Optimization of Heliostat Layout in Central Receiver Solar Power Plants
Publication: Journal of Energy Engineering
Volume 140, Issue 4
Abstract
In this paper, the main aim is to optimize the heliostat layout in central receiver solar power plants in order to achieve the maximum heliostat field efficiency using a genetic algorithm as an optimization tool. First, an algorithm is developed based on vector geometry in order to select an individual heliostat and then calculate its characteristic angles at any time and location. The process of the program will be applied to track the Sun as a control function. The best configuration is obtained by considering the radial staggered layout of the heliostat field. The locations of the heliostats are determined, and the efficiency of each heliostat is calculated to find the most appropriate condition with the highest efficiency. Calculating the power of each heliostat supplied on the receiver will make it possible to determine the absorbed total heat power. At this stage, the genetic algorithm is applied to find the best heliostat layout to obtain the maximum efficiency of the field for a specific absorbed power supplied on the receiver. The results show that by changing the design parameters, i.e., increasing the tower height and decreasing the heliostat height by 7.7 and 19.5%, respectively, the total efficiency of the field is increased by almost 4% and the total area of heliostats is decreased by 17%. In other words, a more efficient heliostat layout can be achieved by choosing new design parameters.
Get full access to this article
View all available purchase options and get full access to this article.
References
Baum, V. A., Aparasi, R. R., and Garf, B. A. (1957). “High power solar installation.” Sol. Energy, 1(1), 6–12.
Collado, F. J. (2008). “Quick evaluation of the annual heliostat field efficiency.” Sol. Energy, 82(4), 79–84.
Collado, F. J. (2009). “Preliminary design of surrounding heliostat fields.” Renew. Energy, 34(5), 1359–1363.
Collado, F. J. (2010). “One-point fitting of the flux density produced by a heliostat.” Sol. Energy, 84(4), 673–684.
Collado, F. J., and Turegano, J. A. (1989). “Calculation of the annual thermal energy supplied by a defined heliostat field.” Sol. Energy, 42(2), 49–65.
De Jong, K. A. (1975). “Analysis of the behavior of a class of genetic adaptive systems.” Ph.D. dissertation, Univ. of Michigan, Ann Arbor.
Duffie, J. A., and Beckman, W. A. (2006). Solar engineering of thermal processes, 3rd Ed., Wiley, New York.
Falcone, P. K. (1986). “A handbook for solar central receiver design.”, Sandia National Laboratories, Albuquerque.
Goldberg, D. E. (1989). Genetic algorithms in search, optimization, and machine learning, Addison-Wesley, Reading, MA.
Haupt, R. L., and Haupt, S. E. (2004). Practical genetic algorithms, Wiley, Hoboken, NJ.
Holland, J. H. (1975). Adaptation in natural and artificial systems, Univ. of Michigan Press, Ann Arbor, MI.
Holland, J. H. (1992). “Genetic algorithms.” Sci. Am., 267(1), 66–72.
Kistler, B. L. (1986). “A user’s manual for DELSOL3: A computer code for calculating the optical performance and optimal system design for solar thermal central receiver plants.”, Sandia National Labs, Albuquerque, NM.
Kolb, G. J., Jones, S. A., and Donnelly, M. W. (2007). “Heliostat cost reduction study.” SAND 2007-3293. 〈http://www.prod.sandia.gov/cgi-bin/techlib/access-control.pl/2007/073293〉.
Kribus, A., Huleihil, M., Timinger, A., and Ben-Mair, R. (2000). “Performance of a rectangular secondary concentrator with an asymmetric heliostat field.” Sol. Energy, 69(2), 139–151.
Kribus, A., Vishnevetsky, I., Yogev, A., and Rubinov, T. (2004). “Closed loop control of heliostats.” Energy, 29(5–6), 905–913.
Leonardi, E., and D’Aguanno, B. (2011). “CRS4-2: A numerical code for the calculation of the solar power collected in a central receiver system.” Energy, 36(8), 4828–4837.
Lipps, F. W., and Vant-Hull, L. L. (1978). “A cell wise method for the optimization of large central receiver systems.” Sol. Energy, 20(6), 505–516.
Mehrabian, M. A., and Aseman, R. D. (2007). “Computer programming to calculate the variations of characteristic angles of heliostats as a function of time and position in a central receiver solar power plant.” Proc., ISES World Congress 2007, D. Y. Goswami, and Y. Zhao, eds., Vol. 1–5, Springer, Berlin Heidelberg, 1894–1898.
Pacheco, J. E., Reilly, H. E., Kolb, G. J., and Tyner, C. E. (2000). “Summary of the solar two: Test and evaluation program.”, Renewable Energy for the New Millennium, Sydney.
Sanchez, M., and Romero, M. (2006). “Methodology for generation of heliostat field layout in central receiver systems based on yearly normalized energy surfaces.” Sol. Energy, 80(7), 861–874.
Schramek, P., Mills, D. R., Stein, W., and Le Lièvre, P. (2009). “Design of the heliostat field of the CSIRO solar tower.” J. Sol. Energy Eng., 131(2), 024505–024511.
Schwarzbozl, Peter, and Eiden, Ulrich (2002). “A TRNSYS model library for solar thermalelectric components (STEC).” A reference manual release 2.2.
Siala, F. M. F., and Elayeb, M. E. (2001). “Mathematical formulation of a graphical method for a no-blocking heliostat field layout.” Renewable Energy, 23(1), 77–92.
Sterns Roger Engineering Company. (1979). “Tower cost data for central receiver studies.”, Albuquerque, NM.
Talebizadeh, P., Mehrabian, M. A., and Abdolzadeh, M. (2011). “Prediction of the optimum slope and surface azimuth angles using the genetic algorithm.” Energy Build., 43(11), 2998–3005.
Vittitoe, C. vN., and Biggs, F. (1978). “Terrestrial propagation loss.” Paper Presented at the American Section, Int. Solar Energy Society Meeting, International SolarEnergy Society and the Solar Energy Society of Canada, Winnipeg.
William, B., Geyer, S., and Geyer, M. (2001). “Power from the Sun.” 〈http://www.powerfromthesun.net〉, (Dec. 18, 2012).
Xiudong, W., Zhenwu, L., Zhifeng, W., Weixing, Y., Hongxing, Z., and Zhihao, Y. (2010). “A new method for the design of the heliostat field layout for solar tower power plant.” Renewable Energy, 35(9), 1970–1975.
Xu, C., Wang, Z., Li, X., and Sun, F. (2011). “Energy and exergy analysis of solar power tower plants.” Appl. Therm. Eng., 31(17–18), 3904–3913.
Xuan, W., Yan-e, L., and Dan, H. (2010). “Solving six-hump camel back function optimization problem by using thermodynamics evolutionary algorithm.” Proc., 2nd Int. Conf. on Networks Security, Wireless Communications and Trusted Computing, Institute of Electrical and Electronics Engineers.
Zhihao, Y., Zhifeng, W., Zhenwu, L., and Xiudong, W. (2009). “Modeling and simulation of the pioneer 1 MW solar thermal central receiver system in China.” Renewable Energy., 34(11), 2437–2446.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 7, 2013
Accepted: Sep 4, 2013
Published online: Sep 6, 2013
Discussion open until: Jul 14, 2014
Published in print: Dec 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.