Accurate Response Sensitivity Analysis of a Thermomechanical Constitutive Model for Superelastic SMAs
Publication: Journal of Engineering Mechanics
Volume 147, Issue 5
Abstract
Superelastic shape memory alloys (SMAs) have attracted considerable interest in the field of earthquake engineering recently due to their excellent self-centering and moderate energy dissipating capabilities. This unique feature provides promising solutions that can be used in the passive control of structures under strong earthquakes. However, the hysteresis properties of the SMAs have a great influence on the response of the structures. A prominent problem of most previous SMA constitutive models is that they do not consider the strain-rate-dependent effect, especially the mechanical behavior in the typical frequency range of interest for seismic applications. Moreover, the variability effect of the SMA’s hysteresis parameters on the performance in seismic applications is not addressed comprehensively. For this reason, it is important to explore the response sensitivity analysis of an improved SMA constitutive model and gain insight into the effects of various thermomechanical parameters. This paper presents an efficient and accurate sensitivity analysis method for the strain-rate-dependent model of SMAs based on the direct differentiation method (DDM). The constitutive model of SMAs involves three coupled quantities, i.e., stress, martensite fraction, and temperature. The model is expressed numerically using the first-order ordinary differential equations and is solved by the fourth-order Runge–Kutta method. Both the consistent tangent modulus and the stress sensitivity of the SMAs are derived and integrated into the DDM framework. The newly developed algorithms are implemented in a general nonlinear finite element analysis program, OpenSees, and are further verified by the time history analyses of a multi-story steel frame designed with SMA braces. The results demonstrate that the developed DDM-based sensitivity algorithm is accurate and efficient and can provide an excellent solution to the response sensitivity analysis of the thermomechanical strain-rate-dependent model of SMAs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All models used during the study appear in the submitted manuscript. Some data and code generated in this manuscript are available from the corresponding author upon reasonable request.
Acknowledgments
The authors acknowledge the financial supports from the Scientific Research Fund of Institute of Engineering Mechanics, China Earthquake Administration under Grant No. 2019EEEVL0503, National Science Foundation of China under Grant Nos. 51261120376, 51978591, and 51578473, and the State Key Lab of Subtropical Building Science (South China University of Technology, Grant No. 2020ZA06). The findings and opinions expressed in this paper are those of the authors and do not represent the views of the sponsors.
References
ASTM. 2020. Standard specification for structural steel shapes. ASTM A992/A992M. West Conshohocken, PA: ASTM.
Auricchio, F., D. Fugazza, and R. DesRoches. 2008. “Rate-dependent thermo-mechanical modelling of superelastic shape-memory alloys for seismic applications.” J. Intell. Mater. Syst. Struct. 19 (1): 47–61. https://doi.org/10.1177/1045389X06073426.
Brinson, L. C. 1993. “One-dimensional constitutive behavior of shape memory alloys: Thermomechanical derivation with non-constant material functions and redefined martensite internal variable.” J. Intell. Mater. Syst. Struct. 4 (2): 229–242. https://doi.org/10.1177/1045389X9300400213.
Butcher, J. C. 1987. “The numerical analysis of ordinary differential equations: Runge-Kutta and general linear methods.” SIAM Rev. 31 (4): 693. https://doi.org/10.1137/1031147.
Conte, J. P., P. K. Vijalapura, and M. Meghella. 2003. “Consistent finite-element response sensitivity analysis.” J. Eng. Mech. 129 (12): 1380–1393. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:12(1380).
DesRoches, R., J. McCormick, and M. Delemont. 2004. “Cyclic properties of superelastic shape memory alloy wires and bars.” J. Struct. Eng. 130 (1): 38–46. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(38).
Ditlevsen, O., and H. O. Madsen. 1996. Structural reliability methods. New York: Wiley.
Dolce, M., and D. Cardone. 2001. “Mechanical behaviour of shape memory alloys for seismic applications—2. Austenite NiTi wires subjected to tension.” Int. J. Mech. Sci. 43 (11): 2657–2677. https://doi.org/10.1016/S0020-7403(01)00050-9.
Dolce, M., D. Cardone, and F. C. Ponzo. 2007. “Shaking-table tests on reinforced concrete frames with different isolation systems.” Earthquake Eng. Struct. Dyn. 36 (5): 573–596. https://doi.org/10.1002/eqe.642.
Fang, C., W. Wang, A. Zhang, R. Sause, J. Ricles, and Y. Chen. 2019. “Behavior and design of self-centering energy dissipative devices equipped with superelastic SMA ring springs.” J. Struct. Eng. 145 (10): 04019109. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002414.
Gao, Y. C., Q. Gu, Z. J. Qiu, and J. T. Wang. 2016. “Seismic response sensitivity analysis of coupled dam-reservoir-foundation systems.” J. Eng. Mech. 142 (1): 04016070. https://doi.org/10.1061/(ASCE)Em.1943-7889.0001124.
Graesser, E. J., and F. A. Cozzarelli. 1991. “Shape-memory alloys as new materials for aseismic isolation.” J. Eng. Mech. 117 (11): 2590–2608. https://doi.org/10.1061/(ASCE)0733-9399(1991)117:11(2590).
Gu, Q., M. Barbato, and J. P. Conte. 2009. “Handling of constraints in finite-element response sensitivity analysis.” J. Eng. Mech. 135 (12): 1427–1438. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000053.
Haukaas, T., and A. D. Kiureghian. 2006. “Strategies for finding the design point in non-linear finite element reliability analysis.” Prob. Eng. Mech. 21 (2): 133–147. https://doi.org/10.1016/j.probengmech.2005.07.005.
Kleiber, M., H. Antunez, T. D. Hien, and P. Kowalczyk. 1997. Parameter sensitivity in nonlinear mechanics: Theory and finite element computations. New York: Wiley.
LeVeque, R. J. 2007. Finite difference methods for ordinary and partial differential equations: Steady-state and time-dependent problems. Seattle: Univ. of Washington. https://doi.org/10.1137/1.9780898717839.
Li, H., C. X. Mao, and J. P. Ou. 2008. “Experimental and theoretical study on two types of shape memory alloy devices.” Earthquake Eng. Struct. Dyn. 37 (3): 407–426. https://doi.org/10.1002/eqe.761.
Liang, C., and C. A. Rogers. 1990. “One-dimensional thermomechanical constitutive relations for shape memory materials.” J. Intell. Mater. Syst. Struct. 8 (4): 285–302. https://doi.org/10.1177/1045389X9700800402.
Mckenna, F., G. L. Fenves, and M. H. Scott. 2000. Open system for earthquake engineering simulation (OpenSees). Berkeley, CA: Pacific Earthquake Engineering Research Center.
Prahlad, H., and I. Chopra. 2003. “Development of a strain-rate dependent model for uniaxial loading of SMA wires.” J. Intell. Mater. Syst. Struct. 14 (7): 429–442. https://doi.org/10.1177/1045389X03034930.
Qiu, C. X., and S. Y. Zhu. 2016. “High-mode effects on seismic performance of multi-story self-centering braced steel frames.” J. Constr. Steel Res. 119 (1): 133–143. https://doi.org/10.1016/j.jcsr.2015.12.008.
Qiu, C. X., and S. Y. Zhu. 2017. “Shake table test and numerical study of self-centering steel frame with SMA braces.” Earthquake Eng. Struct. Dyn. 46 (1): 117–137. https://doi.org/10.1002/eqe.2777.
Ren, W. J., H. N. Li, and G. B. Song. 2007. “A one-dimensional strain-rate-dependent constitutive model for superelastic shape memory alloys.” Smart Mater. Struct. 16 (1): 191–197. https://doi.org/10.1088/0964-1726/16/1/023.
Scott, M. H., P. Franchin, G. L. Fenves, and F. C. Filippou. 2004. “Response sensitivity for nonlinear beam-column elements.” J. Struct. Eng. 130 (9): 1281–1288. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:9(1281).
Tanaka, K. 1986. “A thermomechanical sketch of shape memory effect: One-dimensional tensile behavior.” Res Mech. 18 (3): 251–263.
Tobushi, H., Y. Shimeno, T. Hachisuka, and K. Tanaka. 1998. “Influence of strain rate on superelastic properties of TiNi shape memory alloy.” Mech. Mater. 30 (2): 141–150. https://doi.org/10.1016/S0167-6636(98)00041-6.
Wang, B., S. Zhu, K. Chen, and J. Huang. 2020a. “Development of superelastic SMA angles as seismic-resistant self-centering devices.” Eng. Struct. 218 (Feb): 110836. https://doi.org/10.1016/j.engstruct.2020.110836.
Wang, B., and S. Y. Zhu. 2018a. “Cyclic tension-compression behavior of superelastic shape memory alloy bars with buckling-restrained devices.” Constr. Build. Mater. 186 (Nov): 103–113. https://doi.org/10.1016/j.conbuildmat.2018.07.047.
Wang, B., and S. Y. Zhu. 2018b. “Superelastic SMA U-shaped dampers with self-centering functions.” Smart Mater. Struct. 27 (5): 055003. https://doi.org/10.1088/1361-665X/aab52d.
Wang, B., S. Y. Zhu, and F. Casciati. 2020b. “Experimental study of novel self-centering seismic base isolators incorporating superelastic shape memory alloys.” J. Struct. Eng. 146 (7): 04020129. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002679.
Wang, B., S. Y. Zhu, C. X. Qiu, and H. Jin. 2019. “High-performance self-centering steel columns with shape memory alloy bolts: Design procedure and experimental evaluation.” Eng. Struct. 182 (1): 446–458. https://doi.org/10.1016/j.engstruct.2018.12.077.
Wolons, D., F. Gandhi, and B. Malovrh. 1998. “Experimental investigation of the pseudoelastic hysteresis damping characteristics of shape memory alloy wires.” J. Intell. Mater. Syst. Struct. 9 (2): 116–126. https://doi.org/10.1177/1045389X9800900205.
Zhang, Y., and A. D. Kiureghian. 1993. “Dynamic-response sensitivity of inelastic structures.” Comput. Methods Appl. Mech. Eng. 108 (1–2): 23–36. https://doi.org/10.1016/0045-7825(93)90151-M.
Zhou, Z., Q. Xie, S. P. Meng, W. Y. Wang, and X. T. He. 2016. “Hysteretic performance analysis of self-centering buckling restrained braces using a rheological model.” J. Eng. Mech. 142 (6): 04016032. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001080.
Zhu, S. Y., and Y. F. Zhang. 2007a. “Seismic behaviour of self-centring braced frame buildings with reusable hysteretic damping brace.” Earthquake Eng. Struct. Dyn. 36 (10): 1329–1346. https://doi.org/10.1002/eqe.683.
Zhu, S. Y., and Y. F. Zhang. 2007b. “A thermomechanical constitutive model for superelastic SMA wire with strain-rate dependence.” Smart Mater. Struct. 16 (5): 1696–1707. https://doi.org/10.1088/0964-1726/16/5/023.
Zhu, S. Y., and Y. F. Zhang. 2008. “Seismic analysis of concentrically braced frame systems with self-centering friction damping braces.” J. Struct. Eng. 134 (1): 121–131. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(121).
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 23, 2020
Accepted: Dec 30, 2020
Published online: Mar 12, 2021
Published in print: May 1, 2021
Discussion open until: Aug 12, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.