Effect of Thermal Resistance on the Random Combustion of Micro-Organic Dust Particles
Publication: Journal of Energy Engineering
Volume 144, Issue 1
Abstract
A new mathematical model is presented to investigate the random combustion of a combustible mixture of micro-organic dust particles and air. For this purpose, a model is developed assuming a flame structure composed of three zones: a broad preheat zone, a reaction zone, and a postflame zone. The random modeling of the combustion process is brought about by adding a source term in the energy equation indicating the random states of particle volatilization in the preheat zone. The effect of thermal resistance on the combustion characteristics, such as flame temperature and burning velocity, is studied using a nonzero Biot number in the model. Moreover, it is observed that particle size considerably impacts the flame propagation through organic dust particles. As a result, it is concluded that the increase in Biot number leads to a decrease in the burning velocity as well as flame temperature. The novelty of this research is the improved understanding of the random distribution of the combustion phenomenon, which leads to more realistic and reasonable predictions of the combustion physics compared to the previously published analytical and experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbasi, T., and Abbasi, S. (2007). “Dust explosions—Cases, causes, consequences, and control.” J. Hazard. Mater., 140(1), 7–44.
Bergthorson, J., Goroshin, S., Soo, M., Julien, P., Palecka, J., Frost, D., and Jarvis, D. (2015). “Direct combustion of recyclable metal fuels for zero-carbon heat and power.” Appl. Energy, 160(Dec), 368–382.
Bidabadi, M., et al. (2016a). “Modeling quenching distance and flame propagation speed through an iron dust cloud with spatially random distribution of particles.” J. Loss Prev. Process. Indust., 43(Sep), 138–146.
Bidabadi, M., Dizaji, F. F., Dizaji, H. B., and Ghahsareh, M. S. (2014). “Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust.” J. Cent. South Univ., 21(1), 326–337.
Bidabadi, M., and Esmaeilnejad, A. (2015). “An analytical model for predicting counterflow flame propagation through premixed dust micro particles with radiative heat loss.” J. Loss Prev. Process. Indust., 35(May), 182–199.
Bidabadi, M., Fanaee, A., and Rahbari, A. (2010a). “Investigation over the recirculation influence on the combustion of micro organic dust particles.” Appl. Math. Mech., 31(6), 685–696.
Bidabadi, M., Haghiri, A., and Rahbari, A. (2010b). “The effect of Lewis and Damköhler numbers on the flame propagation through micro-organic dust particles.” Int. J. Therm. Sci., 49(3), 534–542.
Bidabadi, M., and Rahbari, A. (2009). “Modeling combustion of lycopodium particles by considering the temperature difference between the gas and the particles.” Combust. Explosion Shock, 45(3), 278–285.
Bidabadi, M., Vakilabadi, M. A., Poorfar, A. K., Monteiro, E., Rouboa, A., and Rahbari, A. (2016b). “Mathematical modeling of premixed counterflow combustion of organic dust cloud.” Renewable Energy, 92(Jul), 376–384.
Chakraborty, S., Mukhopadhyay, A., and Sen, S. (2008). “Interaction of Lewis number and heat loss effects for a laminar premixed flame propagating in a channel.” Int. J. Therm. Sci., 47(1), 84–92.
Chen, Z., Burke, M. P., and Ju, Y. (2009). “Effects of Lewis number and ignition energy on the determination of laminar flame speed using propagating spherical flames.” Proc. Combust. Inst., 32(1), 1253–1260.
Datta, A., Ganguly, R., and Sarkar, L. (2010). “Energy and exergy analyses of an externally fired gas turbine (EFGT) cycle integrated with biomass gasifier for distributed power generation.” Energy, 35(1), 341–350.
Han, O.-S., Yashima, M., Matsuda, T., Matsui, H., Miyake, A., and Ogawa, T. (2000). “Behavior of flames propagating through lycopodium dust clouds in a vertical duct.” J. Loss Prev. Process. Indust., 13(6), 449–457.
Han, O.-S., Yashima, M., Matsuda, T., Matsui, H., Miyake, A., and Ogawa, T. (2001). “A study of flame propagation mechanisms in lycopodium dust clouds based on dust particles’ behavior.” Loss Prev. Process. Indust., 14(3), 153–160.
Mohammadi, M., Bidabadi, M., Khalili, H., and Poorfar, A. K. (2016). “Modeling counterflow combustion of dust particle cloud in heterogeneous media.” J. Energy Eng., 04016040.
Proust, C. (2006a). “A few fundamental aspects about ignition and flame propagation in dust clouds.” J. Loss Prev. Process. Indust., 19(2), 104–120.
Proust, C. (2006b). “Flame propagation and combustion in some dust-air mixtures.” J. Loss Prev. Proc., 19(1), 89–100.
Rahbari, A., and Barari, G. (2016). “Theoretical study of triple-flame temperature distribution in heat-recirculated microcombustor.” J. Energy Eng., 04016009.
Rahbari, A., Wong, K.-F., Vakilabadi, M. A., Poorfar, A. K., and Afzalabadi, A. (2017). “Theoretical investigation of particle behavior on flame propagation in lycopodium dust cloud.” J. Energy Resour., 139(1), 012202.
Seshadri, K., Berlad, A., and Tangirala, V. (1992). “The structure of premixed particle-cloud flames.” Combust. Flame, 89(3–4), 333–342.
Zhao, W., Li, Z., Zhao, G., Zhang, F., and Zhu, Q. (2008). “Effect of air preheating and fuel moisture on combustion characteristics of corn straw in a fixed bed.” Energy Convers. Manage., 49(12), 3560–3565.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Dec 15, 2016
Accepted: Jul 13, 2017
Published online: Nov 23, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.