Bearing Capacity of Strip Footings in Cohesionless Soil Subject to Eccentric and Inclined Loads
Publication: International Journal of Geomechanics
Volume 14, Issue 3
Abstract
Lower-bound calculations based on the FEM are used to determine the bearing capacity of a strip foundation subjected to an inclined, eccentric load on cohesionless soil with varying surcharges and with friction angles of 25, 30, and 35°. The soil is assumed to be perfectly plastic following the Mohr-Coulomb failure criterion. The results are reported as graphs showing the bearing capacity as a function of the friction angle, eccentricity, inclination, and surcharge. These results have been compared, and for smaller eccentricities, except in the case of no surcharge, the lower-bound values are the greater, the discrepancy increasing with growing surcharge. Positive load inclinations have a negative effect for smaller eccentricities but may have a beneficial effect on the bearing capacity for greater eccentricities. Negative load inclinations have the opposite effect, and especially for small friction angles and great surcharges, other values are considerably greater than the lower-bound values.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bransby, F., and Yun, G. (2003). “Centrifuge investigation of the horizontal capacity of shallow footings on sand.” Proc., 13th (2003) Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Cupertino, CA.
Butterfield, R., Houlsby, G. T., and Gottardi, G. (1997). “Standardized sign convention and notation for generally loaded foundations.” Geotechnique, 47(5), 1051–1054.
European Committee for Standardization (CEN). (2004). “Geotechnical design—Part 1: General rules. Standard EN 1997—1.” Eurocode 7, Brussels, Belgium.
Gottardi, G., and Butterfield, R. (1993). “On the bearing capacity of surface footings on sand under general planar loads.” Soils Found., 33(3), 68–79.
Gourvenec, S., Govoni, L., and Gottardi, G. (2008). “An investigation of shallow foundations on sand under moment loading.” Proc., 2nd BGA Int. Conf. on Foundations, ICOF2008. M. J. Brown, M. F. Bransby, A. J. Brennan, and J. A. Knappett, eds., IHS BRE Press, Bracknell, England, 873–884.
Gourvenec, S., Randolph, M., and Kingsnorth, O. (2006). “Undrained bearing capacity of square and rectangular footings.” Int. J. Geomech., 147–157.
Griffiths, D., Fenton, G., and Manoharan, N. (2006). “Undrained bearing capacity of two-strip footings on spatially random soil.” Int. J. Geomech., 421–427.
Hansen, J. B. (1961). “A general formula for bearing capacity.” Bulletin No. 11, Danish Geotechnical Institute, Copenhagen, Denmark, 38–46.
Hansen, J. B. (1970). “A revised and extended formula for bearing capacity.” Bulletin No. 28, Danish Geotechnical Institute, Copenhagen, Denmark, 5–11.
Krabbenhoft, S., Damkilde, L., and Krabbenhoft, K. (2012). “Lower bound calculations of the bearing capacity of eccentrically loaded footings in cohesionless soil.” Can. Geotech. J., 49(3), 298–310.
Loukidis, D., Chakraborty, T., and Salgado, R. (2008). “Bearing capacity of strip footings on purely frictional soil under eccentric and inclined loads.” Can. Geotech. J., 45(6), 768–787.
Meyerhof, G. G. (1953). “The bearing capacity of foundations under eccentric and inclined loads.” Proc., 3rd Int. Conf. on Soil Mechanics and Foundation Engineering (ICSMFE), Vol. I, International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE), London, 440–445.
Meyerhof, G. G. (1963). “Some recent research on the bearing capacity of foundations.” Can. Geotech. J., I(1), 16–26.
MOSEK (2001). [Computer software]. Copenhagen, Denmark, Mosek ApS.
Reissner, H. (1924). “Zum erddruckproblem.” Proc., 1st Int. Congress of Applied Mechanics, Waltman, Delft, Netherlands, 295–311 (in German).
Vesic, A. S. (1975). “Bearing capacity of shallow foundations.” Foundation engineering handbook, H. F. Winterkorn and H.-Y. Fang, eds., Van Nostrand Reinhold, New York, 121–147.
Zadroga, B. (1994). “Bearing capacity of shallow foundations on non-cohesive soils.” J. Geotech. Eng., 1991–2008.
Zaharescu, E. (1961). “Sur le stabilité des foundations rigides.” Proc., V ICSMFE, Vol. 1, International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE), London, 867–871 (in French).
Zdravkovic, L., Ng, P. M., and Potts, D. M. (2002). “Bearing capacity of surface foundations on sand subjected to combined loading.” Numerical methods in geotechnical engineering, Philippe Mestat, ed., Presses de l’ENPC/LCPC, Paris.
Zdravković, L., Potts, D., and Jackson, C. (2003). “Numerical study of the effect of preloading on undrained bearing capacity.” Int. J. Geomech., 1–10.
Zhu, D. (2000). “The least upper-bound solutions for bearing capacity factor .” Soils Found., 40(1), 123–129.
Zhu, D. Y., Lee, C. F., and Law, K. T. (2003). “Determination of bearing capacity of shallow foundations without using superposition approximation.” Can. Geotech. J., 40(2), 450–459.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 22, 2012
Accepted: Jun 11, 2013
Published online: Jun 13, 2013
Published in print: Jun 1, 2014
Discussion open until: Aug 18, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.