Experimentally-Verified Micromechanical Model of MR Gels Based on Planar Current Loop Model
Publication: Journal of Engineering Mechanics
Volume 147, Issue 8
Abistract
As one of the most promising smart materials, magnetorheological (MR) gels have been widely applied in the vibration mitigation of engineering structures. An accurate and effective model for MR gels is of great significance for its in-depth research and engineering application. Existing models for MR materials mainly follow the magnetic dipole theory used for MR fluid, but this theory takes no account of the particle size and, thus, cannot apply to MR gels with a relatively higher volume fraction of particles. In this paper, a micromechanical model for MR gels was proposed and experimentally verified based on the planar current loop model. Firstly, high-performance MR gels were prepared, and basic performance characterizations, including the magnetization property and the sedimentation stability, were carried out. Then the magnetic energy of particles calculated by the magnetic dipole model and the planar current loop model were compared, and the micromechanical model of MR gels was proposed based on the planar current loop model. In the parameter determination process, the data obtained by magnetization tests of the particles were fitted to form the magnetization curve with higher accuracy. Finally, the yield shear stresses of the prepared MR gels were obtained by property tests, and the effectiveness and accuracy of the proposed micromechanical model were verified by comparing the test data with the theoretical values calculated by the proposed model.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was financially supported by the National Science Fund for Distinguished Young Scholars with Grant No. 51625803, the Program of Chang Jiang Scholars of the Ministry of Education, the Tencent Foundation through the XPLORER PRIZE, and the Distinguished Professor for Jiangsu Province. The support from these groups is gratefully acknowledged.
References
Anupama, A. V., V. Kumaran, and B. Sahoo. 2018. “Magneto-mechanical response of additive-free Fe-based magnetorheological fluids: Role of particle shape and magnetic properties.” Mater. Res. Express 5 (8): 085703395. https://doi.org/10.1088/2053-1591/aaabcc.
Bastola, A. K., M. Paudel, L. Li, and W. Li. 2020. “Recent progress of magnetorheological elastomers: A review.” Smart Mater. Struct. 29 (12): 123002. https://doi.org/10.1088/1361-665X/abbc77.
Bitman, L., Y. T. Choi, and N. M. Wereley. 2002. “Electrorheological damper analysis using an Eyring constitutive relationship.” J. Intell. Mater. Syst. Struct. 13 (10): 633–639. https://doi.org/10.1177/1045389X02013010005.
Bustamante, R., M. H. B. M. Shariff, and M. Hossain. 2021. “Mathematical formulations for elastic magneto-electrically coupled soft materials at finite strains: Time-independent processes.” Int. J. Eng. Sci. 159 (Feb): 103429. https://doi.org/10.1016/j.ijengsci.2020.103429.
Cantera, M. A., M. Behrooz, R. F. Gibson, and F. Gordaninejad. 2017. “Modeling of magneto-mechanical response of magnetorheological elastomers (MRE) and MRE-based systems: A review.” Smart Mater. Struct. 26 (2): 023001. https://doi.org/10.1088/1361-665X/aa549c.
Carlson, J. D., and M. R. Jolly. 2000. “MR fluid, foam and elastomer devices.” Mechatronics 10 (4–5): 555–569. https://doi.org/10.1016/S0957-4158(99)00064-1.
Chi, C. Q. 2011. The physical basis and application of ferrofluid. Beijing: Beihang University Press.
Ghaffari, A., S. H. Hashemabadi, and M. Ashtiani. 2015. “A review on the simulation and modeling of MR fluids.” J. Intell. Mater. Syst. Struct. 26 (8): 881–904. https://doi.org/10.1177/1045389X14546650.
Kim, K. J., C. W. Lee, and J. H. Koo. 2008. “Design and modeling of semi-active squeeze film dampers using magneto-rheological fluids.” Smart Mater. Struct. 17 (3): 035006. https://doi.org/10.1088/0964-1726/17/3/035006.
Lara-Prieto, V., R. Parkin, M. Jackson, V. Silberschmidt, and Z. Kęsy. 2009. “Vibration characteristics of MR cantilever sandwich beams: Experimental study.” Smart Mater. Struct. 19 (1): 015005. https://doi.org/10.1088/0964-1726/19/1/015005.
Morillas, J. R., and J. de Vicente. 2020. “Magnetorheology: A review.” Soft Matter 16 (42): 9614–9642. https://doi.org/10.1039/D0SM01082K.
Pang, H. M. 2018. “Study on optimization design and applications of magnetorheological plastomers.” Ph.D. thesis, Univ. of Science and Technology of China.
Peng, X., and H. Li. 2007. “Analysis of the magnetomechanical behavior of MR fluids based on micromechanics incorporating a statistical approach.” Smart Mater. Struct. 16 (6): 2477–2485. https://doi.org/10.1088/0964-1726/16/6/051.
Prashant, S., H. Mokarram, and S. Paul. 2013. “A theory of finite deformation magneto-viscoelasticity.” Int. J. Solids Struct. 50 (24): 3886–3897. https://doi.org/10.1016/j.ijsolstr.2013.07.024.
Richter, L., L. Zipser, and U. Lange. 2001. “Properties of magnetorheologic fluids.” Sens. Mater. 13 (7): 385–397.
Shen, Y., M. F. Golnaraghi, and G. R. Heppler. 2004. “Experimental research and modeling of magnetorheological elastomers.” J. Intell. Mater. Syst. Struct. 15 (1): 27–35. https://doi.org/10.1177/1045389X04039264.
Son, J. K. 2018. “A discrete element model for the influence of surfactants on sedimentation characteristics of magnetorheological fluids.” Korea-Aust. Rheol. J. 30 (1): 29–39. https://doi.org/10.1007/s13367-018-0004-z.
Vicente, J. D., D. J. Klingenberg, and R. Hidalgoalvarez. 2011. “Magnetorheological fluids: A review.” Soft Matter 7 (8): 3701–3710. https://doi.org/10.1039/c0sm01221a.
Xie, L., Y. T. Choi, C. R. Liao, and N. M. Wereley. 2016. “Long term stability of magnetorheological fluids using high viscosity linear polysiloxane carrier fluids.” Smart Mater. Struct. 25 (7): 075006. https://doi.org/10.1088/0964-1726/25/7/075006.
Xing, Z., J. G. Lv, and M. Li. 2005. “Characteristic analysis and experimental study of magnetorheological fluids.” Magn. Mater. Devices 36 (3): 21–23. https://doi.org/10.3969/j.issn.1001-3830.2005.03.007.
Xu, F. H., Z. D. Xu, X. C. Zhang, Y. Q. Guo, and Y. Lu. 2016. “A compact experimentally validated model of magnetorheological fluids.” J. Vib. Acoust. 138 (1): 011017. https://doi.org/10.1115/1.4031757.
Xu, Z. D., and B. B. Chen. 2016. “Experimental and numerical study on magnetorheological fluids based on mixing coated magnetic particles.” J. Mater. Civ. Eng. 28 (5): 04015198. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001473.
Xu, Z. D., M. Xu, and C. L. Sun. 2018. “Performance tests and microchain model validation of a novel kind of MR fluid with GO-coated iron particles.” J. Mater. Civ. Eng. 30 (5): 04018072. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002253.
Xuan, S. H., Y. G. Xu, T. X. Liu, and X. L. Gong. 2015. “Recent progress on the magnetorheological plastomers.” Int. J. Smart Nano Mater. 6 (2): 135–148. https://doi.org/10.1080/19475411.2015.1062437.
Zhang, W., X. Gong, and L. Chen. 2010. “A gaussian distribution model of anisotropic magnetorheological elastomers.” J. Magn. Magn. Mater. 322 (23): 3797–3801. https://doi.org/10.1016/j.jmmm.2010.08.004.
Zubareva, A. Y., L. Y. Iskakovaa, and M. T. Lopez-Lopezb. 2016. “Towards a theory of mechanical properties of ferrogels: Effect of chain-like aggregates.” Physica A 455 (Aug): 98–103. https://doi.org/10.1016/j.physa.2016.03.009.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 24, 2020
Accepted: Mar 5, 2021
Published online: May 22, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 22, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.