Particle and Continuum Rotations of Granular Materials: Discrete-Element Method Simulations and Experiment
Publication: Journal of Engineering Mechanics
Volume 147, Issue 11
Abstract
For granular materials, the kinematic degrees of freedom at the microscale of particles are the particles’ displacements and rotations. In classical continuum mechanics, the kinematic degree of freedom at the macroscale is the (local) displacement field. The rotation of a material element is not independent but is determined by the antisymmetric part of the displacement gradient. The objective of this study is to investigate, mainly by means of discrete-element method simulations, whether the average particle rotation is equal to the continuum rotation determined from the average displacement gradient. In the three-dimensional discrete-element method simulations of shear tests (with nonzero average continuum rotation), simulations with and without contact couples have been analyzed. The simulation results show that the average particle rotation is effectively equal to the continuum rotation, over the whole range of strains. Additionally, the results of an X-ray tomography test of a rounded granular soil under triaxial compression are analyzed. The average rotation of soil particles inside shear bands agrees well with the average continuum rotation determined from the particle displacements. Comparison of simulation results with contact couples to those where contact couples were not considered reveals that the presence of contact couples has a significant effect on the stress ratio and on the volumetric strain. The stress tensor is symmetric, even when contact couples are included.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The results of DEM simulations that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The first author acknowledges financial support from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement 832405 (ICARUS). E. Andò and C. Viggiani (Université Grenoble Alpes, France) are thanked for providing the kinematic X-ray tomography data of Caicos ooids, which led to the analyses of average particle and continuum rotations presented in this paper. O. Millet (Université de La Rochelle, France) and F. Nicot (INRAE, France) are thanked for valuable discussions.
References
Agnolin, I., and N. P. Kruyt. 2008. “On the elastic moduli of two-dimensional assemblies of disks: Relevance and modeling of fluctuations in particle displacements and rotations.” Comput. Math. Appl. 55 (2): 245–256. https://doi.org/10.1016/j.camwa.2007.04.015.
Andò, E. 2013. “Experimental investigation of microstructural changes in deforming granular media using x-ray tomography.” Ph.D. thesis, 3SR Grenoble, Université de Grenoble.
Aris, R. 1962. Vectors, tensors, and the basic equations of fluid mechanics. New York: Dover.
Bagi, K. 1996. “Stress and strain in granular assemblies.” Mech. Mater. 22 (3): 165–177. https://doi.org/10.1016/0167-6636(95)00044-5.
Bardet, J., and I. Vardoulakis. 2001. “The asymmetry of stress in granular media.” Int. J. Solids Struct. 38 (2): 353–367. https://doi.org/10.1016/S0020-7683(00)00021-4.
Calvetti, F., G. Combe, and J. Lanier. 1997. “Experimental micromechanical analysis of a 2D granular material: Relation between structure evolution and loading path.” Mech. Cohesive-Frict. Mater. 2 (2): 121–163. https://doi.org/10.1002/(SICI)1099-1484(199704)2:2%3C121::AID-CFM27%3E3.0.CO;2-2.
Cosserat, E., and F. Cosserat. 1909. Théorie des corps deformables. Paris: Hermann et Fils.
Cundall, P. A., and O. D. L. Strack. 1979. “A discrete numerical model for granular assemblies.” Géotechnique 29 (1): 47–65. https://doi.org/10.1680/geot.1979.29.1.47.
Eringen, A. C. 1999. Microcontinuum field theories: Foundations and solids. New York: Springer.
GDR MiDi (Groupement de Recherche Milieux Divisés). 2004. “On dense granular flows.” Eur. Phys. J. E 14 (Aug): 341–365. https://doi.org/10.1140/epje/i2003-10153-0.
Goddard, J. D. 2008. “From granular matter to generalized continuum.” In Vol. 1937 of Mathematical models of granular matter, lecture notes in applied mathematics, edited by G. Capriz, P. Giovine, and P. M. Mariano, 1–20. New York: Springer.
Kozicki, J., and J. Tejchman. 2016. “DEM investigations of two-dimensional granular vortex- and anti-vortex-structures during plane strain compression.” Granular Matter 18 (2): 20. https://doi.org/10.1007/s10035-016-0627-z.
Kozicki, J., and J. Tejchman. 2018. “Relationship between vortex structures and shear localization in 3D granular specimens based on combined DEM and Helmholtz–Hodge decomposition.” Granular Matter 20 (3): 1–24. https://doi.org/10.1007/s10035-018-0815-0.
Kruyt, N. P. 2003. “Statics and kinematics of discrete Cosserat-type granular materials.” Int. J. Solids Struct. 40 (3): 511–534. https://doi.org/10.1016/S0020-7683(02)00624-8.
Kruyt, N. P. 2012. “Micromechanical study of fabric evolution in quasi-static deformation of granular materials.” Mech. Mater. 44 (Jan): 120–129. https://doi.org/10.1016/j.mechmat.2011.07.008.
Kruyt, N. P., O. Millet, and F. Nicot. 2014. “Macroscopic strains in granular materials accounting for grain rotations.” Granular Matter 16 (6): 933–944. https://doi.org/10.1007/s10035-014-0523-3.
Kruyt, N. P., and L. Rothenburg. 1996. “Micromechanical definition of the strain tensor for granular materials.” J. Appl. Mech. 63 (3): 706–711. https://doi.org/10.1115/1.2823353.
Kruyt, N. P., and L. Rothenburg. 1998. “Statistical theories for the elastic moduli of two-dimensional assemblies of granular materials.” Int. J. Eng. Sci. 36 (10): 1127–1142. https://doi.org/10.1016/S0020-7225(98)00003-2.
Kruyt, N. P., and L. Rothenburg. 2002. “Micromechanical bounds for the effective elastic moduli of granular materials.” Int. J. Solids Struct. 39 (2): 311–324. https://doi.org/10.1016/S0020-7683(01)00200-1.
Kruyt, N. P., and L. Rothenburg. 2016. “A micromechanical study of dilatancy of granular materials.” J. Mech. Phys. Solids 95 (Oct): 411–427. https://doi.org/10.1016/j.jmps.2016.01.019.
Kuhn, M. R., and K. Bagi. 2004. “Contact rolling and deformation in granular media.” Int. J. Solids Struct. 41 (21): 5793–5820. https://doi.org/10.1016/j.ijsolstr.2004.05.066.
Misra, A., and H. Jiang. 1997. “Measured kinematic fields in the biaxial shear of granular materials.” Comput. Geotech. 20 (3–4): 267–285. https://doi.org/10.1016/S0266-352X(97)00006-2.
Mühlhaus, H. B., and I. Vardoulakis. 1987. “The thickness of shear bands in granular materials.” Géotechnique 37 (3): 271–283. https://doi.org/10.1680/geot.1987.37.3.271.
Oda, M., and K. Iwashita. 2000. “Study on couple stress and shear band development in granular media based on numerical simulation analyses.” Int. J. Eng. Sci. 38 (15): 1713–1740. https://doi.org/10.1016/S0020-7225(99)00132-9.
Poorsolhjouy, P., and A. Misra. 2019. “Granular micromechanics based continuum model for grain rotations and grain rotation waves.” J. Mech. Phys. Solids 129 (Aug): 244–260. https://doi.org/10.1016/j.jmps.2019.05.012.
Radjai, F., J.-Y. Delenne, E. Azéma, and S. Roux. 2012. “Fabric evolution and accessible geometrical states in granular materials.” Granular Matter 14 (2): 259–264. https://doi.org/10.1007/s10035-012-0321-8.
Rorato, R., M. Arroyo, E. Andò, A. Gens, and G. Viggiani. 2020. “Linking shape and rotation of grains during triaxial compression of sand.” Granular Matter 22 (4): 1–21. https://doi.org/10.1007/s10035-020-01058-2.
Rorato, R., M. Arroyo, A. Gens, E. Andò, and G. Viggiani. 2021. “Image-based calibration of rolling resistance in discrete element models of sand.” Comput. Geotech. 131 (4): 103929. https://doi.org/10.1016/j.compgeo.2020.103929.
Rothenburg, L., and R. J. Bathurst. 1989. “Analytical study of induced anisotropy in idealized granular materials.” Géotechnique 39 (4): 601–614. https://doi.org/10.1680/geot.1989.39.4.601.
Šmilauer, V., et al. 2015. “Yade documentation.” Accessed November 20, 2015. http://yade-dem.org/doc/.
Tejchman, J., and E. Bauer. 1996. “Numerical simulation of shear band formation with a polar hypoplastic constitutive model.” Comput. Geotech. 19 (3): 221–244. https://doi.org/10.1016/0266-352X(96)00004-3.
Thornton, C. 2000. “Numerical simulations of deviatoric shear deformation of granular media.” Géotechnique 50 (1): 43–53. https://doi.org/10.1680/geot.2000.50.1.43.
Tordesillas, A., S. Pucilowski, Q. Lin, J. Peters, and R. Behringer. 2016. “Granular vortices: Identification, characterization and conditions for the localization of deformation.” J. Mech. Phys. Solids 90 (May): 215–241. https://doi.org/10.1016/j.jmps.2016.02.032.
Tordesillas, A., S. Pucilowski, J. Peters, and L. Walizer. 2014. “Micromechanics of vortices in granular media: Connection to shear bands and implications for continuum modelling of failure in geomaterials.” Int. J. Numer. Anal. Methods Geomech. 38 (12): 247–1275. https://doi.org/10.1002/nag.2258.
Turco, E., F. Dell’Isola, and A. Misra. 2019. “A nonlinear Lagrangian particle model for grains assemblies including grain relative rotations.” Int. J. Numer. Anal. Methods Geomech. 43 (5): 1051–1079. https://doi.org/10.1002/nag.2915.
Zhang, L., N. Nguyen, S. Lambert, F. Nicot, F. Prunier, and I. Djeran-Maigre. 2017. “The role of force chains in granular materials: From statics to dynamics.” Eur. J. Environ. Civ. Eng. 21 (7–8): 874–895. https://doi.org/10.1080/19648189.2016.1194332.
Zhang, W., J. Wang, and M. Jiang. 2013. “DEM-aided discovery of the relationship between energy dissipation and shear band formation considering the effects of particle rolling resistance.” J. Geotech. Geoenviron. Eng. 139 (9): 1512–1527. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000890.
Zhao, C.-F., and N. P. Kruyt. 2020. “An evolution law for fabric anisotropy and its application in micromechanical modelling of granular materials.” Int. J. Solids Struct. 196 (Jul): 53–66. https://doi.org/10.1016/j.ijsolstr.2020.04.007.
Zhao, C.-F., G. Pinzón, M. Wiebicke, E. Andò, N. P. Kruyt, and G. Viggiani. 2021. “Evolution of fabric anisotropy of granular soils: X-ray tomography measurements and theoretical modelling.” Comput. Geotech. 133 (May): 104046. https://doi.org/10.1016/j.compgeo.2021.104046.
Zhao, S., T. Evans, and X. Zhou. 2018. “Shear-induced anisotropy of granular materials with rolling resistance and particle shape effects.” Int. J. Solids Struct. 150 (Oct): 268–281. https://doi.org/10.1016/j.ijsolstr.2018.06.024.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 147 • Issue 11 • November 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Feb 22, 2021
Accepted: Jun 10, 2021
Published online: Aug 24, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.