Numerical Analysis of an Instrumented Steel-Reinforced Soil Wall
Publication: International Journal of Geomechanics
Volume 15, Issue 1
Abstract
The paper describes the results and lessons learned using a FEM model to simulate quantitative performance features of the Minnow Creek steel-strip reinforced soil wall structure located in the United States. The Minnow Creek Wall structure was constructed and instrumented in 1999. It is a unique case study because of the comprehensive measurements that were taken to record a wide range of wall performance features. Two different constitutive models for the soil were used (a linear-elastic Mohr-Coulomb model and hardening soil model with a Mohr-Coulomb failure criterion), and numerical outcomes were compared with physical measurements. The numerical results were shown to be sensitive to boundary conditions assumed at the toe of the wall. The generally encouraging agreement between physical and numerically predicted results gives confidence that commercial FEM software packages can be useful for the analysis and design of these types of structures, provided that care is taken in the selection of input parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to acknowledge the support of the Universitat Politècnica de Catalunya-Barcelona Tech (UPC) and the funding received through the research project BIA2010-20789-C04-01 by the Ministry of Education and Innovation of Spain. This funding allowed the first author to spend 6 months at the GeoEngineering Centre at Queen’s-RMC at the Royal Military College (RMC) of Canada, during which time the research work reported in this paper began. Finally, the authors are grateful to David J. Runser, who clarified a number of details regarding the Minnow Creek Wall construction.
References
AASHTO. (2004). “The classification of soils and soil aggregate mixtures for highway construction purposes.” M145, Washington, DC.
AASHTO. (2012). LRFD bridge design specifications, 6th Ed., Washington, DC.
Allen, T., Christopher, B., Elias, V., and DeMaggio, J. (2001). “Development of the simplified method for internal stability.” Rep. WA-RD 513, Washington State DOT, Olympia, WA.
Allen, T. M., Bathurst, R. J., Holtz, R. D., Lee, W. F., and Walters, D. (2004). “New method for prediction of loads in steel reinforced soil walls.” J. Geotech. Geoenviron. Eng., 1109–1120.
ASTM. (2011). “Standard practice for classification of soils for engineering purposes (unified soil classification system).” D2487, West Conshohocken, PA.
Bathurst, R. J., Allen, T. M., Miyata, Y., and Huang, B. (2013). “Lessons learned from LRFD calibration of reinforced soil wall structures.” Modern design codes of practice—Development, calibration, and experiences, P. Arnold, M. Hicks, T. Schweckendiek, B. Simpson, and G. Fenton, eds., IOS Press, Amsterdam, Netherlands, 261–276.
Bathurst, R. J., and Benjamin, D. J. (1990). “Failure of a geogrid-reinforced soil wall.” Transportation Research Record 1288, Transportation Research Board, Washington, DC, 109–116.
Bathurst, R. J., Huang, B., and Allen, T. M. (2011). “Load and resistance factor design (LRFD) calibration for steel grid reinforced soil walls.” Georisk, 5(3–4), 218–228.
Bathurst, R. J., Nernheim, A., and Allen, T. M. (2008). “Predicted and measured loads using the coherent gravity method.” Ground Improv., 161(3), 113–120.
Bathurst, R. J., Nernheim, A., and Allen, T. M. (2009). “Predicted loads in steel reinforced soil walls using the AASHTO simplified method.” J. Geotech. Geoenviron. Eng., 177–184.
Berg, R. R., Christopher, B. R., and Samtani, N. C. (2009). “Design of mechanically stabilized earth walls and reinforced soil slopes.” FHWA GEC 011, Vol. I, National Highway Institute, Federal Highway Administration, U.S. DOT, Washington, DC.
Bowles, J. E. (1996). Foundation analysis and design, 5th Ed., McGraw Hill, New York.
British Standards Institution (BSI). (2010). Code of practice for strengthened/reinforced soil and other fills, Milton Keynes, U.K.
Canadian Geotechnical Society. (2006). Canadian foundation engineering manual, 4th Ed., BiTech Publishers, Richmond, BC, Canada.
Carter, J. P., Desai, C. S., Potts, D. M., Schweiger, H. F., and Sloan, S. W. (2000). “Computing and computer modelling in geotechnical engineering.” Proc., GeoEng 2000, Int. Conf. on Geotechnical and Geological Engineering, Technomic, Lancaster, PA, 1157–1252.
Choufani, C., Wu, P., Gagnon, G., and Macintosh, M. (2011). “A precast faced mechanical stabilized earth solution for a 20 metre high mining crusher wall with various technical and site challenges.” Proc., 2011 Pan-Am Canadian Geotechnical Conf. (CD-ROM), Canadian Geotechnical Society, Richmond, BC, Canada, 625.
Damians, I. P., Bathurst, R. J., Josa, A., Lloret, A., and Albuquerque, P. J. R. (2013). “Vertical-facing loads in steel-reinforced soil walls.” J. Geotech. Geoenviron. Eng., 1419–1432.
Hatami, K., and Bathurst, R. J. (2005). “Development and verification of a numerical model for the analysis of geosynthetic-reinforced soil segmental walls under working stress conditions.” Can. Geotech. J., 42(4), 1066–1085.
Hatami, K., and Bathurst, R. J. (2006). “Numerical model for reinforced soil segmental walls under surcharge loading.” J. Geotech. Geoenviron. Eng., 673–684.
Hatami, K., Bathurst, R. J., and Di Pietro, P. (2001). “Static response of reinforced soil retaining walls with nonuniform reinforcement.” Int. J. Geomech., 477–506.
Huang, B., Bathurst, R. J., and Allen, T. M. (2012). “LRFD calibration for steel strip reinforced soil walls.” J. Geotech. Geoenviron. Eng., 922–933.
Huang, B., Bathurst, R. J., and Hatami, K. (2009). “Numerical study of reinforced soil segmental walls using three different constitutive soil models.” J. Geotech. Geoenviron. Eng., 1486–1498.
Kibria, G., Hossain, M. S., and Khan, M. S. (2014). “Influence of soil reinforcement on horizontal displacement of MSE wall.” Int. J. Geomech., 130–141.
Kim, D., and Salgado, R. (2012). “Load and resistance factors for internal stability checks of mechanically stabilized earth walls.” J. Geotech. Geoenviron. Eng., 910–921.
Kulhawy, F. H., and Mayne, P. W. (1990). “Manual on estimating soil properties for foundation design.” Rep. EL-6800, Electric Power Research Institute, Palo Alto, CA.
Lindquist, D. D. (2008). “Seismic modeling of a 135-foot-tall MSE wall.” Proc., Geotechnical Earthquake Engineering and Soil Dynamics IV, D. Zeng, M. T. Manzari, and D. R. Hiltunen, eds., ASCE, Reston, VA.
Miyata, Y., and Bathurst, R. J. (2012a). “Analysis and calibration of default steel strip pullout models used in Japan.” Soils Found., 52(3), 481–497.
Miyata, Y., and Bathurst, R. J. (2012b). “Measured and predicted loads in steel strip reinforced soil walls in Japan.” Soils Found., 52(1), 1–17.
Neely, W. J. (2005). “Calculated and measured axial loads on bearing pads in MSE retaining walls.” Proc., Western Bridge Engineer’s Seminar, Portland, OR.
Neely, W. J., and Tan, S. L. (2010). “Effects of second-order design factors on the behavior of MSE walls.” Proc., Earth Retention Conf., R. Finno, Y. M. A. Hashash, and P. Arduino, eds., ASCE, Reston, VA, 522–530.
Plaxis. (2008). Reference manual, 2D—Version 9.0, Plaxis, Delft Univ. of Technology, Delft, Netherlands 〈http://www.plaxis.nl〉 (Jun. 23, 2009).
Plaxis. (2012). Material models manual, Plaxis, Delft Univ. of Technology, Delft, Netherlands.
Public Works Research Center (PWRC). (2003). Design method, construction manual and specifications for steel strip reinforced retaining walls, 3rd Ed., Tsukuba, Ibaraki, Japan (in Japanese).
Runser, D. J. (1999). “Instrumentation and experimental evaluation of a 17 m tall reinforced earth retaining wall.” M.S. thesis, School of Civil Engineering, Purdue Univ., West Lafayette, IN.
Runser, D. J., Fox, P. J., and Bourdeau, P. L. (2001). “Field performance of a 17 m-high reinforced soil retaining wall.” Geosynthet. Int., 8(5), 367–391.
Schlosser, F. (1978). “History, current development and future developments of reinforced earth.” Proc., Symp. on Soil Reinforcing and Stabilizing Techniques, New South Wales Institute of Technology, Ultimo, Australia, and Univ. of Sydney, Sydney, Australia, 5–28 (in French).
Schlosser, F., and Elias, V. (1978). “Friction in reinforced earth.” Proc., ASCE Symp. on Earth Reinforcement, ASCE, Reston, VA, 735–763.
Schlosser, F., and Segrestin, P. (1979). “Dimensionnement des ouvrages en terre armée par la méthode de l’équilibre local (Local stability analysis method of design of reinforced earth structures).” Proc., Int. Conf. on Soil Reinforcement, Vol. 1, Association Amicale des Ingenieurs Anciens Eleves de l'Ecole Nationale des Ponts et Chaussees, Paris, 157–162 (in French).
Stuedlein, A. W., Bailey, M., Lindquist, D., Sankey, J., and Neely, W. J. (2010). “Design and performance of a 46-m-high MSE wall.” J. Geotech. Geoenviron. Eng., 786–796.
Tajiri, N., Sasaki, H., Nishimura, J., Ochiai, Y., and Dobashi, K. (1996). “Full-scale failure experiments of geotextile-reinforced soil walls with different facings.” Proc., IS-Kyushu 96, 3rd Int. Symp. on Earth Reinforcement, Balkema, Rotterdam, Netherlands, 525–530.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 16, 2013
Accepted: Feb 18, 2014
Published online: Feb 20, 2014
Published in print: Feb 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.