Analysis of Axially Loaded Short Rigid Composite Caisson Foundation Based on Continuum Approach
Publication: International Journal of Geomechanics
Volume 13, Issue 5
Abstract
The concept of an open pipe pile with a gravel plug is used to develop a new short rigid composite caisson foundation for floodplains and lowlands. It consists of a shallow pipe or caisson, sunk to the desired depth by conventional sinking techniques; the soil within the caisson shaft is removed; and granular material is filled in and compacted to enhance the stability and load-carrying capacity. The caisson shaft is considered to be rigid, undergoes rigid body translation, and hence is analyzed as an incompressible cylinder, whereas the core inside is treated as a compressible pile. The soil displacements are calculated at the midpoints of the outer surfaces of each element and at the centers of the bases of the caisson shaft and the granular core by numerically integrating Mindlin’s solution for a vertical point load inside a semiinfinite medium. A parametric study is carried out to bring out the effects of various parameters on the load sharing, the shear stress distribution, and the settlement of the proposed foundation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The major part of the work described in this paper was made possible by a research grant from the All India Council for Technical Education (AICTE), Government of India, New Delhi. The financial support provided by AICTE is gratefully acknowledged.
References
Alamgir, M., Miura, N., Poorooshasb, H. B., and Madhav, M. R. (1996). “Deformation analysis of soft ground reinforced by columnar inclusion.” Comput. Geotech., 18(4), 267–290.
Berezantzev, V. G. (1965). “Design of deep foundations.” Proc., 5th Int. Conf. on Soil Mechanics and Foundation Engineering, International Society of Soil Mechanics and Geotechnical Engineering, London, 2, 234–237.
Black, J. A., Sivakumar, V., Madhav, M. R., and Hamill, G. A. (2007). “Reinforced stone columns in weak deposits.” J. Geotech. Geoenviron. Eng., 133(9), 1154–1161.
Chandrasekaran, V. S. (2000). Numerical and Centrifuge Modelling in Soil Structure Interaction, XXIIIrd IGS Annual Lecture, Indian Geotechnical Society, New Delhi, 1–62.
D’Appolonia, E., and Ramoualdi, J. P. (1963). “Load transfer in end bearing steel H-piles” Proc., ASCE, 89(SM2), 1–25.
Desai, I. D., and Chandrasekaran, V. S. (1985). “Axially loaded caisson foundation.” Intl. J. Struct., 5(4), 67–95.
Foye, K. C., Abou-Jaoude, G., Prezzi, M., and Salgado, R. (2009). “Resistance factors for use in load and resistance factor design of driven pipe piles in sands.” J. Geotech. Geoenviron. Eng., 135(1), 1–13.
Gourvenec, S., and Randolph, M. F. (2010). “Consolidation beneath circular skirted foundations.” Int. J. Geomech., 10(1), 22–29.
Guetif, Z., Bouassida, M., and Debats, J. M. (2007). “Improved soft clay characteristics due to stone column installation.” Comput. Geotech., 34(2), 104–111.
Han, J., and Ye, S. L. (2002). “A theoretical solution for consolidation rates of stone column-reinforced foundations accounting for smear and well resistance effects.” Int. J. Geomech., 2(2), 135–151.
Lehane, B. M., and Gavin, K. G. (2001). “Base resistance of jacked pipe piles in sands.” J. Geotech. Geoenviron. Eng., 127(6), 473–480.
Mattes, N. S. (1969). “The influence of radial displacement compatibility on pile settlements. Geotechnique, 9, 157–159.
Mindlin, R. D. (1936). “Force at a point in the interior of a semi-infinite solid.” Physics, 7(5), 195–202.
Miura, N., and Madhav, M. R. (1994). “Engineering of ground in lowlands.” Proc., Symp. Developments in Geotechnical Engg. (from Harvard to N. Delhi 1936-94), A. A. Balkema, Rotterdam, Netherlands, 6, 51–62.
Murff, J. D., Raines, R. D., and Randolph, M. F. (1990). “Soil plug behaviour of piles in sand.” Proc., 22nd Annual Offshore Technology Conf., American Institute of Mining, Matallurgical and Mining Engineering, Englewood, CO, 25–32.
Murugesan, S., and Rajagopal, K. (2006). “Geosynthetic encased stone column: Numerical evaluation.” Geotext. Geomem., 24(6), 349–358.
Murugesan, S., and Rajagopal, K. (2010). “Studies on the behavior of single and group of geosynthetic encased stone column.” J. Geotech. Geoenviron. Eng., 136(1), 129–138.
Poulos, H. G., and Davis, E. H. (1968). “The settlement behaviour of single axially loaded incompressible piles and piers.” Geotechnique, 18(3), 351–371.
Poulos, H. G., and Davis, E. H. (1981). Pile foundation analysis and design, Wiley, New York.
Randolph, M. F., Leong, E. C., and Houslby, G. T. (1991). “One dimensional analysis of soil plug in pipe piles.” Geotechnique, 41(4), 587–598.
Sales, J. A. J. (1965). “Discussion.” Proc., 6th Int. Conf on Soil Mech. and Foundation Engg. ASCE, Reston, VA, 3, 489–492.
Senders, M., and Randolph, M. F. (2009). “CPT-based method for the installation of suction caissons in sand.” J. Geotech. Geoenviron. Eng., 135(1), 14–25.
Suleiman, M. T., and White, D. (2006). “Load transfer in rammed aggregate piers.” Int. J. Geomech., 6(6), 389–398.
Watts, K. S., Johnston, D., Wood, L. A., and Sadi, A. (2000). “An instrumented trail of vibro ground treatment supporting strip foundations in a variable fill.” Geotechnique, 50(6), 699–708.
Yamamoto, N., Randolph, M. F., and Einav, I. (2008). “Simple formulas for the response of shallow foundations on compressible sands.” Int. J. Geomech., 8(4), 230–239.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Mar 3, 2010
Accepted: Oct 14, 2011
Published online: Sep 16, 2013
Published in print: Oct 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.