Experimental Investigation and Analysis of Three Dilution Strategies in an SI Turbocharged Engine Regarding Combustion, Fuel Consumption, and Emissions
Publication: Journal of Energy Engineering
Volume 148, Issue 5
Abstract
Technologies for improving engine performance and fuel economy have proven effective and promising to reduce emissions. However, owing to the increased pressure and temperature of the mixture by the turbocharging system, one negative result is a higher risk of knocking. This is not conducive to the safety of the engine or a reduction in fuel consumption. Low-temperature combustion by a diluted mixture in the cylinder has been validated to effectively reduce the knock occurrence and emission. Because the ignition timing advances by suppressing the knock caused by the mixture dilution, the fuel economy could be improved in the spark-ignition (SI) turbocharged engines. In this study, the intake valve closing (IVC), exhaust valve closing (EVC), and exhaust gas recirculation (EGR) strategies as different dilution methods were applied to investigate their effects on combustion, emission, and fuel consumption. The experimental results showed that all these dilution methods were beneficial for decreasing the maximum burned gas temperature, thereby reducing emissions of . The external EGR showed more benefits to suppress the knocking, and thus the reduced fuel consumption compared to the inner EGR (valve overlap). The external EGR method had showed larger effects on the combustion phase and fuel economy than IVC and EVC. In addition, the difference between the IVC and EVC was small when external EGR was added.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data that support the findings of this study are available from the corresponding author upon reasonable request.
References
An, Y., M. Jaasim, V. Raman, F. E. H. Pérez, J. Sim, J. Chang, H. G. Im, and B. Johansson. 2018. “Homogeneous charge compression ignition (HCCI) and partially premixed combustion (PPC) in compression ignition engine with low octane gasoline.” Energy 158 (Sep): 181–191. https://doi.org/10.1016/j.energy.2018.06.057.
Benajes, J., S. Molina, R. Novella, and E. Belarte. 2014. “Evaluation of massive exhaust gas recirculation and Miller cycle strategies for mixing-controlled low temperature combustion in a heavy duty diesel engine.” Energy 71 (Jul): 355–366. https://doi.org/10.1016/j.energy.2014.04.083.
Bunce, M., H. Blaxill, W. Kulatilaka, and N. Jiang. 2014. The effects of turbulent jet characteristics on engine performance using a pre-chamber combustor. Warrendale, PA: SAE International. https://doi.org/10.4271/2014-01-1195.
Byttner, S., T. Rögnvaldsson, and N. Wickström. 2001. Estimation of combustion variability using in-cylinder ionization measurements. Warrendale, PA: SAE International. https://doi.org/10.4271/2001-01-3485.
De Bellis, V. 2016. “Performance optimization of a spark-ignition turbocharged VVA engine under knock limited operation.” Appl. Energy 164 (Feb): 162–174. https://doi.org/10.1016/j.apenergy.2015.11.097.
Dong, D., Y. Moriyoshi, and T. Kuboyama. 2021. “Effect of porous material as heat storage medium on fuel consumption in a turbocharged gasoline engine.” Int. J. Engine Res. 22 (5): 1551–1564. https://doi.org/10.1177/1468087420910591.
Galindo, J., H. Climent, R. Navarro, and G. García-Olivas. 2021. “Assessment of the numerical and experimental methodology to predict EGR cylinder-to-cylinder dispersion and pollutant emissions.” Int. J. Engine Res. 22 (10): 3128–3146. https://doi.org/10.1177/1468087420972544.
Gonca, G., B. Sahin, A. Parlak, Y. Ust, V. Ayhan, I. Cesur, and B. Boru. 2015. “Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters.” Appl. Energy 138 (Jan): 11–20. https://doi.org/10.1016/j.apenergy.2014.10.043.
Gong, C., Z. Li, J. Sun, and F. Liu. 2020a. “Evaluation on combustion and lean-burn limit of a medium compression ratio hydrogen/methanol dual-injection spark-ignition engine under methanol late-injection.” Appl. Energy 277 (Nov): 115622. https://doi.org/10.1016/j.apenergy.2020.115622.
Gong, C., Z. Li, L. Yi, and F. Liu. 2019. “Comparative study on combustion and emissions between methanol port-injection engine and methanol direct-injection engine with H2-enriched port-injection under lean-burn conditions.” Energy Convers. Manage. 200 (Nov): 112096. https://doi.org/10.1016/j.enconman.2019.112096.
Gong, C., L. Yi, Z. Zhang, J. Sun, and F. Liu. 2020b. “Assessment of ultra-lean burn characteristics for a stratified-charge direct-injection spark-ignition methanol engine under different high compression ratios.” Appl. Energy 261 (Mar): 114478. https://doi.org/10.1016/j.apenergy.2019.114478.
Hoepke, B., S. Jannsen, E. Kasseris, and W. Cheng. 2012. “EGR effects on boosted SI engine operation and knock integral correlation.” SAE Int. J. Engines 5 (2): 547–559. https://doi.org/10.4271/2012-01-0707.
Hu, E., Z. Huang, B. Liu, J. Zheng, and X. Gu. 2009. “Experimental study on combustion characteristics of a spark-ignition engine fueled with natural gas–hydrogen blends combining with EGR.” Int. J. Hydrogen Energy 34 (2): 1035–1044. https://doi.org/10.1016/j.ijhydene.2008.11.030.
Ibrahim, A., and S. Bari. 2008. “Optimization of a natural gas SI engine employing EGR strategy using a two-zone combustion model.” Fuel 87 (10–11): 1824–1834. https://doi.org/10.1016/j.fuel.2007.10.004.
Idicheria, C. A., and L. M. Pickett. 2011. “Ignition, soot formation, and end-of-combustion transients in diesel combustion under high-EGR conditions.” Int. J. Engine Res. 12 (4): 376–392. https://doi.org/10.1177/1468087411399505.
Kalghatgi, G. 2018. “Knock onset, knock intensity, superknock and preignition in spark ignition engines.” Int. J. Engine Res. 19 (1): 7–20. https://doi.org/10.1177/1468087417736430.
Kalghatgi, G., I. Algunaibet, and K. Morganti. 2017. “On knock intensity and superknock in SI engines.” SAE Int. J. Engines 10 (3): 1051–1063. https://doi.org/10.4271/2017-01-0689.
Kosmadakis, G. M., D. C. Rakopoulos, and C. D. Rakopoulos. 2016. “Methane/hydrogen fueling a spark-ignition engine for studying NO, CO and HC emissions with a research CFD code.” Fuel 185 (Dec): 903–915. https://doi.org/10.1016/j.fuel.2016.08.040.
Kosmadakis, G. M., D. C. Rakopoulos, and C. D. Rakopoulos. 2019. “Performance and emissions of a methane-fueled spark-ignition engine under consideration of its cyclic variability by using a computational fluid dynamics code.” Fuel 258 (Dec): 116154. https://doi.org/10.1016/j.fuel.2019.116154.
Kyritsis, D. C., C. D. Rakopoulos, and D. C. Rakopoulos. 2019. “Engine and power plant combustion technologies for sustainability.” J. Energy Eng. 145 (5): 02019001. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000614.
Ladommatos, N., S. Abdelhalim, and H. Zhao. 2000. “The effects of exhaust gas recirculation on diesel combustion and emissions.” Int. J. Engine Res. 1 (1): 107–126. https://doi.org/10.1243/1468087001545290.
Liu, F., Z. Liu, Z. Sang, X. He, F. Liu, C. Liu, and Y. Xu. 2021. “A numerical and comparative study of the laminar combustion characteristics and kinetics of dimethyl ether and ethanol flames at elevated temperature.” Fuel 284 (Jan): 118934. https://doi.org/10.1016/j.fuel.2020.118934.
Metghalchi, M., and J. C. Keck. 1982. “Burning velocities of mixtures of air with methanol, isooctane, and indolene at high pressure and temperature.” Combust. Flame 48 (Aug): 191–210. https://doi.org/10.1016/0010-2180(82)90127-4.
Mitsubishi. 2012. “Mitsubishi innovative valve timing electronic control system.” Accessed August 5, 2005. https://www.mitsubishimotors.com/en/innovation/technology/library/mivec.html.
Modiyani, R., L. Kocher, D. G. Van Alstine, E. Koeberlein, K. Stricker, P. Meckl, and G. Shaver. 2011. “Effect of intake valve closure modulation on effective compression ratio and gas exchange in turbocharged multi-cylinder engines utilizing EGR.” Int. J. Engine Res. 12 (6): 617–631. https://doi.org/10.1177/1468087411415180.
Moriyoshi, Y., and T. Kuboyama. 2012. “Recent progress in HCCI combustion for a practical usage as a gasoline engine.” J. Autom. Saf. Energy 3 (2): 105–115. https://doi.org/10.3969/j.issn.1674-8484.2012.02.002.
Nande, A., S. Szwaja, and J. Naber. 2008. Impact of EGR on combustion processes in a hydrogen fuelled SI engine. Warrendale, PA: SAE International. https://doi.org/10.4271/2008-01-1039.
Olesky, L. M., J. B. Martz, G. A. Lavoie, J. Vavra, D. N. Assanis, and A. Babajimopoulos. 2013. “The effects of spark timing, unburned gas temperature, and negative valve overlap on the rates of stoichiometric spark assisted compression ignition combustion.” Appl. Energy 105 (May): 407–417. https://doi.org/10.1016/j.apenergy.2013.01.038.
Park, C., S. Kim, H. Kim, and Y. Moriyoshi. 2012. “Stratified lean combustion characteristics of a spray-guided combustion system in a gasoline direct injection engine.” Energy 41 (1): 401–407. https://doi.org/10.1016/j.energy.2012.02.060.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, and G. M. Kosmadakis. 2021. “Numerical and experimental study by quasi-dimensional modeling of combustion and emissions in variable compression ratio high-speed spark-ignition engine.” J. Energy Eng. 147 (5): 04021032. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000780.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, and R. G. Papagiannakis. 2018. “Evaluating oxygenated fuel’s influence on combustion and emissions in diesel engines using a two-zone combustion model.” J. Energy Eng. 144 (4): 04018046. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000556.
Rodrigues Filho, F. A., T. A. A. Moreira, R. M. Valle, J. G. C. Baêta, M. Pontoppidan, and A. F. Teixeira. 2016. “E25 stratified torch ignition engine performance, emission and combustion analysis.” Energy Convers. Manage. 115 (May): 299–307. https://doi.org/10.1016/j.enconman.2016.02.052.
Roh, H. G., S. Park, and C. S. Lee. 2018. “Effect of exhaust gas recirculation on the combustion and emissions of dimethyl ether in a passenger vehicle diesel engine.” J. Energy Eng. 144 (5): 04018061. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000575.
Samuel, S., D. Morrey, I. Whelan, and A. Hassaneen. 2010. Combustion characteristics and cycle-by-cycle variation in a turbocharged-intercooled gasoline direct-injected engine. Warrendale, PA: SAE International. https://doi.org/10.4271/2010-01-0348.
Sandquist, H., J. Wallesten, K. Enwald, and S. Strömberg. 1997. Influence of valve overlap strategies on residual gas fraction and combustion in a spark-ignition engine at idle. Warrendale, PA: SAE International. https://doi.org/10.4271/972936.
Schechter, M., and M. Levin. 1996. Camless engine. Warrendale, PA: SAE International. https://doi.org/10.4271/960581.
Takashi, H., and T. Kimitoshi. 2006. “Laminar flame speeds of ethanol, n-heptane, iso-octane air mixtures.” Accessed August 1, 2011. http://citeseerx.ist.psu.edu/viewdoc/citations?.
Wei, H., T. Zhu, G. Shu, L. Tan, and Y. Wang. 2012. “Gasoline engine exhaust gas recirculation—A review.” Appl. Energy 99 (Nov): 534–544. https://doi.org/10.1016/j.apenergy.2012.05.011.
Wu, C., Y. Wang, H. Sang, H. Huang, Q. Wang, and M. Pan. 2021. “Potential of di-n-butyl ether as an alternative fuel for compression ignition engines with different EGR rates and injection pressure.” J. Energy Eng. 147 (6): 04021042. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000790.
Zhao, L., and D. Wang. 2020. “Combined effects of a biobutanol/ethanol–gasoline (E10) blend and exhaust gas recirculation on performance and pollutant emissions.” ACS Omega 5 (7): 3250–3257. https://doi.org/10.1021/acsomega.9b03303.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 24, 2021
Accepted: Mar 1, 2022
Published online: Jul 1, 2022
Published in print: Oct 1, 2022
Discussion open until: Dec 1, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.