Development of Double-Stage Metal Hydride–Based Hydrogen Compressor for Heat Transformer Application
Publication: Journal of Energy Engineering
Volume 141, Issue 4
Abstract
For the development of a double-stage metal hydride–based heat transformer (DS-MHHT), three metal hydrides, namely, A, B, and C, with different thermo-physical properties are required. Hydrides A and B together act as a hydrogen compressor, and hydride C upgrades the heat input quality. In the present paper, the performance tests of a double-stage metal hydride–based hydrogen compressor (DS-MHHC) employed in the development of metal hydride–based heat transformer are presented. The metal hydrides chosen for the present study are and . The effects of supply pressure and heat source (desorption) temperature on the delivery pressure, amount of hydrogen compressed, and isentropic efficiency of the hydrogen compressor were investigated. It is observed that an increase in supply pressure up to 10 bar significantly increases the delivery pressure, which reduces the compressor efficiency significantly. A maximum compression ratio of 22 was obtained when the DS-MHHC operated at 2 bar supply pressure and 140°C heat source temperature. At supply conditions of 10 bar supply pressure and 140°C heat source temperature, the maximum delivery pressure achieved was 74 bar.
Get full access to this article
View all available purchase options and get full access to this article.
References
Hopkins, R., and Kim, K. J. (2010). “Hydrogen compression characteristics of dual stage thermal compressor system utilizing and as working metal hydrides.” Int. J. Hydrogen Energy, 35(11), 5693–5702.
Isselhorst, A., and Groll, M. (1995). “Two-stage metal hydride heat transformer laboratory model.” J. Alloys Compd., 231(1–2), 888–894.
Kim, J. K., Park, S., Kim, K. J., and Gawlik, K. (2008). “A hydrogen-compression system using porous metal hydride pellets of LaNi5-xAlx.” Int. J. Hydrogen Energy, 33(2), 870–877.
Laurencelle, P., Dehouche, Z., Morin, F., and Goyette, J. (2009). “Experimental study on a metal hydride based hydrogen compressor.” J. Alloys Compd., 475(1–2), 810–816.
Luo, G., et al. (2010). “Properties of La0.2Y0.8Ni5–xMnx alloys for high-pressure hydrogen compressor.” Int. J. Hydrogen Energy, 35(15), 8262–8267.
Muthukumar, P., Maiya, M. P., and Murthy, S. S. (2005). “Experiments on a metal hydride based hydrogen compressor.” Int. J. Hydrogen Energy, 30(8), 879–892.
Muthukumar, P., Patel, K. S., Sachin, P., and Singhal, N. (2012). “Computational study on metal hydride based three-stage hydrogen compressor.” Int. J. Hydrogen Energy, 37(4), 3797–3806.
Sekhar, B. S., and Muthukumar, P. (2013). “Performance tests on a double-stage metal hydride based heat transformer.” Int. J. Hydrogen Energy, 38(35), 15428–15437.
Sekhar, B. S., Muthukumar, P., and Saikia, R. (2012). “Tests on a metal hydride based thermal energy storage system.” Int. J. Hydrogen Energy, 37(4), 3818–3824.
Sekhar, B. S., Pailwan, S. P., and Muthukumar, P. (2013). “Studies on metal hydride based single-stage heat transformer.” Int. J. Hydrogen Energy, 38(17), 7178–7187.
Suda, S., Komazaki, Y., Narasaki, H., and Uchida, M. (1991). “Development of a double-stage heat pump: Experimental and analytical survey.” J. Less-Common Met., 172–174, 1092–1110.
Tusher, E., Weinzierl, P., and Eder, O. J. (1984). “Dynamic hydrogen sorption and its influence on metal hydride heat pump operation.” Int. J. Hydrogen Energy, 9(9), 783–797.
Vanhanen, J. P., Hagström, M. T., and Lund, P. D. (1999). “Combined hydrogen compressing and heat transforming through metal hydrides.” Int. J. Hydrogen Energy, 24(5), 441–448.
Wang, X. H., Bei, Y. Y., Song, X. C., Fang, G. H., Li, S. Q., and Chen, C. P. (2007). “Investigation on high-pressure metal hydride hydrogen compressor.” Int. J. Hydrogen Energy, 32(16), 4011–4015.
Werner, R., and Groll, M. (1991). “Two-stage metal hydride heat transformer laboratory model: Results of reaction test beds.” J. Less-Common Met., 172–174, 1122–1129.
Willers, E., and Groll, M. (1999). “The two-stage metal hydride heat transformer.” Int. J. Hydrogen Energy, 24(2–3), 269–276.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 10, 2014
Accepted: Sep 22, 2014
Published online: Oct 17, 2014
Discussion open until: Mar 17, 2015
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.