Experimental Investigations on Cell Performance of Proton Exchange Membrane Fuel Cells with Orientated-Type Flow Channels
Publication: Journal of Energy Engineering
Volume 146, Issue 6
Abstract
A better-designed flow channel can enhance the mass transfer and improve the performance of a proton exchange membrane fuel cell. An orientated-type flow channel can achieve guidance on reactant and product transfers, resulting in an increase in the mass transfer flux and the rapid removal of the product (especially liquid water). In this study, flow fields with different orientated-type gas flow channels having different baffles are fabricated, and their effects on the current density outputs of proton exchange membrane fuel cells under various heating temperature and reactant flow rate conditions are investigated using a self-constructed testing system. The experimental results indicate that cell performance can be increased when using orientated-type flow channels with baffles having longer leeward sides, and cell performance is increased more under a suitable heating temperature. Moreover, the increase in the current densities of proton exchange membrane fuel cells with smaller baffles is limited when increasing the reactant flow rates. This limitation can be avoided when using the orientated-type flow channels with baffles having longer leeward sides.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All of the data, models, or code generated or used during this study appear in the published article.
Acknowledgments
The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China (Grant No. 51976004).
References
Bao, Z. M., Z. Q. Niu, and K. Jiao. 2019. “Numerical simulation for metal foam two-phase flow field of proton exchange membrane fuel cell.” Int. J. Hydrogen Energy 44 (12): 6229–6244. https://doi.org/10.1016/j.ijhydene.2019.01.086.
Barati, S., B. Khoshandam, and M. M. Ghazi. 2018. “An investigation of channel blockage effects on hydrogen mass transfer in a proton exchange membrane fuel cell with various geometries and optimization by response surface methodology.” Int. J. Hydrogen Energy 43 (48): 21928–21939. https://doi.org/10.1016/j.ijhydene.2018.10.032.
Cai, G. C., Y. M. Liang, Z. C. Liu, and W. Liu. 2020. “Design and optimization of bio-inspired wave-like channel for a PEM fuel cell applying genetic algorithm.” Energy 192 (Feb): 116670. https://doi.org/10.1016/j.energy.2019.116670.
Chen, H., H. Guo, F. Ye, and C. F. Ma. 2019a. “Modification of the two-fluid model and experimental study of proton exchange membrane fuel cells with baffled flow channels.” Energy Convers. Manage. 195 (Sep): 972–988. https://doi.org/10.1016/j.enconman.2019.05.071.
Chen, H., H. Guo, F. Ye, C. F. Ma, Q. Liao, and X. Zhu. 2019b. “Mass transfer in proton exchange membrane fuel cells with baffled flow channels and a porous-blocked baffled flow channel design.” Int. J. Energy Res. 43 (7): 2910–2929. https://doi.org/10.1002/er.4461.
Fan, L. H., Z. Q. Niu, G. B. Zhang, and K. Jiao. 2018. “Optimization design of the cathode flow channel for proton exchange membrane fuel cells.” Energy Convers. Manage. 171 (Sep): 1813–1821. https://doi.org/10.1016/j.enconman.2018.06.111.
Fly, A., K. Kim, J. Gordon, and D. Butcher. 2019. “Liquid water transport in porous metal foam flow-field fuel cells: A two-phase numerical modelling and ex-situ experimental study.” Energies 12 (1186): 1–14. https://doi.org/10.3390/en12071186.
Guo, H., H. Chen, F. Ye, and C. F. Ma. 2019a. “Baffle shape effects on mass transfer and power loss of proton exchange membrane fuel cells with different baffled flow channels.” Int. J. Energy Res. 43 (7): 2737–2755. https://doi.org/10.1002/er.4328.
Guo, H., L. L. Wang, X. L. Yi, F. Ye, and C. F. Ma. 2019b. “Simulation of mode-switching methods’ effect on mass transfer in a unitized regenerative fuel cell.” J. Energy Eng. 145 (1): 04018071. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000589.
Han, S. H., N. H. Choi, and Y. D. Choi. 2014. “Simulation and experimental analysis on the performance of PEM fuel cell by the wave-like surface design at the cathode channel.” Int. J. Hydrogen Energy 39 (6): 2628–2638. https://doi.org/10.1016/j.ijhydene.2013.08.063.
He, L., M. Hou, Y. Y. Gao, D. H. Fang, P. H. Wang, B. Lv, and Z. G. Shao. 2020. “A novel three-dimensional flow field design and experimental research for proton exchange membrane fuel cells.” Energy Convers. Manage. 205 (Feb): 112335. https://doi.org/10.1016/j.enconman.2019.112335.
Kim, J., G. Luo, and C. Y. Wang. 2017. “Modeling two-phase flow in three-dimensional complex flow-fields of proton exchange membrane fuel cells.” J. Power Sources 365 (Oct): 419–429. https://doi.org/10.1016/j.jpowsour.2017.09.003.
Li, S. L., W. Zhou, R. L. Liu, J. L. Huang, and X. Y. Chu. 2020. “Fabrication of porous metal fiber sintered sheet as a flow field for proton exchange membrane fuel cell.” Curr. Appl Phys. 20 (5): 686–695. https://doi.org/10.1016/j.cap.2020.03.001.
Li, W., Q. Zhang, C. Wang, X. H. Yan, S. Y. Shen, G. F. Xia, F. J. Zhu, and J. L. Zhang. 2017. “Experimental and numerical analysis of a three-dimensional flow field for PEMFCs.” Appl. Energy 195 (Jun): 278–288. https://doi.org/10.1016/j.apenergy.2017.03.008.
Niu, Z., L. Fan, Z. Bao, and K. Jiao. 2018. “Numerical investigation of innovative 3D cathode flow channel in proton exchange membrane fuel cell.” Int. J. Energy Res. 42 (10): 3328–3338. https://doi.org/10.1002/er.4086.
Perng, S. W., and H. W. Wu. 2015. “A three-dimensional numerical investigation of trapezoid baffles effect on non-isothermal reactant transport and cell net power in a PEMFC.” Appl. Energy 143 (1): 81–95. https://doi.org/10.1016/j.apenergy.2014.12.059.
Pourrahmani, H., M. Moghimi, M. Siavashi, and M. Shirbani. 2019. “Sensitivity analysis and performance evaluation of the PEMFC using wave-like porous ribs.” Appl. Therm. Eng. 150 (5): 433–444. https://doi.org/10.1016/j.applthermaleng.2019.01.010.
Qin, Y. Z., X. Li, K. Jiao, Q. Du, and Y. Yin. 2014. “Effective removal and transport of water in a PEM fuel cell flow channel having a hydrophilic plate.” Appl. Energy 113 (1): 116–126. https://doi.org/10.1016/j.apenergy.2013.06.053.
Shen, J., Z. K. Tu, and S. H. Chan. 2020a. “Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field.” Appl. Therm. Eng. 164 (5): 114464. https://doi.org/10.1016/j.applthermaleng.2019.114464.
Shen, J. B., Y. P. Wang, G. Z. Yu, and H. G. Li. 2020b. “Thermal management of prismatic lithium-ion battery with mini channel cold plate.” J. Energy Eng. 146 (1): 04019033. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000621.
Song, J., H. Guo, F. Ye, and C. F. Ma. 2019. “Mass transfer and cell performance of a unitized regenerative fuel cell with nonuniform depth channel in oxygen-side flow field.” Int. J. Energy Res. 43 (7): 2940–2962. https://doi.org/10.1002/er.4472.
Song, Y. X., C. Z. Zhang, C. Y. Ling, M. Han, R. Y. Yong, D. Sun, and J. R. Chen. Forthcoming. “Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell.” Int. J. Hydrogen Energy https://doi.org/10.1016/j.ijhydene.2019.07.231.
Tang, Z. G., X. T. Min, A. Q. Song, and J. P. Cheng. 2020. “Thermal management of a cylindrical lithium-ion battery module using a multichannel wavy tube.” J. Energy Eng. 145 (1): 04018072. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000592.
Wan, Z. M., W. X. Quan, C. Yang, H. Z. Yan, X. Chen, T. M. Huang, X. D. Wang, and S. H. Chan. 2020. “Optimal design of a novel M-like channel in bipolar plates of proton exchange membrane fuel cell based on minimum entropy generation.” Energy Convers. Manage. 205 (Feb): 112386. https://doi.org/10.1016/j.enconman.2019.112386.
Wang, X. F., Y. Z. Qin, S. Y. Wu, S. Y. Wu, G. B. Zhang, W. J. Park, B. Xie, Y. Yin, and K. Jiao. 2019. “A dot matrix and sloping baffle cathode flow field of proton exchange membrane fuel cell.” J. Power Sources 434 (Sep): 1–12. https://doi.org/10.1016/j.jpowsour.2019.226741.
Wang, X. F., Y. Z. Qin, S. Y. Wu, G. B. Zhang, S. G. Xian, J. F. Zhang, and Y. Yin. 2020. “Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance.” J. Power Sources 457 (May): 228034. https://doi.org/10.1016/j.jpowsour.2020.228034.
Xu, Y., L. Peng, P. Yi, and X. M. Lai. 2018. “Numerical investigation of liquid water dynamics in wave-like gas channels of PEMFCs.” Int. J. Energy Res. 43 (3): 1191–1202. https://doi.org/10.1002/er.4353.
Yan, X., C. Guan, Y. Zhang, K. C. Jiang, G. H. Wei, X. J. Cheng, S. Y. Shen, and J. L. Zhang. 2019. “Flow field design with 3D geometry for proton exchange membrane fuel cells.” Appl. Therm. Eng. 147 (Jan): 1107–1114. https://doi.org/10.1016/j.applthermaleng.2018.09.110.
Zhang, G. B., and K. Jiao. 2018. “Three-dimensional multi-phase simulation of PEMFC at high current density utilizing Eulerian-Eulerian model and two-fluid model.” Energy Convers. Manage. 176 (Nov): 409–421. https://doi.org/10.1016/j.enconman.2018.09.031.
Zhang, G. B., B. Xie, Z. Bao, Z. Q. Niu, and K. Jiao. 2018. “Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field.” Int. J. Energy Res. 42 (15): 4697–4709. https://doi.org/10.1002/er.4215.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 21, 2020
Accepted: Jul 7, 2020
Published online: Sep 7, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 7, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.