Effect of the Fuel-Injection Strategy on Flame-Front Evolution in an Optical Wall-Guided DISI Engine with Gasoline and Butanol Fueling
Publication: Journal of Energy Engineering
Volume 142, Issue 2
Abstract
This work investigates the effect of n-butanol on combustion processes in a direct injection spark ignition (DISI) engine through the analysis of flame front propagation. Specific attention is given to the sensitivity of n-butanol when changing injection mode in terms of timing and number of injections. Tests were carried out on an optically accessible single-cylinder DISI engine fueled with n-butanol and gasoline, alternatively. The engine is equipped with the head of a commercial turbocharged engine with similar geometrical specifications (bore, stroke, compression ratio). The head has four valves and a centrally located spark device. A conventional elongated hollow piston is used and an optical crown, accommodating a fused-silica window, is screwed onto it. The injector is side mounted and features six holes oriented so that the spray is directed toward the piston crown. During the experimental activity, injection pressure was maintained at 100 bar for all conditions; homogeneous charge conditions performed through single- and split-injection strategy (i.e., two injections per cycle) were compared for investigating their influence on combustion and emissions. Cycle-resolved visualization was applied in order to follow the combustion process, from ignition to the completion of flame front propagation. Macroscopic parameters (inflamed area, shape factor) and microscopic data (curvature distributions) were evaluated through image processing. All the optical data were correlated with conventional measurements of thermodynamic analysis and exhaust emissions. The effect of split injection was found to be relatively negligible for gasoline, while significant differences were recorded when switching from single to double injection for butanol. This points to a different mixture formation process, mainly related to the evaporative properties of butanol.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank Alfredo Mazzei and Stefano Valentini for the technical support.
References
Alagumalai, A. (2014). “Internal combustion engines: Progress and prospects.” Renewable Sustainable Energy Rev., 38, 561–571.
Aleiferis, P. G., Serras-Pereira, J., and Richardson, D. (2013). “Characterisation of flame development with ethanol, butanol, iso-octane, gasoline and methane in a direct-injection spark-ignition engine.” Fuel, 109, 256–278.
Aleiferis, P. G., Taylor, A., Whitelaw, J., Ishii, K., Urata, Y. (2000). “Cyclic variations of initial flame Kernel growth in a Honda VTEC-E lean-burn spark-ignition engine.”, Washington, DC.
Bergthorson, J. M., and Thomson, M. J. (2015). “A review of the combustion and emissions properties of advanced transportation biofuels and their impact on existing and future engines.” Renewable Sustainable Energy Rev., 42, 1393–1417.
Boretti, A., Osman, A., Aris, I. (2011). “Direct injection of hydrogen, oxygen and water in a novel two stroke engine.” Int. J. Hydrogen Energy, 36(16), 10100–10106.
Bowditch, F. (1961). “A new tool for combustion research: A quartz piston engine.”, Washington, DC.
Chadwell, C. J., Alger, T., Zuehl, J., and Gukelberger, R. (2014). “A demonstration of dedicated EGR on a 2.0 L GDI engine.” J. Int. Eng., 7(1), 434–447.
Cho, H., and Min, K. (2003). “Measurement of liquid fuel film distribution on the cylinder liner of a spark ignition engine using the laser-induced fluorescence technique.” Meas. Sci. Technol., 14(7), 975–982.
Deng, B., et al. (2013). “The heat release analysis of bio-butanol/gasoline blends on a high speed SI (spark ignition) engine.” Energy, 60, 230–241.
Drake, M. C., Fansler, T. D., Solomon, A. S., and Szekely, G. A. (2003). “Piston fuel films as a source of smoke and hydrocarbon emissions from a wall-controlled spark-ignited direct-injection engine.”, Washington, DC.
Fraser, N., Blaxill, H., Lumsden, G., and Bassett, M. (2009). “Challenges for increased efficiency through gasoline engine downsizing.” Int. J. Engines, 2(1), 991–1008.
Gashi, S., Hult, J., Jenkins, K. W., Chakraborty, N., Cant, S., and Kaminski, C. F. (2005). “Curvature and wrinkling of premixed flame kernels—Comparisons of OH PLIF and DNS data.” Proc. Comb. Inst., 30(1), 809–817.
Giakoumis, E. G., Rakopoulos, C. D., Dimaratos, A. M., Rakopoulos, D. C. (2013). “Exhaust emissions with ethanol or n-butanol diesel fuel blends during transient operation: A review.” Renewable Sustainable Energy. Rev., 17, 170–190.
Giechaskiel, B., et al. (2014). “Review of motor vehicle particulate emissions sampling and measurement: From smoke and filter mass to particle number.” J. Aerosol. Sci., 67, 48–86.
Gu, X. L., Huang, Z. H., Cai, J., Gong, J., Wu, X. S., and Lee, C. F. (2012). “Emission characteristics of a spark-ignition engine fuelled with gasoline-n-butanol blends in combination with EGR.” Fuel, 93, 611–617.
Haq, M. Z., Sheppard, C. G. W., Woolley, R., Greenhalgh, D. A., and Lockett, R. D. (2002). “Wrinkling and curvature of laminar and turbulent premixed flames.” Combust. Flame, 131(1–2), 1–15.
He, B. Q., Liu, M. B., and Zhao, H. (2015). “Comparison of combustion characteristics of n-butanol/ethanol-gasoline blends in a HCCI engine.” Energy Convers. Manage., 95, 101–109.
Heywood, J. B. (1988). Internal combustion engine fundamentals, McGraw Hill, New York.
Irimescu, A., Merola, S. S., Tornatore, C., and Valentino, G. (2015). “Development of a semi-empirical convective heat transfer correlation based on thermodynamic and optical measurements in a spark ignition engine.” Appl. Energy, in press.
Jenkins, K. W., and Cant, R. S. (2002). “Curvature effects on flame kernels in a turbulent environment.” Proc. Comb. Inst., 29(2), 2023–2029.
Klinger, T. (2003). Image processing with LabVIEW and IMAQ vision, Prentice Hall Professional, NJ.
Kosmadakis, G., and Rakopoulos, C. (2015). “Computational fluid dynamics study of alternative nitric-oxide emission mechanisms in a spark-ignition engine fueled with hydrogen and operating in a wide range of exhaust gas recirculation rates for load control.” J. Energy Eng., C4014008.
Liu, H., et al. (2014). “Time-resolved spray, flame, soot quantitative measurement fueling n-butanol and soybean biodiesel in a constant volume chamber under various ambient temperatures.” Fuel, 133, 317–325.
Liu, H., Lee, C. F., Huo, M., and Yao, M. (2011). “Combustion characteristics and soot distributions of neat butanol and neat soybean biodiesel.” Energy Fuels, 25(7), 3192–3203.
Liu, H., Li, S., Zheng, Z., Xu, J., and Yao, M. (2013). “Effects of n-butanol, 2-butanol, and methyl octynoate addition to diesel fuel on combustion and emissions over a wide range of exhaust gas recirculation (EGR) rates.” Appl. Energy., 112, 246–256.
Liu, Y., Guessous, L., Sangeorzan, B., and Alkidas, A. (2015). “Laboratory experiments on oil-jet cooling of internal combustion engine pistons: Area-average correlation of oil-jet impingement heat transfer.” J. Energy Eng., C4014003.
Ma, X., Xu, H., Jiang, C., and Shuai, S. (2014). “Ultra-high speed imaging and OH-LIF study of DMF and MF combustion in a DISI optical engine.” Appl. Energy, 122, 247–260.
Mamalis, S., and Assanis, D. (2015). “Second-law analysis of boosted HCCI engines: Modeling study.” J. Energy Eng., C4014014.
Marchitto, L., Valentino, G., Merola, S., and Tornatore, C. (2015). “Characterization of alcohol sprays from multi-hole injector for DISI engines through PIV technique.”, Washington, DC.
Merola, S., Irimescu, A., Tornatore, C., Marchitto, L., and Valentino, G. (2015). “Split injection in a DISI engine fuelled with butanol and gasoline analyzed through integrated methodologies.” Int. J. Engines, 8(2), 474–494.
Nalluri, V. R., Schirg, P., Gao, X., Virdis, A., Imanidis, G., and Kuentz, M. (2010). “Different modes of dynamic image analysis in monitoring of pharmaceutical dry milling process.” Int. J. Pharm., 391(1), 107–114.
Papagiannakis, R., Zannis, T., Rakopoulos, D., and Rakopoulos, C. (2015). “Effects of boost pressure and spark timing on performance and exhaust emissions in a heavy-duty spark-ignited wood-gas engine.” J. Energy Eng., C4014013.
Payri, F., Lujan, J. M, Martin, J. M, and Abbad, A. (2010). “Digital signal processing of in-cylinder pressure for combustion diagnosis of internal combustion engines.” Mech. Syst. Sig. Process, 24(6), 1767–1784.
Rakopoulos, D. C., Rakopoulos, C. D, and Giakoumis, E. G. (2015). “Impact of properties of vegetable oil, bio-diesel, ethanol and n-butanol on the combustion and emissions of turbocharged HDDI diesel engine operating under steady and transient conditions.” Fuel, 156, 1–19.
Rakopoulos, D. C., Rakopoulos, C. D., Giakoumis, E. G., Dimaratos, A. M., and Kyritsis, D. C. (2010). “Effects of butanol-diesel fuel blends on the performance and emissions of a high-speed DI diesel engine.” Energy Convers. Manage., 51(10), 1989–1997.
Rakopoulos, D. C., Rakopoulos, C. D., Giakoumis, E. G., Papagiannakis, R. G., and Kyritsis, D. C. (2014). “Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl ether.” Energy, 73, 354–366.
Saidur, R., Rezaei, M., Muzammil, W. K., Hassan, M. H., Paria, S., and Hasanuzzaman, M. (2012). “Technologies to recover exhaust heat from internal combustion engines.” Renewable Sustainable Energy Rev., 16(8), 5649–5659.
Sáinz, D., et al. (2011). “Conversion of a gasoline engine-generator set to a bi-fuel (hydrogen/gasoline) electronic fuel-injected power unit.” Int. J. Hydrogen Energy, 36(21), 13781–13792.
Singh, S. B., Dhar, A., and Agarwal, A. K. (2015). “Technical feasibility study of butanol-gasoline blends for powering medium-duty transportation spark ignition engine.” Renewable Energy, 76, 706–716.
Soika, A., Dinkelacker, F., and Leipertz, A. (2003). “Pressure influence on the flame front curvature of turbulent premixed flames: Comparison between experiment and theory.” Combust. Flame, 132(3), 451–462.
Sonka, M., Hlavac, V., and Boyle, R. (2014). Image processing, analysis, and machine vision, 4th Ed., Cengage Learning, Boston.
Su, J., Xu, M., Li, T., Gao, Y., and Wang, J. (2014). “Combined effects of cooled EGR and a higher geometric compression ratio on thermal efficiency improvement of a downsized boosted spark-ignition direct-injection engine.” Energy Convers. Manage., 78, 65–73.
Vision Assistant 2011 [Computer software]. (2011). National Instruments.
Yao, C., Chu, J., and Han, B. (2011). “Performance experiment of gasoline engine by using oxygen-enriched intake air.” ICTE 2011, ASCE, Reston, VA, 3086–3091.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 142 • Issue 2 • June 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: May 6, 2015
Accepted: Jun 24, 2015
Published online: Sep 18, 2015
Discussion open until: Feb 18, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.