Analysis of Performance and Efficiency of Conservation Voltage Optimization Considering Load Model Uncertainty
Publication: Journal of Energy Engineering
Volume 141, Issue 1
Abstract
This paper presents a novel method for evaluating the performance of conservation voltage optimization (CVO). The method investigates the load-to-voltage (LTV) sensitivity. A time-varying exponential load model is developed to represent the load’s dependence on voltage and other factors. The model parameters are estimated by applying the recursive least squares (RLS) algorithm. The effects of CVO can be assessed by using the estimated model parameters. The proposed RLS-based algorithm is validated by simulation tests and the Euclidian distance–based comparison method. Field test results also show the accuracy and effectiveness of the presented algorithm. To address the uncertainty and variability of the CVO performance, the Kolmogorov-Smirnov test is used to determine the distribution that represents the CVO effect of each substation. The proposed methodology can assist utilities in selecting target substations to implement voltage optimization.
Get full access to this article
View all available purchase options and get full access to this article.
References
Beck, R. W. (2007). “Distribution efficiency initiative final report.” 〈https://www.leidos.com/NEEA-DEI_Report.pdf〉 (Dec. 01, 2007).
Begovic, M., and Mills, R. (1995). “Load identification and voltage stability monitoring.” IEEE Trans. Power Syst., 10(1), 109–116.
Begovic, M., Novosel, D., Milosevic, B., and Kostic, M. (2000). “Impact of distribution efficiency on generation and voltage stability.” Proc., 33rd Annual Hawaii International Conf. System Sciences, 2000, Institute of Electrical and Electronics Engineers, New York.
Choi, B.-K., et al. (2006). “Measurement-based dynamic load models: Derivation, comparison, and validation.” IEEE Trans. Power Syst., 21(3), 1276–1283.
Chowdhury, B. H., and Tseng, C.-L. (2007). “Distributed energy resources: Issues and challenges.” J. Energy Eng., 109–110.
Dabic, V., Siew, C., Peralta, J., and Acebedo, D. (2010). “BC hydro’s experience on voltage VAR optimization in distribution system.” Transmission and Distribution Conf. and Exposition, 2010 IEEE PES, Institute of Electrical and Electronics Engineers, New York.
De Steese, J., Merrick, S., and Kennedy, B. (1990). “Estimating methodology for a large regional application of conservation voltage reduction.” IEEE Trans. Power Syst., 5(3), 862–870.
Diaz-Aguilo, M., et al. (2013). “Field-validated load model for the analysis of CVR in distribution secondary networks: Energy conservation.” IEEE Trans. Power Delivery, 28(4), 2428–2436.
Dwyer, A., Nielsen, R. E., Stangl, J., and Markushevich, N. S. (1995). “Load to voltage dependency tests at BC hydro.” IEEE Trans. Power Syst., 10(2), 709–715.
Frimpong, S. (2008). “Global energy security: The case for a multifaceted solution strategy.” J. Energy Eng., 109–110.
Karlsson, D., and Hill, D. J. (1994). “Modelling and identification of nonlinear dynamic loads in power systems.” IEEE Trans. Power Syst., 9(1), 157–166.
Kennedy, B., and Fletcher, R. (1991). “Conservation voltage reduction (CVR) at Snohomish County PUD.” IEEE Trans. Power Syst., 6(3), 986–998.
Kersting, W. (1991). “Radial distribution test feeders.” IEEE Trans. Power Syst., 6(3), 975–985.
Krupa, T. J., and Asgeirsson, H. (1987). “The effects of reduced voltage on distribution circuit loads.” IEEE Trans. Power Syst., 2(4), 1013–1018.
Lasseter, R. H. (2007). “Microgrids and distributed generation.” J. Energy Eng., 144–149.
Lauria, D. (1987). “Conservation voltage reduction (CVR) at Northeast Utilities.” IEEE Trans. Power Syst., 2(4), 1186–1191.
Lefebvre, S., Gaba, G., Ba, A.-O., and Asber, D. (2008). “Measuring the efficiency of voltage reduction at Hydro-Québec distribution.” Power and Energy Society General Meeting-Conversion and Delivery of Electrical Energy in the 21st Century, 2008 IEEE, Institute of Electrical and Electronics Engineers, New York.
Massey, F. J., Jr. (1951). “The Kolmogorov-Smirnov test for goodness of fit.” J. Am. Stat. Assoc., 46(253), 68–78.
Ohyama, T., Watanabe, A., Nishimura, K., and Tsuruta, S. (1985). “Voltage dependence of composite loads in power systems.” IEEE Trans. Power Apparatus Syst., 104(11), 3064–3073.
OpenDSS [Computer software]. ESRI, Palo Alto, CA.
Peskin, M. A., Powell, P. W., and Hall, E. J. (2012). “Conservation voltage reduction with feedback from advanced metering infrastructure.” Transmission and Distribution Conf. and Exposition (T&D), 2012 IEEE PES, Institute of Electrical and Electronics Engineers, New York.
Preiss, R., and Warnock, V. (1978). “Impact of voltage reduction on energy and demand.” IEEE Trans. Power Apparatus Syst., 97(5), 1665–1671.
Schneider, K., Fuller, J., Tuffner, F., and Singh, R. (2010). “Evaluation of conservation voltage reduction (CVR) on a national level.” 〈http://www.pnl.gov/main/publications/external/technical_reports/PNNL-19596.pdf〉 (Jul. 1, 2010).
Short, T. A., and Mee, R. W. (2012). “Voltage reduction field trials on distributions circuits.” Transmission and Distribution Conf. and Exposition (T&D), 2012 IEEE PES, Institute of Electrical and Electronics Engineers, New York.
Srinivasan, K., and Lafond, C. (1995). “Statistical analysis of load behavior parameters at four major loads.” IEEE Trans. Power Syst., 10(1), 387–392.
Wang, Z., Begovic, M., and Wang, J. (2014). “Analysis of conservation voltage reduction effects based on multistage SVR and stochastic process.” IEEE Trans. Smart Grid, 5(1), 431–439.
Wang, Z., and Wang, J. (2013). “Review on implementation and assessment of conservation voltage reduction.” IEEE Trans. Power Syst., 99, 1–10.
Wang, Z., and Wang, J. (2014). “Time-varying stochastic assessment of conservation voltage reduction based on load modeling.” IEEE Trans. Power Syst., 99, 1–8.
Warnock, V., and Kirkpatrick, T. (1986). “Impact of voltage reduction on energy and demand: Phase II.” IEEE Trans. Power Syst., 1(2), 92–95.
Wilson, T., and Bell, D. (2004). “Energy conservation and demand control using distribution automation technologies.” Rural Electric Power Conf., 2004, Institute of Electrical and Electronics Engineers, New York.
Wilson, T. L. (2010). “Measurement and verification of distribution voltage optimization results.” Power and Energy Society General Meeting, 2010 IEEE, Institute of Electrical and Electronics Engineers, New York.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 31, 2013
Accepted: Jan 28, 2014
Published online: Apr 2, 2014
Discussion open until: Sep 2, 2014
Published in print: Mar 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.