Application of the Modified Goodman Model in Soil Nailing
Publication: International Journal of Geomechanics
Volume 13, Issue 1
Abstract
Soil nailing is an in situ soil reinforcement technique used for enhancing the stability of slopes, retaining walls, and excavations. Nails work predominantly in tension, but may also work in bending and/or shear under certain circumstances. To accurately simulate the interaction mechanism between soil mass and nails, it is necessary to study the behavior of their contact interface. The Goodman element is one of the interface elements used extensively in geotechnical contact problems. However, larger normal stiffness values are needed in the application of the Goodman element, which often leads to larger numerical error. In this paper, the Goodman element model was modified by adding two rotational degrees of freedom. Then, a finite-element program was written based on the modified Goodman element model and was applied in analyzing a foundation pit. Compared with the actual monitoring results, it shows that the modified Goodman element model developed in this paper is reasonable and feasible.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chen, R. P., et al. (2008). “A theoretical solution for pile-supported embankments on soft soils under one-dimensional compression.” Can. Geotech. J., 45(5), 611–623.
Chu, L. M., and Yin, J. H. (2005). “A laboratory device to test the pull out behavior of soil nails.” ASTM Geotech. Test. J., 28(5), 1–15.
Chu, L. M., and Yin, J. H. (2006). “Study on soil-cement grout interface shear strength of soil nailing by direct shear box testing method.” Geomech. Geoeng., 1(4), 259–273.
Desai, C. S., and Nagaraj, B. K. (1988). “Modelling for cyclic normal and shear behaviour of interfaces.” J. Eng. Mech., 114(7), 1198–1217.
Geotechnical Engineering Office. (2008). “Guide to soil nail design and construction.” Geoguide 7, Geotechnical Engineering Office, Civil Engineering Department, Hong Kong.
Goodman, R. E., Taylor, R. L., and Brekke, T. L. (1968). “A model for the mechanics of jointed rock.” J. Soil Mech. Found. Div., 94(3), 637–659.
Jewell, R. A., and Pedley, M. J. (1992). “Analysis for soil reinforcement with bending stiffness.” J. Geotech. Eng., 118(10), 1505–1528.
Junaideen, S. M., et al. (2004). “Laboratory study of soil nail interaction in loose completely decomposed granite.” Can. Geotech. J., 41(2), 274–286.
Liew, S. S. (2005). “Soil nailing for slope strengthening.” Geotech. Eng., 1–9.
Pradhan, B., et al. (2006). “Soil-nail pullout interaction in loose fill materials.” Int. J. Geomech., 6(4), 238–247.
Su, L. J., et al. (2007). “Influence of degree of saturation on soil nail pull-out resistance in compacted completely decomposed granite fill.” Can. Geotech. J., 44(11), 1314–1328.
Yang, Y. W. (2009). “Case studies of soil nailing walls and estimation of their displacement.” Chin. J. Geotech. Eng., 31(9), 1427–1433 (in Chinese).
Yin, J. H., and Su, L. J. (2006). “An innovative laboratory box for testing nail pull-out resistance in soil.” ASTM Geotech. Test. J., 29(6), 451–461.
Yuan, J. X., et al. (2003). “New approach to limit equilibrium and reliability analysis of soil nailed walls.” Int. J. Geomech., 3(2), 145–151.
Zhang, M. J., et al. (2009). “Application of a composite soil nailing system in excavation engineering close to an expressway.” J. Beijing Univ. Technol., 35(2), 174–178 (in Chinese).
Zheng, S. H., and Kan, Z. Q. (2009). “Application of compound support technology of soil-nailing wall and sparse filling piles in a foundation excavation.” Chin. J. Underground Space Eng., 5(S2), 1704–1707 (in Chinese).
Zhou, Y. D., Cheuk, C. Y., and Tham, L. G. (2009). “An embedded bond-slip model for finite element modeling of soil-nail interaction.” Comput. Geotech., 36(6), 1090–1097.
Zhu, Z. W., Wang, X. C., and Wang, H. (2010). “The applied examples of protecting technology of the deep building foundation pit in the not-soft land area.” West-China Exploration Eng., 22(1), 3–6 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 10, 2010
Accepted: Aug 25, 2011
Published online: Aug 27, 2011
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.