Assessment of 3D Slope Stability Analysis Methods Based on 3D Simplified Janbu and Hovland Methods
Publication: International Journal of Geomechanics
Volume 12, Issue 2
Abstract
An assessment of three-dimensional slope stability analysis methods in terms of safety factors using several idealized sliding masses composed of plane sliding surfaces was made. Three-dimensional safety factors were calculated and compared for different study cases considered in this study on the basis of the exact solution methods, the Hovland method, and the 3D simplified Janbu method. Parameters investigated in this study included the effect of water pressure, horizontal seismic force, the changing gradient of a sliding surface, the changing lateral gradient of a sliding surface, and anchor force. Results showed that the Hovland method gives smaller safety factor values compared to the exact solutions, especially in cases of narrow failure width and high water pressure along sliding surfaces whereas the 3D simplified Janbu method gives the same safety factor values as the exact solutions
Get full access to this article
View all available purchase options and get full access to this article.
References
Baligh, M. M., and Azzouz, A. S. (1975). “End effects on stability of cohesive slopes.” J. Geotech. Engrg. Div.AJGEB6, 101(11), 1105–1118.
Basha, B. M., and Babu, G. L. S. (2010). “Seismic rotational displacements of gravity walls by p (I.c) seudodynamic method with curved rupture surface.” Int. J. Geomech., 10(3), 93–105.IJGNAI
Chang, M. (2002). “A 3D slope stability analysis method assuming parallel lines of intersection and differential straining of block contacts.” Can. Geotech. J.CGJOAH, 39(4), 799–811.
Chen, J., Yin, J. H., and Lee, C. F. (2004). “Rigid finite element method for upper bound limit analysis of soil slopes subjected to pore water pressure.” J. Eng. Mech., 130(8), 886–893.
Chen, Z., and Ugai, K. (2008). “Limit equilibrium and finite element analysis-A perspective of recent advances.” Proc., 10th Int. Symp. on Landslides and Engineered Slopes, Xian, China.
Chen, R., and Chameau, J. L. (1982). “Three-dimensional limit equilibrium analysis of slopes.” Geotech. J.GSMJA9, 33(1), 31–40.
Fellenius, W. (1927). “Erdstatische Berechnungen mit Reibung und Kohasion.” Ernst, Berlin (in German).
Fredlund, D. G., and Krahn, J. (1977). “Comparison of slope stability methods of analysis.” Can. Geotech. J.CGJOAH, 14(3), 429–439.
Hovland, H. J. (1977). “Three-dimensional slope stability analysis method.” J. Geotech. Engrg. Div.AJGEB6, 103(9), 971–986.
Huang, C. C., and Tsai, C. C. (2000). “New method for 3D and asymmetrical slope stability analysis.” J. Geotech. Geoenviron. Eng.JGGEFK, 126(10), 917–927.
Hunger, O., Salgado, F. M., and Byrne, P. M. (1989). “Evaluation of a three-dimensional method of slope stability analysis.” Can. Geotech. J.CGJOAH, 26(4), 679–686.
Hungr, O. (1987). “An extension of Bishop’s simplified method of slope stability analysis to three dimensions.” Geotechnique J.GSMJA9, 37(1), 113–117.
Lam, L., and Fredlund, D. G. (1993). “A general limit equilibrium model for three-dimensional slope stability analysis.” Can. Geotech. J.CGJOAH, 30(6), 905–919.
Michalowski, R. L. (2010). “Limit analysis and stability charts for 3D slope failures.” J. Geotech. Geoenviron. Eng.JGGEFK, 136(4), 583–593.
Spencer, E. (1967) “A method of analysis of the stability of embankments assuming parallel interslice forces.” Geotech. J.GSMJA9, 17(1), 11–26.
Ugai, K. (1988). “Three-dimensional slope stability analysis by slice methods.” Proc., 6th Int. Conf. on Numerical Methods in Geomechanics, A.A. Balkema, Rotterdam, The Netherlands, 1369–1374.
Wang, Y. J., and Yin, J. H. (2002). “Wedge stability analysis considering dilatancy of discontinuities.” Rock Mech. Rock Eng. J.RMFMAS, 35(2), 127–137.
Wang, Y. J., Yin, J. H., Chen, Z. Y., and Lee, C. F. (2004). “Analysis of wedge stability using different methods.” Rock Mech. Rock Eng. J.RMFMAS, 37(2), 127–150.
Wu, J. H., Ohnishi, Y., Shi, G. H., and Nishiyama, S. (2005). “Theory of three-dimensional discontinuous deformation analysis and its application to a slope toppling at Amatoribashi, Japan.” Int. J. Geomech.IJGNAI, 5(3), 179–195.
Yang, X. L., and Yin, J. H. (2004). “Slope stability analysis with nonlinear failure criterion.” J. Eng. Mech., 130(3), 267–273.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Nov 16, 2009
Accepted: Feb 9, 2011
Published online: Feb 11, 2011
Published in print: Apr 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.