Development and Validation of New Bouc–Wen Data-Driven Hysteresis Model for Masonry Infilled RC Frames
Publication: Journal of Engineering Mechanics
Volume 147, Issue 11
Abstract
During the last years, several mechanics-based macromodels have been proposed to assess the cyclic response of infilled RC frames. However, the uncertainties behind the assumptions on damage and failure mechanisms compromise the reliability of such approaches. For this reason, this paper proposes a new data-driven hysteresis model for the cyclic response of infilled RC frames. The infill panel is schematized as a single-degree-of-freedom element, whose constitutive law is given by the proposed hysteresis model. The model combines a degrading Bouc–Wen element with a slip-lock element, which is introduced specifically to reproduce the pinching effect due to crack openings in the masonry panel. The parameters governing the model have clear physical meanings and are calibrated on the basis of an experimental data set of cyclic responses of single-story single-bay RC infilled frames. The calibrations are carried out by means of a genetic algorithm–based optimization. Analytical correlation laws linking the model parameters with geometric and mechanical properties of the RC infilled frame are proposed and validated by blind validation tests. Results show adequate accuracy of the model in reproducing the cyclic response of infilled frames characterized by significantly different geometrical and mechanical features. The model is defined by a smooth analytical hysteresis law, with great advantages regarding numerical stability and computational effort. This makes it suitable for dynamic and stochastic simulations.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request, including OpenSees models and MATLAB code.
Acknowledgments
This work was supported by the Italian Ministry of University and Research (MIUR) through the project FISR 2019: “Eco Earth” (Code 00245) and by the National Natural Science Foundation of China (Grant No. 51778148). The authors gratefully acknowledge the College of Civil Engineering of the Fuzhou University (Fujian, China) for the support given throughout this research.
References
Al-Chaar, G., M. Issa, and S. Sweeney. 2002. “Behavior of masonry-infilled nonductile reinforced concrete frames.” J. Struct. Eng. 128 (8): 1055–1063. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1055).
Aloisio, A., R. Alaggio, and M. Fragiacomo. 2021a. “Equivalent viscous damping of cross-laminated timber structural archetypes.” J. Struct. Eng. 147 (4): 04021012. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002947.
Aloisio, A., R. Alaggio, and M. Fragiacomo. 2021b. “Fragility functions and behavior factors estimation of multi-story cross-laminated timber structures characterized by an energy-dependent hysteretic model.” Earthquake Spectra 37 (1): 134–159. https://doi.org/10.1177/8755293020936696.
Aloisio, A., R. Alaggio, J. Köhler, and M. Fragiacomo. 2020. “Extension of generalized Bouc-Wen hysteresis modeling of wood joints and structural systems.” J. Eng. Mech. 146 (3): 04020001. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001722.
Baber, T. T., and M. N. Noori. 1985. “Random vibration of degrading, pinching systems.” J. Eng. Mech. 111 (8): 1010–1026. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:8(1010).
Bergami, A. V., and C. Nuti. 2015. “Experimental tests and global modeling of masonry infilled frames.” Earthquake Struct. 9 (2): 281–303. https://doi.org/10.12989/eas.2015.9.2.281.
Bertoldi, S., L. Decanini, and C. Gavarini. 1993. “Telai tamponati soggetti ad azioni sismiche, un modello semplificato: Confronto sperimentale e numerico.” Atti del 6 (Oct): 815–824.
Bouc, R. 1971. “A mathematical model for hysteresis.” Acta Acust. United Acust. 24 (1): 16–25.
Calvi, G. M., and D. Bolognini. 2001. “Seismic response of reinforced concrete frames infilled with weakly reinforced masonry panels.” J. Earthquake Eng. 5 (2): 153–185. https://doi.org/10.1080/13632460109350390.
Cavaleri, L., and F. Di Trapani. 2014. “Cyclic response of masonry infilled RC frames: Experimental results and simplified modeling.” Soil Dyn. Earthquake Eng. 65 (Oct): 224–242. https://doi.org/10.1016/j.soildyn.2014.06.016.
Cavaleri, L., M. Fossetti, and M. Papia. 2005. “Infilled frames: Developments in the evaluation of cyclic behaviour under lateral loads.” Struct. Eng. Mech. 21 (4): 469–494. https://doi.org/10.12989/sem.2005.21.4.469.
Charalampakis, A. E., and V. K. Koumousis. 2008. “On the response and dissipated energy of Bouc-Wen hysteretic model.” J. Sound Vib. 309 (3–5): 887–895. https://doi.org/10.1016/j.jsv.2007.07.080.
Charalampakis, A. E., and V. K. Koumousis. 2009. “A Bouc-Wen model compatible with plasticity postulates.” J. Sound Vib. 322 (4–5): 954–968. https://doi.org/10.1016/j.jsv.2008.11.017.
Colangelo, F. 2005. “Pseudo-dynamic seismic response of reinforced concrete frames infilled with non-structural brick masonry.” Earthquake Eng. Struct. Dyn. 34 (10): 1219–1241. https://doi.org/10.1002/eqe.477.
Colangelo, F. 2017. “Interaction of axial force and bending moment by using Bouc-Wen hysteresis and stochastic linearization.” Struct. Saf. 67 (Jul): 39–53. https://doi.org/10.1016/j.strusafe.2017.04.003.
Da Porto, F., G. Guidi, M. Dalla Benetta, and N. Verlato. 2013. “Combined in-plane/out-of-plane experimental behaviour of reinforced and strengthened infill masonry walls.” In Proc., 12th Canadian Masonry Symp., 2–5. Mississauga, Canada: Canadian Masonry Design Center.
De Risi, M. T., C. Del Gaudio, P. Ricci, and G. M. Verderame. 2018. “In-plane behaviour and damage assessment of masonry infills with hollow clay bricks in RC frames.” Eng. Struct. 168 (Aug): 257–275. https://doi.org/10.1016/j.engstruct.2018.04.065.
Di Trapani, F., G. Bertagnoli, M. F. Ferrotto, and D. Gino. 2018. “Empirical equations for the direct definition of stress–strain laws for fiber-section-based macromodeling of infilled frames.” J. Eng. Mech. 144 (11): 04018101. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001532.
Di Trapani, F., V. Bolis, F. Basone, and M. Preti. 2020. “Seismic reliability and loss assessment of RC frame structures with traditional and innovative masonry infills.” Eng. Struct. 208 (Apr): 110306. https://doi.org/10.1016/j.engstruct.2020.110306.
Di Trapani, F., and M. Malavisi. 2019. “Seismic fragility assessment of infilled frames subject to mainshock/aftershock sequences using a double incremental dynamic analysis approach.” Bull. Earthquake Eng. 17 (1): 211–235. https://doi.org/10.1007/s10518-018-0445-2.
Di Trapani, F., G. Tomaselli, L. Cavaleri, and G. Bertagnoli. 2021. “Macroelement model for the progressive-collapse analysis of infilled frames.” J. Struct. Eng. 147 (6): 04021079. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003014.
Dolšek, M., and P. Fajfar. 2008. “The effect of masonry infills on the seismic response of a four-storey reinforced concrete frame—A deterministic assessment.” Eng. Struct. 30 (7): 1991–2001. https://doi.org/10.1016/j.engstruct.2008.01.001.
Doudoumis, I., and E. Mitsopoulou. 1986. “Non-linear analysis of multistorey infilled frames for unilateral contact conditions.” In Vol. 3 of Proc., 8th European Conf. on Earthquake Engineering, 63–70. Istanbul, Turkey: European Association for Earthquake Engineering.
Filippou, F. C., V. V. Bertero, and E. P. Popov. 1983. Effects of bond deterioration on hysteretic behavior of reinforced concrete joints. Berkeley, CA: University of California Press.
Foliente, G. C. 1995. “Hysteresis modeling of wood joints and structural systems.” J. Struct. Eng. 121 (6): 1013–1022. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(1013).
Huang, H., H. V. Burton, and S. Sattar. 2020. “Development and utilization of a database of infilled frame experiments for numerical modeling.” J. Struct. Eng. 146 (6): 04020079. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002608.
Hurtado, J. E., and A. H. Barbat. 2000. “Equivalent linearization of the Bouc-Wen hysteretic model.” Eng. Struct. 22 (9): 1121–1132. https://doi.org/10.1016/S0141-0296(99)00056-5.
Ikhouane, F., and J. Rodellar. 2005. “On the hysteretic Bouc-Wen model.” Nonlinear Dyn. 42 (1): 63–78. https://doi.org/10.1007/s11071-005-0069-3.
Kakaletsis, D. J., and C. G. Karayannis. 2008. “Influence of masonry strength and openings on infilled R/C frames under cycling loading.” J. Earthquake Eng. 12 (2): 197–221. https://doi.org/10.1080/13632460701299138.
Kakaletsis, D. J., and C. G. Karayannis. 2009. “Experimental investigation of infilled reinforced concrete frames with openings.” ACI Struct. J. 106 (2): 132–141.
Klingner, R. E., and V. V. Bertero. 1978. “Earthquake resistance of infilled frames.” J. Struct. Div. 104 (6): 973–989. https://doi.org/10.1061/JSDEAG.0004947.
Liberatore, L., F. Noto, F. Mollaioli, and P. Franchin. 2018. “In-plane response of masonry infill walls: Comprehensive experimentally-based equivalent strut model for deterministic and probabilistic analysis.” Eng. Struct. 167 (Jul): 533–548. https://doi.org/10.1016/j.engstruct.2018.04.057.
Ma, F., H. Zhang, A. Bockstedte, G. C. Foliente, and P. Paevere. 2004. “Parameter analysis of the differential model of hysteresis.” J. Appl. Mech. 71 (3): 342–349. https://doi.org/10.1115/1.1668082.
Madan, A., A. M. Reinhorn, J. B. Mander, and R. E. Valles. 1997. “Modeling of masonry infill panels for structural analysis.” J. Struct. Eng. 123 (10): 1295–1302. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1295).
Mansouri, A., M. S. Marefat, and M. Khanmohammadi. 2014. “Experimental evaluation of seismic performance of low-shear strength masonry infills with openings in reinforced concrete frames with deficient seismic details.” Struct. Des. Tall Spec. Build. 23 (15): 1190–1210. https://doi.org/10.1002/tal.1115.
Mehrabi, A. B., P. Benson Shing, M. P. Schuller, and J. L. Noland. 1996. “Experimental evaluation of masonry-infilled RC frames.” J. Struct. Eng. 122 (3): 228–237. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(228).
Morandi, P., S. Hak, and G. Magenes. 2018. “Performance-based interpretation of in-plane cyclic tests on RC frames with strong masonry infills.” Eng. Struct. 156 (Feb): 503–521. https://doi.org/10.1016/j.engstruct.2017.11.058.
Mucedero, G., D. Perrone, E. Brunesi, and R. Monteiro. 2020. “Numerical modelling and validation of the response of masonry infilled RC frames using experimental testing results.” Buildings 10 (10): 182. https://doi.org/10.3390/buildings10100182.
Ok, S. Y., J. Song, and K. S. Park. 2008. “Optimal design of hysteretic dampers connecting adjacent structures using multi-objective genetic algorithm and stochastic linearization method.” Eng. Struct. 30 (5): 1240–1249. https://doi.org/10.1016/j.engstruct.2007.07.019.
Panagiotakos, T., and M. Fardis. 1996. “Seismic response of infilled RC frames structures.” In Proc., 11th World Conf. on Earthquake Engineering. Oxford, UK: Pergamon.
Papia, M., L. Cavaleri, and M. Fossetti. 2003. “Infilled frames: Developments in the evaluation of the stiffening effect of infills.” Struct. Eng. Mech. 16 (6): 675–693. https://doi.org/10.12989/sem.2003.16.6.675.
Park, Y. J., and A. H. S. Ang. 1985. “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Eng. 111 (4): 722–739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722).
Pasca, M., L. Liberatore, and R. Masiani. 2017. “Reliability of analytical models for the prediction of out-of-plane capacity of masonry infills.” Struct. Eng. Mech. 64 (6): 765–781. https://doi.org/10.12989/sem.2017.64.6.765.
Paulay, T., and M. N. Priestley. 1992. Seismic design of reinforced concrete and masonry buildings. New York: Wiley.
Pelliciari, M., B. Briseghella, F. Tondolo, L. Veneziano, C. Nuti, R. Greco, D. Lavorato, and A. M. Tarantino. 2020. “A degrading Bouc–Wen model for the hysteresis of reinforced concrete structural elements.” Struct. Infrastruct. Eng. 16 (7): 917–930. https://doi.org/10.1080/15732479.2019.1674893.
Pelliciari, M., G. C. Marano, T. Cuoghi, B. Briseghella, D. Lavorato, and A. M. Tarantino. 2018. “Parameter identification of degrading and pinched hysteretic systems using a modified Bouc–Wen model.” Struct. Infrastruct. Eng. 14 (12): 1573–1585. https://doi.org/10.1080/15732479.2018.1469652.
Pires, F., and E. C. Carvalho. 1992. “The behaviour of infilled reinforced concrete frames under horizontal cyclic loading.” In Vol. 6 of Proc., 10th World Conf. on Earthquake Engineering, 3419–33422. Rotterdam, Netherlands: A.A. Balkema.
Quaranta, G., W. Lacarbonara, and S. F. Masri. 2020. “A review on computational intelligence for identification of nonlinear dynamical systems.” Nonlinear Dyn. 99 (2): 1709–1761. https://doi.org/10.1007/s11071-019-05430-7.
Saatcioglu, M., and S. Razvi. 1992. “Strength and ductility of confined concrete.” J. Struct. Eng. 118 (6): 1590–1607. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590).
Scott, B. D., R. Park, and M. J. Priestley. 1982. “Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates.” ACI J. Proc. 79 (1): 13–27.
Sengupta, P., and B. Li. 2013. “Modified Bouc-Wen model for hysteresis behavior of RC beam-column joints with limited transverse reinforcement.” Eng. Struct. 46 (Jan): 392–406. https://doi.org/10.1016/j.engstruct.2012.08.003.
Sigmund, V., and D. Penava. 2012. “Experimental study of masonry infilled R/C frames with opening.” In Proc., 15th World Conf. on Earthquake Engineering. Tokyo: International Association for Earthquake Engineering.
Stylianidis, K. 2012. “Experimental investigation of masonry infilled R/C frames.” Open Constr. Build. Technol. J. 6 (1): 194–212. https://doi.org/10.2174/1874836801206010194.
Sues, R. H., S. T. Mau, and Y. K. Wen. 1988. “Systems identification of degrading hysteretic restoring forces.” J. Eng. Mech. 114 (5): 833–846. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:5(833).
Uva, G., D. Raffaele, F. Porco, and A. Fiore. 2012. “On the role of equivalent strut models in the seismic assessment of infilled RC buildings.” Eng. Struct. 42 (Sep): 83–94. https://doi.org/10.1016/j.engstruct.2012.04.005.
Verderame, G., P. Ricci, C. Del Gaudio, and M. De Risi. 2016. “Experimental tests on masonry infilled gravity-and seismic-load designed RC frames.” In Brick and block masonry, 1349–1358. Boca Raton, FL: CRC Press.
Wen, Y. K. 1976. “Method for random vibration of hysteretic systems.” J. Eng. Mech. 102 (2): 249–263.
Whitley, D. 1994. “A genetic algorithm tutorial.” Stat. Comput. 4 (2): 65–85. https://doi.org/10.1007/BF00175354.
Ye, M., and X. Wang. 2007. “Parameter estimation of the Bouc-Wen hysteresis model using particle swarm optimization.” Smart Mater. Struct. 16 (6): 2341. https://doi.org/10.1088/0964-1726/16/6/038.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 13, 2021
Accepted: Jun 21, 2021
Published online: Aug 27, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 27, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Won-Kee Hong, Tien Dat Pham, An AI-based auto-design for optimizing RC frames using the ANN-based Hong–Lagrange algorithm, Journal of Asian Architecture and Building Engineering, 10.1080/13467581.2022.2163174, (1-13), (2023).
- Henry Burton, Causal inference on observational data: Opportunities and challenges in earthquake engineering, Earthquake Spectra, 10.1177/87552930221125492, 39, 1, (54-76), (2022).
- Yi-Hsuan Tu, I-Ting Tung, Tsung-Chih Chiou, In-Plane Loading Tests and a Retrofitting Technique for Masonry Infill Panels in RC Frames with Eccentric Openings, Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0003481, 148, 11, (2022).
- Vasilis Sarhosis, Jose V. Lemos, Katalin Bagi, Gabriele Milani, Recent Advances on the Mechanics of Masonry Structures, Journal of Engineering Mechanics, 10.1061/(ASCE)EM.1943-7889.0002112, 148, 6, (2022).
- Angelo Aloisio, Marco Martino Rosso, Rocco Alaggio, Experimental and Analytical Investigation into the Effect of Ballasted Track on the Dynamic Response of Railway Bridges under Moving Loads, Journal of Bridge Engineering, 10.1061/(ASCE)BE.1943-5592.0001934, 27, 10, (2022).
- Angelo Aloisio, Francesco Boggian, Roberto Tomasi, Design of a novel seismic retrofitting system for RC structures based on asymmetric friction connections and CLT panels, Engineering Structures, 10.1016/j.engstruct.2021.113807, 254, (113807), (2022).
- Angelo Aloisio, Matteo Pelliciari, Stefano Sirotti, Francesco Boggian, Roberto Tomasi, Optimization of the structural coupling between RC frames, CLT shear walls and asymmetric friction connections, Bulletin of Earthquake Engineering, 10.1007/s10518-022-01337-8, 20, 8, (3775-3800), (2022).
- Fabio Di Trapani, A novel data-driven force–displacement macro-model for nonlinear analysis of infilled frames: development, validation and reliability comparison, Bulletin of Earthquake Engineering, 10.1007/s10518-021-01211-z, 19, 14, (6157-6186), (2021).