Probabilistic Model Based on Bayesian Model Averaging for Predicting the Plastic Hinge Lengths of Reinforced Concrete Columns
Publication: Journal of Engineering Mechanics
Volume 147, Issue 10
Abstract
A probabilistic model is devised for predicting the plastic hinge lengths (PHLs) of RC columns. Seven existing parametric models are evaluated first using a comprehensive database comprising PHL measurements from 133 RC column tests. It is observed that the performances of these seven models are fair (as opposed to strong), and their predictions bear significant uncertainties. A novel technique is devised to combine them into a weighted-average supermodel wherein the weights are determined via Bayesian inference. This approach naturally produces the weights’ statistical moments, and thus, the resulting model is a probabilistic one that is amenable for performance-based seismic design and assessment analyses. Prediction comparisons indicate that the proposed supermodel has a higher performance than all prior models. The new model is easily expandable should more test data become available.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
The authors would like to acknowledge financial support from the National Natural Science Foundation of China (Grant No. 52078119), which enabled the first and second authors to spend terms as Visiting Scholars at UCLA.
References
Bae, S., and O. Bayrak. 2008. “Plastic hinge length of reinforced concrete columns.” ACI Struct. J. 105 (3): 290–300.
Barrera, A. C., J. Bonet, M. Romero, and P. Miguel. 2011. “Experimental tests of slender reinforced concrete columns under combined axial load and lateral force.” Eng. Struct. 33 (12): 3676–3689. https://doi.org/10.1016/j.engstruct.2011.08.003.
Beck, J. L. 2010. “Bayesian system identification based on probability logic.” Struct. Control Health Monit. 17 (7): 825–847.
Berry, M. P., D. E. Lehman, and L. N. Lowes. 2008. “Lumped-plasticity models for performance simulation of bridge columns.” ACI Struct. J. 105 (3): 270–279.
Dormann, C. F., et al. 2018. “Model averaging in ecology: A review of Bayesian, information-theoretic, and tactical approaches for predictive inference.” Ecol. Monogr. 88 (4): 485–504. https://doi.org/10.1002/ecm.1309.
Elmenshawi, A., T. Brown, and S. El-Metwally. 2012. “Plastic hinge length considering shear reversal in reinforced concrete elements.” J. Earthquake Eng. 16 (2): 188–210. https://doi.org/10.1080/13632469.2011.597485.
Feng, D. C., X. D. Ren, and J. Li. 2016. “Implicit gradient delocalization method for force-based frame element.” J. Struct. Eng. 142 (2): 04015122. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001397.
Feng, D.-C., B. Cetiner, M. Reza Azadi Kakavand, and E. Taciroglu. 2021. “Data-driven approach to predict the plastic hinge length of reinforced concrete columns and its application.” J. Struct. Eng. 147 (2): 04020332. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002852.
Feng, D.-C., Z.-T. Liu, X.-D. Wang, Y. Chen, J.-Q. Chang, D.-F. Wei, and Z.-M. Jiang. 2020a. “Machine learning-based compressive strength prediction for concrete: An adaptive boosting approach.” Constr. Build. Mater. 230 (Jan): 117000. https://doi.org/10.1016/j.conbuildmat.2019.117000.
Feng, D.-C., Z.-T. Liu, X.-D. Wang, Z.-M. Jiang, and S.-X. Liang. 2020b. “Failure mode classification and bearing capacity prediction for reinforced concrete columns based on ensemble machine learning algorithm.” Adv. Eng. Inf. 45 (Aug): 101126. https://doi.org/10.1016/j.aei.2020.101126.
Feng, D.-C., and X.-D. Ren. 2017. “Enriched force-based frame element with evolutionary plastic hinge.” J. Struct. Eng. 143 (10): 06017005. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001871.
Feng, D.-C., G. Wu, and C.-L. Ning. 2019. “A regularized force-based Timoshenko fiber element including flexure-shear interaction for cyclic analysis of RC structures.” Int. J. Mech. Sci. 160 (Sep): 59–74. https://doi.org/10.1016/j.ijmecsci.2019.06.011.
Feng, D.-C., S.-C. Xie, J. Xu, and K. Qian. 2020c. “Robustness quantification of reinforced concrete structures subjected to progressive collapse via the probability density evolution method.” Eng. Struct. 202 (Jan): 109877. https://doi.org/10.1016/j.engstruct.2019.109877.
Friedman, J., T. Hastie, and R. Tibshirani. 2001. The elements of statistical learning. Springer series in statistics. New York: Springer.
Goller, B., J. L. Beck, and G. I. Schuëller. 2012. “Evidence-based identification of weighting factors in Bayesian model updating using modal data.” J. Eng. Mech. 138 (5): 430–440. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000351.
Guan, X., R. Jha, and Y. Liu. 2011. “Model selection, updating, and averaging for probabilistic fatigue damage prognosis.” Struct. Saf. 33 (3): 242–249. https://doi.org/10.1016/j.strusafe.2011.03.006.
Hastings, W. K. 1970. “Monte Carlo sampling methods using Markov chains and their applications.” Biometrika 57 (1): 97–109. https://doi.org/10.1093/biomet/57.1.97.
Hoeting, J. A., D. Madigan, A. E. Raftery, and C. T. Volinsky. 1999. “Bayesian model averaging: A tutorial.” Stat. Sci. 14 (4): 382–401.
Jang, J., and A. Smyth. 2017. “Bayesian model updating of a full-scale finite element model with sensitivity-based clustering.” Struct. Control Health Monit. 24 (11): e2004. https://doi.org/10.1002/stc.2004.
Kakavand, M. R. A., and R. Allahvirdizadeh. 2019. “Enhanced empirical models for predicting the drift capacity of less ductile RC columns with flexural, shear, or axial failure modes.” Front. Struct. Civ. Eng. 13 (5): 1251–1270. https://doi.org/10.1007/s11709-019-0554-2.
Lam, H.-F., J.-H. Yang, and S.-K. Au. 2018. “Markov chain Monte Carlo-based Bayesian method for structural model updating and damage detection.” Struct. Control Health Monit. 25 (4): e2140. https://doi.org/10.1002/stc.2140.
Li, H., C. X. Mao, and J. P. Ou. 2013. “Identification of hysteretic dynamic systems by using hybrid extended Kalman filter and wavelet multiresolution analysis with limited observation.” J. Eng. Mech. 139 (5): 547–558. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000510.
Lu, Y., X. Gu, and J. Guan. 2005. “Probabilistic drift limits and performance evaluation of reinforced concrete columns.” J. Struct. Eng. 131 (6): 966–978. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:6(966).
Ning, C.-L., and B. Li. 2015. “Probabilistic approach for estimating plastic hinge length of reinforced concrete columns.” J. Struct. Eng. 142 (3): 04015164. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001436.
Ning, C.-L., and B. Li. 2017. “Probabilistic development of shear strength model for reinforced concrete squat walls.” Earthquake Eng. Struct. Dyn. 46 (6): 877–897. https://doi.org/10.1002/eqe.2834.
Ning, C.-L., and B. Li. 2018. “Analytical probabilistic model for shear strength prediction of reinforced concrete beams without shear reinforcement.” Adv. Struct. Eng. 21 (2): 171–184. https://doi.org/10.1177/1369433217713924.
Panagiotakos, T. B., and M. N. Fardis. 2001. “Deformations of reinforced concrete members at yielding and ultimate.” ACI Struct. J. 98 (2): 135–148.
Park, R., M. Priestley, and W. D. Gill. 1982. “Ductility of square-confined concrete columns.” J. Struct. Div. 108 (4): 929–950. https://doi.org/10.1061/JSDEAG.0005933.
Paulay, T., and M. N. Priestley. 1992. Seismic design of reinforced concrete and masonry buildings. New York: Wiley.
Priestley, M., and R. Park. 1987. “Strength and ductility of concrete bridge columns under seismic loading.” ACI Struct. J. 84 (1): 61–76.
Raftery, A. E., T. Gneiting, F. Balabdaoui, and M. Polakowski. 2005. “Using Bayesian model averaging to calibrate forecast ensembles.” Mon. Weather Rev. 133 (5): 1155–1174. https://doi.org/10.1175/MWR2906.1.
Scott, M., and O. Hamutçuoğlu. 2008. “Numerically consistent regularization of force-based frame elements.” Int. J. Numer. Methods Eng. 76 (10): 1612–1631. https://doi.org/10.1002/nme.2386.
Sheikh, S. A., and S. S. Khoury. 1993. “Confined concrete columns with stubs.” ACI Struct. J. 90 (4): 414–431.
Sheikh, S. A., D. V. Shah, and S. S. Khoury. 1994. “Confinement of high-strength concrete columns.” ACI Struct. J. 91 (1): 100–111.
Shirzad, N., M. Mahsuli, F. Ghahari, and E. Taciroglu. 2018. “Bayesian identification of soil-foundation stiffness of building structures.” Struct. Control Health Monit. 25 (3): e2090. https://doi.org/10.1002/stc.2090.
Soyoz, S., M. Q. Feng, and M. Shinozuka. 2010. “Structural reliability estimation with vibration-based identified parameters.” J. Eng. Mech. 136 (1): 100–106. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000066.
Steel, M. F. J. 2020. “Model averaging and its use in economics.” J. Econ. Lit. 58 (3): 644–719.
Tanaka, H. 1990. “Effect of lateral confining reinforcement on the ductile behaviour of reinforced concrete columns.” Ph.D. thesis, College of Engineering, Univ. of Canterbury.
Wasserman, L. 2000. “Bayesian model selection and model averaging.” J. Math. Psychol. 44 (1): 92–107. https://doi.org/10.1006/jmps.1999.1278.
Yang, K., Q. X. Shi, and J. H. Zhao. 2013. “Plastic hinge length of high strength concrete columns confined by high strength stirrups.” [In Chinese.] Eng. Mech. 30 (2): 254–259.
Zhang, J., C. Wan, and T. Sato. 2013. “Advanced Markov chain Monte Carlo approach for finite element calibration under uncertainty.” Comput.-Aided Civ. Infrastruct. Eng. 28 (7): 522–530. https://doi.org/10.1111/j.1467-8667.2012.00802.x.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 5, 2021
Accepted: Apr 26, 2021
Published online: Jul 26, 2021
Published in print: Oct 1, 2021
Discussion open until: Dec 26, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Shi-Zhi Chen, Shu-Ying Zhang, De-Cheng Feng, Ertugrul Taciroglu, Embedding Prior Knowledge into Data-Driven Structural Performance Prediction to Extrapolate from Training Domains, Journal of Engineering Mechanics, 10.1061/JENMDT.EMENG-7062, 149, 12, (2023).
- Shi‐Zhi Chen, De‐Cheng Feng, Multifidelity approach for data‐driven prediction models of structural behaviors with limited data, Computer-Aided Civil and Infrastructure Engineering, 10.1111/mice.12817, 37, 12, (1566-1581), (2022).
- Shi-Zhi Chen, De-Cheng Feng, Wen-Jie Wang, Ertugrul Taciroglu, Probabilistic Machine-Learning Methods for Performance Prediction of Structure and Infrastructures through Natural Gradient Boosting, Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0003401, 148, 8, (2022).
- Xiaowei Wang, Ram K. Mazumder, Babak Salarieh, Abdullahi M. Salman, Abdollah Shafieezadeh, Yue Li, Machine Learning for Risk and Resilience Assessment in Structural Engineering: Progress and Future Trends, Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0003392, 148, 8, (2022).
- Hai-Bin Huang, Ting-Hua Yi, Hong-Nan Li, Hua Liu, Sparse Bayesian Identification of Temperature-Displacement Model for Performance Assessment and Early Warning of Bridge Bearings, Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0003354, 148, 6, (2022).
- Zihao Ding, Shixiong Zheng, Bo Yu, Probabilistic prediction and calibration for residual shear strength of corroded reinforced concrete columns, Journal of Building Engineering, 10.1016/j.jobe.2021.103901, 48, (103901), (2022).
- Shi-Zhi Chen, Qiang-Ming Zhong, Shi-Tong Hou, Gang Wu, Two-stage stochastic model updating method for highway bridges based on long-gauge strain sensing, Structures, 10.1016/j.istruc.2022.01.082, 37, (1165-1182), (2022).
- Miao Tang, Hui Zeng, Kang Wang, Bayesian Water Quality Evaluation Model Based on Generalized Triangular Fuzzy Number and its Application, Environmental Processes, 10.1007/s40710-022-00562-2, 9, 1, (2022).