Combined Impact of Alcohol-Fuel Properties on Performance and Emissions Characteristics with Low-Temperature Combustion in a Diesel Engine
Publication: Journal of Energy Engineering
Volume 147, Issue 4
Abstract
Low-temperature combustion (LTC) is a new combustion mode, and low cetane number fuels may be more appropriate for the LTC. Fuel properties play important roles both in the physical process of fuel-air mixing and the chemical process of combustion in the cylinder of diesel engines. Alcohol additives in diesel will definitely change its fuel properties. In this paper, an experiment was conducted to investigate the combined impact of alcohol fuel properties on the performance and emissions characteristics of a diesel engine operated at the LTC mode. A total of 20% ethanol, 20% propanol, and 20% n-butanol by volume were added in the diesel (represented as E20, Pr20, and Bu20), respectively, at different exhaust gas recirculation (EGR) rates. The results show that when the EGR rate reaches up to 35%, the CA50 phase obviously retards for E20, while the corresponding EGR rates are 40% for Pr20 and 45% for Bu20. The effects of fuel properties on cycle-to-cycle variations may be random or stochastic. Medium EGR rates may be the best choice for the LTC. Fuel properties have little effect on CO, THC, and emissions. But E20 can reduce soot emissions greatly within medium EGR regions. That is, E20 may be more proper as diesel LTC fuel.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The following data or models that support the findings of this study are available from the corresponding author upon reasonable request:
•
Data of cylinder pressure and heat release rate [Figs. 3(a–c)]; and
•
Data of CO, THC, NOx, and PM emissions [Figs. 6(a–c) and 7].
Acknowledgments
This work was funded by the National Natural Science Foundation of China (Grant No. 51976134).
References
Abu-Jrai, A., J. Rodríguez-Fernández, A. Tsolakis, A. Megaritis, K. Theinnoi, R. F. Cracknell, and R. H. Clark. 2009. “Performance, combustion and emissions of a diesel engine operated with reformed EGR. Comparison of diesel and GTL fuelling.” Fuel 88 (6): 1031–1041. https://doi.org/10.1016/j.fuel.2008.12.001.
Agarwal, A., A. Singh, and R. Maurya. 2017. “Evolution, challenges and path forward for low temperature combustion engines.” Prog. Energy Combust. Sci. 61 (Jul): 1–56. https://doi.org/10.1016/j.pecs.2017.02.001.
Armas, O., R. García-Contreras, and A. Ramos. 2013. “Impact of alternative fuels on performance and pollutant emissions of a light duty engine tested under the new European driving cycle.” Apply Energy 107 (Jul): 183–190. https://doi.org/10.1016/j.apenergy.2013.01.064.
Ayhan, V. 2021. “Experimental investigation of the effect of direct water injection on combustion, knock, and emissions for LPG-diesel dual-fuel engine.” J. Energy Eng. 147 (1): 04020084. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000739.
Bizon, K., G. Continillo, K. C. Leistner, E. Mancaruso, and B. M. Vaglieco. 2009. “POD-based analysis of cycle-to-cycle variations in an optically accessible diesel engine.” Proc. Combust. Inst. 32 (2): 2809–2816. https://doi.org/10.1016/j.proci.2008.08.010.
Chen, G., Y. Shen, Q. Zhang, M. Yao, Z. Zheng, and H. Liu. 2013. “Experimental study on combustion and emission characteristics of a diesel engine fueled with 2,5-dimethylfuran–diesel, n-butanol–diesel and gasoline–diesel blends.” Energy 54 (Jun): 333–342. https://doi.org/10.1016/j.energy.2013.02.069.
Chen, H., X. Su, J. He, and B. Xie. 2019. “Investigation on combustion and emission characteristics of a common rail diesel engine fueled with diesel/n-pentanol/methanol blends.” Energy 167 (Jan): 297–311. https://doi.org/10.1016/j.energy.2018.10.199.
Feng, H., X. Wang, and J. Zhang. 2019. “Study on the effects of intake conditions on the exergy destruction of low temperature combustion engine for a toluene reference fuel.” Energy Convers. Manage. 188 (May): 241–249. https://doi.org/10.1016/j.enconman.2019.02.090.
He, T., Z. Chen, L. Zhu, and Q. Zhang. 2018. “The influence of alcohol additives and EGR on the combustion and emission characteristics of diesel engine under high-load condition.” Appl. Therm. Eng. 140 (Jul): 363–372. https://doi.org/10.1016/j.applthermaleng.2018.05.064.
Huang, H., W. Tenng, Q. Liu, C. Zhou, Q. Wang, and X. Wang. 2016. “Combustion performance and emission characteristics of a diesel engine under low-temperature combustion of pine oil–diesel blends.” Energy Convers. Manage. 128 (Nov): 317–326. https://doi.org/10.1016/j.enconman.2016.09.090.
Huang, J., Y. Wang, S. Li, A. P. Roskilly, H. Yu, and H. Li. 2009. “Experimental investigation on the performance and emissions of a diesel engine fuelled with ethanol-diesel blends.” Appl. Therm. Eng. 29 (11–12): 2484–2490. https://doi.org/10.1016/j.applthermaleng.2008.12.016.
Hyunwook, P., S. Euijoon, and B. Choongsik. 2019. “Expansion of low-load operating range by mixture stratification in a natural gas-diesel dual-fuel premixed charge compression ignition engine.” Energy Convers. Manage. 194 (Aug): 186–198. https://doi.org/10.1016/j.enconman.2019.04.085.
Kalghatgi, G., P. Risberg, and H. Ångström. 2006. Advantages of fuels with high resistance to auto-ignition in late-injection, low-temperature, compression ignition combustion. Warrendale, PA: SAE Publications.
Kamimoto, T., and M. Bae. 1988. High combustion temperature for the reduction of particulate in diesel Engines. Warrendale, PA: SAE Publications.
Kawamoto, K., T. Araki, M. Shinzawa, S. Kimura, S. Koide, and M. Shibuya. 2004. Combination of combustion concept and fuel property for ultra-clean DI diesel. Warrendale, PA: SAE Publications.
Kitamura, T., T. Ito, J. Senda, and H. Fujimoto. 2002. “Mechanism of smokeless diesel combustion with oxygenated fuels based on the dependence of the equivalence ration and temperature on soot particle formation.” Int. J. Engine Res. 3 (4): 233–248.
Laguitton, O., C. Crua, T. Cowell, M. R. Heikal, and M. R. Gold. 2007. “The effect of compression ratio on exhaust emissions from a PCCI diesel engine.” Energy Convers. Manage. 48 (11): 2918–2924. https://doi.org/10.1016/j.enconman.2007.07.016.
Liu, H., G. Ma, B. Hu, Z. Zheng, and M. Yao. 2018. “Effects of port injection of hydrous ethanol on combustion and emission characteristics in dual-fuel reactivity controlled compression ignition (RCCI) mode.” Energy 145 (Feb): 592–602. https://doi.org/10.1016/j.energy.2017.12.089.
Moon, G., Y. Lee, K. Choi, and D. Jeong. 2010. “Emission characteristics of diesel, gas to liquid, and biodiesel-blended fuels in a diesel engine for passenger cars.” Fuel 89 (12): 3840–3846. https://doi.org/10.1016/j.fuel.2010.07.009.
Murayama, T., T. Yamada, N. Miyamoto, and T. Chikahisa. 1983. Nature and reduction of cycle-to-cycle combustion engine with ethanol–diesel fuel blends. Warrendale, PA: SAE Publications.
Northrop, W., S. Bohac, and D. Assanis. 2009. “Premixed low temperature combustion of biodiesel and blends in a high speed compression ignition engine.” SAE Int. J. Fuels Lubr. 2 (1): 28–40. https://doi.org/10.4271/2009-01-0133.
Papagiannakis, R. G., S. R. Krishnan, D. C. Rakopoulos, K. K. Srinivasan, and C. D. Rakopoulos. 2017. “A combined experimental and theoretical study of diesel fuel injection timing and gaseous fuel/diesel mass ratio effects on the performance and emissions of natural gas-diesel HDDI engine operating at various loads.” Fuel 202 (Aug): 675–687. https://doi.org/10.1016/j.fuel.2017.05.012.
Rakopoulos, C. D., A. M. Dimaratos, E. G. Giakoumis, and D. C. Rakopoulos. 2011. “Study of turbocharged diesel engine operation, pollutants emissions and combustion noise radiation during starting with bio-diesel or n-butanol diesel fuel blends.” Appl. Energy 88 (11): 3905–3916. https://doi.org/10.1016/j.apenergy.2011.03.051.
Rakopoulos, C. D., D. C. Rakopoulos, G. M. Kosmadakis, and R. G. Papagiannakis. 2019. “Experimental comparative assessment of butanol or ethanol diesel-fuel extenders impact on combustion features, cyclic irregularity, and regulated emissions balance in heavy-duty diesel engine.” Energy 174 (May): 1145–1157. https://doi.org/10.1016/j.energy.2019.03.063.
Rakopoulos, C. D., D. C. Rakopoulos, G. C. Mavropoulos, and G. M. Kosmadakis. 2018. “Investigating the EGR rate and temperature impact on diesel engine combustion and emissions under various injection timings and loads by comprehensive two-zone modeling.” Energy 157 (Aug): 990–1014. https://doi.org/10.1016/j.energy.2018.05.178.
Rakopoulos, D. C. 2021. “Effects of exhaust gas recirculation under fueling rate or air/fuel ratio-controlled strategies on diesel engine performance and emissions by two-zone combustion modeling.” J. Energy Eng. 147 (1): 04020079. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000729.
Rakopoulos, D. C., C. D. Rakopoulos, and E. G. Giakoumis. 2015. “Impact of properties of vegetable oil, bio-diesel, ethanol and n-butanol on the combustion and emissions of turbocharged HDDI diesel engine operating under steady and transient conditions.” Fuel 156 (Sep): 1–19. https://doi.org/10.1016/j.fuel.2015.04.021.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, R. G. Papagiannakis, and D. C. Kyritsis. 2014. “Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl ether.” Energy 73 (Aug): 354–366. https://doi.org/10.1016/j.energy.2014.06.032.
Ribeiro, N. M., et al. 2007. “The role of additives for diesel and diesel blended (ethanol or biodiesel) fuels: A review.” Energy Fuels 21 (4): 2433–2445. https://doi.org/10.1021/ef070060r.
Schmillen, K., and J. Wolschendorf. 1989. Cycle-to-cycle variations of combustion noise in diesel. Warrendale, PA: SAE Publications.
Su, W., Y. Lu, W. Yu, C. Wang, Y. Pei, Y. Sun, Y. Li, Z. Yu, and J. Wang. 2009. High density-low temperature combustion in diesel engines based on technologies of variable boost pressure and intake valve timing. Warrendale, PA: SAE Publications.
Wang, H., H. Hao, X. Li, K. Zhang, and M. Ouyang. 2009. “Performance of Euro III common rail heavy duty diesel engine fueled with gas to liquid.” Apply Energy 86 (10): 2257–2261. https://doi.org/10.1016/j.apenergy.2009.02.004.
Xia, Q., Z. Han, and W. Tian. 2020. “Comparative analysis of effect of diesel and n-butanol blend properties on combustion process and hydrocarbon emission at various oxygen-intake concentrations.” J. Energy Eng. 146 (3): 04020010. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000655.
Xuan, G., M. Jia, Y. Li, Y. Chang, H. Liu, and T. Wang. 2019. “Evaluation of variable compression ratio (VCR) and variable valve timing (VVT) strategies in a heavy-duty diesel engine with reactivity controlled compression ignition (RCCI) combustion under a wide load range.” Fuel 253 (Oct): 114–128. https://doi.org/10.1016/j.fuel.2019.05.020.
Yang, Z., T. Steffen, and R. Stobart. 2013. Disturbance sources in the diesel engine combustion process. Warrendale, PA: SAE Publications.
Yao, M., Z. Zheng, and H. Liu. 2009. “Progress and recent trends in homogeneous charge compression ignition (HCCI) engines.” Prog. Energy Combust. Sci. 35 (5): 398–437. https://doi.org/10.1016/j.pecs.2009.05.001.
Zhang, Q., X. Hu, Z. Li, B. Liu, Z. Chen, and J. Liu. 2018. “Combustion and emission characteristics of diesel engines using diesel, DMF/diesel, and n-pentanol/diesel fuel blends.” J. Energy Eng. 143 (3): 04018030. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000549.
Zhang, Q., C. Yang, and Y. Li. 2021. “Effects of ethanol, n-butanol, and n-pentanol addition to diesel fuel on combustion and emission characteristics in a common-rail diesel engine with exhaust-gas recirculation.” J. Energy Eng. 147 (1): 04020086. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000736.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 147 • Issue 4 • August 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 19, 2020
Accepted: Mar 4, 2021
Published online: May 4, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 4, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.