Thermodynamic Analysis and Case Study of a New Lignite-Fired Power Plant Using Solar Energy as Drying Heat Source
Publication: Journal of Energy Engineering
Volume 146, Issue 3
Abstract
Lignite usually has a high moisture content and low calorific value, and should be predried before combustion to enhance power generation efficiency. Steam extracted from steam turbine and boiler exhaust gas are often applied in lignite predrying systems. However, the bleeding gas from the steam turbine reduces its output, and the exhaust gas originating from the boiler has insufficient drying capacity. In the present work, a new lignite power plant integrated with a solar drying system is proposed. A solar energy collection and storage tank system were employed to solve the problem of low heat density and instability of solar energy. Thermodynamic analysis results show that the area of reflectors declines at a decreasing rate with an increase in the direct normal irradiation (DNI). The power generation efficiencies of a solar drying lignite power plant (SDPP) and steam extraction drying power plant (SEDPP) can be increased by 0.68% and 0.33% for every rise in the drying degree. When the drying degree is 0.3 and DNI is , the economic analysis indicates that the simple payback periods for a conventional lignite power plant, SDPP, and SEDPP are 2.38, 3.20, and 2.53 years, respectively. In addition, the solar-to-electricity efficiency declines at a decreasing rate with increasing drying degree. The power generation efficiency of SDPP with dryer exhaust recovery is increased by 0.83% for each increase in the drying degree.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors acknowledge the financial support from the Natural Science Basic Research Plan in Shaanxi Province of China (2019JM-067) and the State Key Laboratory of Pollution Control and Resource Reuse Foundation (PCRRF18009).
References
Adibhatla, S., and S. C. Kaushik. 2017. “Energy, exergy, economic and environmental (4E) analyses of a conceptual solar aided coal fired 500 MWe thermal power plant with thermal energy storage option.” Sustain. Energy Technol. Assess. 21 (Jun): 89–99. https://doi.org/10.1016/j.seta.2017.05.002.
Ahmed, M. H., A. M. A. Amin, and H. E. Fath. 2019. “Modeling of solar power plant for electricity generation and water desalination.” J. Sol. Energy Eng. 141 (1): 011015. https://doi.org/10.1115/1.4041260.
Atif, M., and F. A. Al-Sulaiman. 2018. “Energy and exergy analyses of recompression Brayton cycles integrated with a solar power tower through a two-tank thermal storage system.” J. Energy Eng. 144 (4): 04018036. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000545.
Avagianos, I., I. Violidakis, E. Karampinis, D. Rakopoulos, E. Nanos, N. Polonidis, C. Papapavlou, P. Grammelis, and E. Kakaras. 2019. “Thermal simulation and economic study of predried lignite production retrofit of a Greek power plant for enhanced flexibility.” J. Energy Eng. 145 (2): 04019001. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000591.
Baghernejad, A., M. Yaghoubi, and K. Jafarpur. 2016. “Exergoeconomic optimization and environmental analysis of a novel solar-trigeneration system for heating, cooling and power production purpose.” Sol. Energy 134 (Sep): 165–179. https://doi.org/10.1016/j.solener.2016.04.046.
Bennamoun, L. 2013. “Integration of photovoltaic cells in solar drying systems.” Drying Technol. 31 (11): 1284–1296. https://doi.org/10.1080/07373937.2013.788510.
Ceylan, İ., M. Kaya, A. E. Gürel, and A. Ergun. 2013. “Energy analysis of a new design of a photovoltaic cell-assisted solar dryer.” Drying Technol. 31 (9): 1077–1082. https://doi.org/10.1080/07373937.2013.774409.
Che, D. 2008. Boilers: Theory, design and operation. Xi’an, China: Xi’an Jiaotong University Press.
Farkas, I. 2013. “Integrated use of solar energy for crop drying.” Drying Technol. 31 (8): 866–871. https://doi.org/10.1080/07373937.2013.790410.
Guo, X., M. Liu, F. Lai, D. Chong, J. Yan, and F. Xiao. 2012. “Theoretical study and case analysis of a predried lignite–fired power plant with the waste heat recovery system.” Drying Technol. 30 (4): 425–434. https://doi.org/10.1080/07373937.2011.645981.
Hu, S., C. Man, X. Gao, J. Zhang, X. Xu, and D. Che. 2013. “Energy analysis of low-rank coal pre-drying power generation systems.” Drying Technol. 31 (11): 1194–1205. https://doi.org/10.1080/07373937.2013.775146.
Jin, H., C. Fan, L. J. Guo, S. K. Liu, C. Q. Cao, and R. Y. Wang. 2017. “Experimental study on hydrogen production by lignite gasification in supercritical water fluidized bed reactor using external recycle of liquid residual.” Energ. Convers. Manage. 145 (Aug): 214–219. https://doi.org/10.1016/j.enconman.2017.04.102.
Li, C., R. Zhai, Y. Yang, K. Patchigolla, J. E. Oakey, and P. Turner. 2019. “Annual performance analysis and optimization of a solar tower aided coal-fired power plant.” Appl. Energy 237 (Mar): 440–456. https://doi.org/10.1016/j.apenergy.2019.01.003.
Liu, M., C. Wang, X. Han, G. Li, D. Chong, and J. Yan. 2017. “Lignite drying with solar energy: Thermodynamic analysis and case study.” Drying Technol. 35 (9): 1117–1129. https://doi.org/10.1080/07373937.2016.1233113.
Liu, M., J. S. Wang, J. J. Yan, D. T. Chong, and J. P. Liu. 2014. “A combined-type fluid-bed dryer suitable for integration within a lignite-fired power plant: System design and thermodynamic analysis.” Drying Technol. 32 (8): 902–909. https://doi.org/10.1080/07373937.2013.875036.
Liu, M., J. Yan, B. Bai, D. Chong, X. Guo, and F. Xiao. 2011. “Theoretical study and case analysis for a predried lignite-fired power system.” Drying Technol. 29 (10): 1219–1229. https://doi.org/10.1080/07373937.2011.582559.
Man, C., J. G. Zhu, Z. Q. Ouyang, J. Z. Liu, and Q. G. Lyu. 2018. “Experimental study on combustion characteristics of pulverized coal preheated in a circulating fluidized bed.” Fuel Process. Technol. 172 (Apr): 72–78. https://doi.org/10.1016/j.fuproc.2017.12.009.
Man, C., X. Zhu, X. Gao, and D. Che. 2015. “Combustion and pollutant emission characteristics of lignite dried by low temperature air.” Drying Technol. 33 (5): 616–631. https://doi.org/10.1080/07373937.2014.967402.
Milanese, M., M. Torresi, G. Colangelo, A. de Saponaro, and A. de Risi. 2018. “Numerical analysis of a solar air preheating coal combustion system for power generation.” J. Energy Eng. 144 (4): 04018038. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000553.
Rech, S., A. Lazzaretto, and E. Grigolon. 2018. “Optimum integration of concentrating solar technologies in a real coal-fired power plant for fuel saving.” Energ. Convers. Manage. 178 (Dec): 299–310. https://doi.org/10.1016/j.enconman.2018.10.026.
Reddy, K. S., and S. Nataraj. 2019. “Thermal analysis of porous volumetric receivers of concentrated solar dish and tower systems.” Renewable Energy 132 (Mar): 786–797. https://doi.org/10.1016/j.renene.2018.08.030.
Reyes-Belmonte, M., A. Sebastián, M. Romero, and J. González-Aguilar. 2016. “Optimization of a recompression supercritical carbon dioxide cycle for an innovative central receiver solar power plant.” Energy 112 (Oct): 17–27. https://doi.org/10.1016/j.energy.2016.06.013.
Suresh, M., K. S. Reddy, and A. K. Kolar. 2010. “4-E (energy, exergy, environment, and economic) analysis of solar thermal aided coal-fired power plants.” Energy Sustain. Dev. 14 (4): 267–279. https://doi.org/10.1016/j.esd.2010.09.002.
Tomanovic, I., S. Belosevic, N. Crnomarkovic, A. Milicevic, and D. Tucakovic. 2019. “Numerical modeling of in-furnace sulfur removal by sorbent injection during pulverized lignite combustion.” Int. J. Heat Mass Tran. 128 (Jan): 98–114. https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.129.
Xu, C., G. Xu, S. F. Zhao, L. Y. Zhou, Y. P. Yang, and D. K. Zhang. 2015. “An improved configuration of lignite pre-drying using a supplementary steam cycle in a lignite fired supercritical power plant.” Appl. Energy 160 (Dec): 882–891. https://doi.org/10.1016/j.apenergy.2015.01.083.
Zhang, M., X. Du, L. Pang, C. Xu, and L. Yang. 2016. “Performance of double source boiler with coal-fired and solar power tower heat for supercritical power generating unit.” Supplement, Energy 104 (SC): 64–75. https://doi.org/10.1016/j.energy.2016.03.111.
Zhu, X., C. A. Wang, C. Tang, and D. Che. 2017a. “Energy analysis of a lignite predrying power generation system with an efficient waste heat recovery system.” Drying Technol. 35 (12): 1492–1505. https://doi.org/10.1080/07373937.2016.1256891.
Zhu, Y., R. Zhai, J. Qi, Y. Yang, M. A. Reyes-Belmonte, M. Romero, and Q. Yan. 2017b. “Annual performance of solar tower aided coal-fired power generation system.” Supplement, Energy 119 (SC): 662–674. https://doi.org/10.1016/j.energy.2016.11.023.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 9, 2019
Accepted: Nov 4, 2019
Published online: Mar 17, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 17, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.