipe structure interaction.” Int. J. Geomech., 04014032.
Duncan, J. M., and Chang, C.-Y. (1970). “Nonlinear analysis of stress and strain in soils.” J. Soil Mech. and Found. Div., 96(5), 1629–1653.
Gumbel, J. E. (1983). “Analysis and design of buried flexible pipes.” Ph.D. thesis, Univ. of Surrey, Guildford, Surrey, U.K.
Javanmard, M. (1994). “Soil-structure interaction of fully and partially buried flexible pipes.” Ph.D. thesis, Univ. of New Brunswick, Fredericton, NB, Canada.
Javanmard, M., and Valsangkar, A. J. (1994). “Soil-structure interaction of partially buried flexible pipes.” Proc., Int. Conf. Centrifuge ’94, Balkema, Rotterdam, Netherlands, 733–738.
McAffee, R. P., and Valsangkar, A. J. (2008). “Field performance, centrifuge testing, and numerical modelling of an induced trench installation.” Can. Geotech. J., 45(1), 85–101.
McGuigan, B. L., and Valsangkar, A. J. (2010). “Centrifuge testing and numerical modeling of box culverts installed in induced trench.” Can. Geotech. J., 47(2), 147–163.
McVay, M., and Pappadopoulos, P. (1986). “Long-term behavior of buried large-span culverts.” J. Geotech. Engrg., 424–442.
McVay, M. C. (1982). “Evaluations of numerical modelling of buried conduits.” Ph.D. thesis, Univ. of Massachusetts, Amherst, MA.
McVay, M. C., Pappadopoulos, P., and Bloomquist, D. (1993). “Long-term behavior of large-span culverts in cohesive soils.” Transportation Research Record 1414, Transportation Research Board, Washington, DC, 40–46.
Oshati, O. S., Valsangkar, A. J., and Schriver, A. B. (2012a). “Earth pressures exerted on an induced trench cast-in-place double-cell rectangular box culvert.” Can. Geotech. J., 49(11), 1267–1284.
Oshati, O. S., Valsangkar, A. J., and Schriver, A. B. (2012b). “Performance of two cast-in-place culverts under high embankments.” Can. Geotech. J., 49(12), 1331–1346.
Palmer, A. C., et al. (2003). “Uplift resistance of buried submarine pipelines: Comparison between centrifuge modelling and full-scale.” Géotechnique, 53(10), 877–883.
PLAXIS 3D 2012 [Computer software]. Delft, Netherlands, Plaxis bv.
Schanz, T., Vermeer, P. A., and Bonnier, P. G. (1999). “The hardening soil model: Formulation and verification.” Proc., Beyond 2000 in Computational Geotechnics, R. B. J. Brinkgreve, ed., Balkema, Rotterdam, Netherlands, 281–290.
Stone, K. J. L., Hensley, P. J., and Taylor, R. N. (1991). “A centrifuge study of rectangular box culverts.” Proc., Int. Conf. Centrifuge ’91, H.-Y. Ko and F. G. McLean, eds., Balkema, Rotterdam, Netherlands, 107–112.
Tian, Y., and Cassidy, M. J. (2008). “Modeling of pipe–soil interaction and its application in numerical simulation.” Int. J. Geomech., 213–229.
Tohda, J. H., Yoshimura, K., and Seki, H. (1991). “Centrifuge model tests on several problems of buried pipes.” Proc., Int. Conf. Centrifuge ’91, H.-Y. Ko and F. G. McLean, eds., Balkema, Rotterdam, Netherlands, 83–90.
Valsangkar, A. J., and Britto, A. M. (1978). “The validity of ring compression theory in the design of flexible buried pipes.” Supplemental Rep. SR440, Transportation and Road Research Laboratory, Crowthorne, U.K.
Valsangkar, A. J., and Britto, A. M. (1979). “Centrifuge tests of flexible circular pipes subjected to surface loading.” Supplemental Rep. SR530, Transportation and Road Research Laboratory, Crowthorne, U.K.
Watkins, R. K. (1975). “Buried structures.” Chapter 23, Foundation engineering handbook, R. F. Winterkolrn and H. Y. Fang, eds., Van Nostrand Reinhold, New York, 709–723.
Wu, T. H., and Leonards, G. A. (1985). “Characterizations of soil arching above buried conduits.” Advances in underground pipeline engineering, J. K. Jeyapalan, ed., ASCE, New York, 396–407.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 15 • Issue 6 • December 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 16, 2014
Accepted: Jul 28, 2014
Published online: Aug 29, 2014
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.