Improved Lignite Predrying System Integrated with Heat and Water Recovery from Wet Flue Gas at Lignite-Fired Power Plants: Energy and Water Conservation
Publication: Journal of Energy Engineering
Volume 148, Issue 1
Abstract
To improve energy efficiency and reduce water consumption simultaneously in lignite-fired power plants, an improved lignite predrying system integrated with heat and water recovery from wet flue gas is proposed in this study. In the proposed system, the heat source for the lignite predrying system was the latent heat from the flue gas instead of the extracted steam, so the extracted steam could return to the turbine to generate more power. Moreover, both the water from the raw lignite and wet flue gas desulfurization (WFGD) processes were recovered, which minimized the water consumption of lignite-fired power plants. This study evaluated the energy- and water-saving potential of the proposed system at both air-cooling and wet-cooling power plants firing three types of lignite separately. The results showed that the higher the moisture content of lignite, the larger the net efficiency improvement and the make-up water rate reduction. The net efficiency improvement and make-up water rate reduction in power plants firing Yimin lignite reached 2.33% points and , respectively, at wet-cooling power plants, and 2.18% points and at air-cooling power plants. This means that zero water consumption can be achieved, and water and electricity can be output at the same time at air-cooling power plants. The technical and economic analysis showed that the net present value in 10-years of power plants firing different lignite types could reach 49.31, 36.19, and 16.44 million USD depending on the predry degree. The discounted payback period was 2.34–3.67 years, which showed good economic viability in all cases.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge the support from National KeyR&D Program of China (2017YFB0602902), and Doctoral Research Fund Program of Shandong Jianzhu University (XNBS20052).
References
Avagianos, I., D. Rakopoulos, and S. Karellas. 2020. “Review of process modeling of solid-fuel thermal power plants for flexible and off-design operation.” Energies 13 (24): 6587. https://doi.org/10.3390/en13246587.
Avagianos, I., I. Violidakis, E. Karampinis, D. Rakopoulos, E. Nanos, N. Polonidis, C. Papapavlou, P. Grammelis, and E. Kakaras. 2019. “Thermal simulation and economic study of predried lignite production retrofit of a Greek power plant for enhanced flexibility.” J. Energy Eng. 145 (2): 04019001. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000591.
Aziz, M., Y. Kansha, A. Kishimoto, Y. Kotani, Y. Liu, and A. Tsutsumi. 2012. “Advanced energy saving in low rank coal drying based on self-heat recuperation technology.” Fuel Process. Technol. 104 (Dec): 16–22. https://doi.org/10.1016/j.fuproc.2012.06.020.
Banooni, S., E. Hajidavalloo, and M. Dorfeshan. 2018. “Experimental and numerical study of the effects of pre-drying of S-PVC using a pneumatic dryer.” Powder Technol. 338 (Oct): 220–232. https://doi.org/10.1016/j.powtec.2018.06.027.
Fu, C., R. Anantharaman, K. Jordal, and T. Gundersen. 2015. “Thermal efficiency of coal-fired power plants: From theoretical to practical assessments.” Energy Convers. Manage. 105 (Nov): 530–544. https://doi.org/10.1016/j.enconman.2015.08.019.
Garousi Farshi, L., S. Khalili, and A. H. Mosaffa. 2018. “Thermodynamic analysis of a cascaded compression—Absorption heat pump and comparison with three classes of conventional heat pumps for the waste heat recovery.” Appl. Therm. Eng. 128 (Jan): 282–296. https://doi.org/10.1016/j.applthermaleng.2017.09.032.
Guo, Z. H., Q. H. Wang, M. X. Fang, Z. Y. Luo, and K. F. Cen. 2014. “Thermodynamic and economic analysis of polygeneration system integrating atmospheric pressure coal pyrolysis technology with circulating fluidized bed power plant.” Appl. Energy 113 (Jan): 1301–1314. https://doi.org/10.1016/j.apenergy.2013.08.086.
Han, X., J. Yan, S. Karellas, M. Liu, E. Kakaras, and F. Xiao. 2017. “Water extraction from high moisture lignite by means of efficient integration of waste heat and water recovery technologies with flue gas pre-drying system.” Appl. Therm. Eng. 110 (Jan): 442–456. https://doi.org/10.1016/j.applthermaleng.2016.08.178.
Han, Y., Y. Sun, and J. Wu. 2020. “An efficient solar/lignite hybrid power generation system based on solar-driven waste heat recovery and energy cascade utilization in lignite pre-drying.” Energy Convers. Manage. 205 (Feb): 112406. https://doi.org/10.1016/j.enconman.2019.112406.
Hatzilyberis, K. S., G. P. Androutsopoulos, and C. E. Salmas. 2007. “Indirect thermal drying of lignite: Design aspects of a rotary dryer.” Drying Technol. 18 (9): 2009–2049. https://doi.org/10.1080/07373930008917824.
Hübel, M., S. Meinke, M. T. Andrén, C. Wedding, J. Nocke, C. Gierow, E. Hassel, and J. Funkquist. 2017. “Modelling and simulation of a coal-fired power plant for start-up optimization.” Appl. Energy 208 (Dec): 319–331. https://doi.org/10.1016/j.apenergy.2017.10.033.
Kreutz, T., R. Williams, S. Consonni, and P. Chiesa. 2005. “Co-production of hydrogen electricity and from coal with commercially ready technology. Part B: Economic analysis.” Int. J. Hydrogen Energy 30 (7): 769–784. https://doi.org/10.1016/j.ijhydene.2004.08.001.
Li, Y., M. Yan, L. Zhang, G. Chen, L. Cui, Z. Song, J. Chang, and C. Ma. 2016. “Method of flash evaporation and condensation: Heat pump for deep cooling of coal-fired power plant flue gas: Latent heat and water recovery.” Appl. Energy 172 (Jun): 107–117. https://doi.org/10.1016/j.apenergy.2016.03.017.
Li, Z., Z. Miao, and X. Shen. 2019. “Combined effects of water content and primary air volume on performance of lignite-fired boiler.” Fuel 244 (May): 580–591. https://doi.org/10.1016/j.fuel.2019.01.184.
Lin, H., H. G. Jin, L. Gao, and W. Han. 2011. “Techno-economic evaluation of coal-based polygeneration systems of synthetic fuel and power with recovery.” Energy Convers. Manage. 52 (1): 274–283. https://doi.org/10.1016/j.enconman.2010.06.068.
Liu, H., L. Zhang, X. Han, and S. Zhou. 2020. “Effects of lignite predrying degree on the combustion and NO generation in a 600-MW lignite-fired boiler.” J. Energy Eng. 146 (6): 04020070. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000715.
Liu, M., Y. Qin, H. Yan, X. Han, and D. Chong. 2015a. “Energy and water conservation at lignite-fired power plants using drying and water recovery technologies.” Energy Convers. Manage. 105 (Nov): 118–126. https://doi.org/10.1016/j.enconman.2015.07.069.
Liu, M., J. Wang, J. Yan, D. Chong, and J. Liu. 2014. “A combined type fluid-bed dryer suitable for integration within a lignite-fired power plant: System design and thermodynamic analysis.” Drying Technol. 32 (8): 902–909. https://doi.org/10.1080/07373937.2013.875036.
Liu, M., D. Wu, F. Xiao, and J. Yan. 2015b. “A novel lignite-fired power plant integrated with a vacuum dryer: System design and thermodynamic analysis.” Energy 82 (Mar): 968–975. https://doi.org/10.1016/j.energy.2015.01.106.
Liu, M., J. Yan, B. Bai, D. Chong, X. Guo, and F. Xiao. 2011. “Theoretical study and case analysis for a predried lignite-fired power system.” Drying Technol. 29 (10): 1219–1229. https://doi.org/10.1080/07373937.2011.582559.
Liu, M., J. J. Yan, D. T. Chong, J. P. Liu, and J. S. Wang. 2013. “Thermodynamic analysis of pre-drying methods for pre-dried lignite-fired power plant.” Energy 49 (Jan): 107–118. https://doi.org/10.1016/j.energy.2012.10.026.
Ma, Y., Y. Yuan, J. Jin, H. Zhang, X. Hu, and D. Shi. 2013. “An environment friendly and effcient lignite-fired power generation process based on a boiler with an open pulverizing system and the recovery of water from mill-exhaust.” Energy 59 (Sep): 105–115. https://doi.org/10.1016/j.energy.2013.06.073.
Macknick, J., R. Newmark, G. Heath, and K. C. Hallett. 2012. “Operational water consumption and withdrawal factors for electricity generating technologies: A review of existing literature.” Environ. Res. Lett. 7 (4): 045802. https://doi.org/10.1088/1748-9326/7/4/045802.
Nikolopoulos, N., I. Violidakis, E. Karampinis, M. Agraniotis, C. Bergins, P. Grammelis, and E. Kakaras. 2015. “Report on comparison among current industrial scale lignite drying technologies (a critical review of current technologies).” Fuel 155 (Sep): 86–114. https://doi.org/10.1016/j.fuel.2015.03.065.
Osman, H., S. V. Jangam, J. D. Lease, and A. S. Mujumdar. 2011. “Drying of low-rank coal (LRC)—A review of recent patents and innovations.” Drying Technol. 29 (15): 1763–1783. https://doi.org/10.1080/07373937.2011.616443.
Panagiotis, D., N. Athanasios, N. Nikolaos, N. Aristeidis, R. Dimitrios, and K. Emmanouil. 2015. “Numerical investigation of NOx emissions for a flexible Greek lignite-fired power plant.” J. Energy Eng. 142 (2): E4015016.
Rakopoulos, D., M. Agraniotis, P. Grammelis, and E. Kakaras. 2017. “Efficient CHP-plant configuration for district heating systems utilizing low-rank coals.” J. Energy Eng. 143 (4): 04016066. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000417.
Shang, X., C. Si, J. Wu, Z. Miao, Y. Zhang, and Y. Wang. 2016. “Comparison of drying methods on physical and chemical properties of Shengli lignite.” Drying Technol. 34 (4): 454–461. https://doi.org/10.1080/07373937.2015.1060496.
Wang, C., X. Zhu, M. Yuan, and D. Che. 2020. “Thermodynamic analysis and case study of a new lignite-fired power plant using solar energy as drying heat source.” J. Energy Eng. 146 (3): 04020008. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000658.
Xiong, Y., H. Tan, Y. Wang, W. Xu, H. Mikulčić, and N. Duić. 2017. “Pilot-scale study on water and latent heat recovery from flue gas using fluorine plastic heat exchangers.” J. Cleaner Prod. 161 (Sep): 1416–1422. https://doi.org/10.1016/j.jclepro.2017.06.081.
Xu, C., X. Li, G. Xu, T. Xin, Y. Yang, W. Liu, and M. Wang. 2018. “Energy, exergy and economic analyses of a novel solar- lignite hybrid power generation process using lignite pre-drying.” Energy Convers. Manage. 170 (Aug): 19–33. https://doi.org/10.1016/j.enconman.2018.05.078.
Xu, C., G. Xu, Y. Yang, S. Zhao, K. Zhang, and D. Zhang. 2015. “An improved configuration of low-temperature pre-drying using waste heat integrated in an air-cooled lignite fired power plant.” Appl. Therm. Eng. 90 (Nov): 312–321. https://doi.org/10.1016/j.applthermaleng.2015.06.101.
Xu, C., G. Xu, S. Zhao, W. Dong, L. Zhou, and Y. Yang. 2016a. “A theoretical investigation of energy efficiency improvement by coal pre-drying in coal fired power plants.” Energy Convers. Manage. 122 (Aug): 580–588. https://doi.org/10.1016/j.enconman.2016.01.048.
Xu, G., W. Dong, C. Xu, Q. Liu, and Y. Yang. 2016b. “An integrated lignite pre-drying system using steam bleeds and exhaust flue gas in a 600 MW power plant.” Appl. Therm. Eng. 107 (Jul): 1145–1157. https://doi.org/10.1016/j.applthermaleng.2016.07.078.
Yan, M., L. Zhang, Y. Shi, L. Zhang, Y. Li, and C. Ma. 2018. “A novel boiler cold-end optimisation system based on bypass flue in coal-fired power plants: Heat recovery from wet flue gas.” Energy 152 (Jun): 84–94. https://doi.org/10.1016/j.energy.2018.03.129.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 24, 2021
Accepted: Sep 16, 2021
Published online: Nov 27, 2021
Published in print: Feb 1, 2022
Discussion open until: Apr 27, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.