Analytical Solution for Cavity Expansion in Rate-Dependent and Strain-Softening Clay and Its Application for CPT Tests
Publication: Journal of Engineering Mechanics
Volume 147, Issue 3
Abstract
This paper incorporated two important characteristics of clay, namely its rate-dependent and strain-softening behavior, into a theoretical framework based on cavity expansion. The modified Tresca model for clay proposed by Einav and Randolph was selected to describe the effects of the rate dependency and gradual softening of clay as it is sheared and remolded. First, the modified Tresca model was reduced to a strain-softening model without considering the rate effect. The exponential degradation (ED) function of the strength reduction proposed by Einav and Randolph was simplified further to a bilinear degradation (SBD) function. This step allowed an approximate closed-form solution to be obtained for the cavity expansion response, including the plastic zone radius, stress distribution, and cavity pressure-expansion relation, of the SBD model. The approximate closed-form solution for the SBD model was compared with the numerical integration solution for the ED model, and the comparison showed that the approximate closed-form solution is relatively accurate. Subsequently, the rate effects were incorporated into the SBD and ED strain-softening models, which are referred to as the rate-dependent (RD)-SBD and RD-ED models. Numerical integration solutions for cavity expansion in the RD-SBD and RD-ED models were obtained. A series of parametric analyses was conducted to investigate the effects of the cavity expansion velocity, strength reduction, and rate-dependent parameters on the cavity expansion responses. A closed-form solution for the limit expansion pressure (LEP) of the cavity expansion was obtained through a simple regression analysis based on the parametric results. The LEP solution was used to interpret the results of the cone penetration test (CPT) test, and a modified expression for the cone penetration resistance factor that incorporates the rate effect and strain softening was given. This simple modification provides a convenient way to evaluate the influence of the two factors on the CPT test results and allows the clay properties to be captured appropriately.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published paper.
Acknowledgments
The work is supported by the National Natural Science Foundation of China, Grant/Award No. 51978105; the Chongqing Youth Top Talent Plan, Grant/Award No. CQYC201905069; and the Chongqing Technology Innovation and Application Development Special General Project, Grant/Award No. cstc2019jscx-msxmX0107.
References
Ali, A., T. Meier, and I. Herle. 2011. “Numerical investigation of undrained cavity expansion in fine-grained soils.” Acta Geotech. 6 (1): 31–40. https://doi.org/10.1007/s11440-011-0133-8.
Biscontin, G., and J. M. Pestana. 2001. “Influence of peripheral velocity on vane shear strength of an artificial clay.” Geotech. Test. J. 24 (4): 423–429. https://doi.org/10.1520/GTJ11140J.
Cao, L. F., C. I. Teh, and M. F. Chang. 2002. “Analysis of undrained cavity expansion in elasto-plastic soils with non-linear elasticity.” Int. J. Numer. Anal. Methods Geomech. 26 (1): 25–52. https://doi.org/10.1002/nag.189.
Casacrande, A., and S. D. Wilson. 1951. “Effect of rate of loading on the strength of clays and shales at constant water content.” Géotechnique 2 (3): 251–263. https://doi.org/10.1680/geot.1951.2.3.251.
Chen, S. L., and Y. N. Abousleiman. 2012. “Exact undrained elastoplastic solution for cylindrical cavity expansion in modified Cam clay soil.” Géotechnique 62 (5): 447–456. https://doi.org/10.1680/geot.11.P.027.
Chen, S. L., and Y. N. Abousleiman. 2013. “Exact drained solution for cylindrical cavity expansion in modified Cam clay soil.” Géotechnique 63 (6): 510–517. https://doi.org/10.1680/geot.11.P.088.
Chen, S. L., and K. Liu. 2019. “Undrained cylindrical cavity expansion in anisotropic critical state soils.” Géotechnique 69 (3): 189–202. https://doi.org/10.1680/jgeot.16.P.335.
Cudmani, R., and V. A. Osinov. 2001. “The cavity expansion problem for the interpretation of cone penetration and pressuremeter tests.” Can. Geotech. J. 38 (3): 622–638. https://doi.org/10.1139/t00-124.
Einav, I., and M. F. Randolph. 2005. “Combining upper bound and strain path methods for evaluating penetration resistance.” Int. J. Numer. Methods Eng. 63 (14): 1991–2016. https://doi.org/10.1002/nme.1350.
Gibson, R. E., and W. F. Anderson. 1961. “In situ measurement of soil properties with the pressuremeter.” Civ. Eng. Public Works Rev. 56 (658): 615–618.
Graham, J., J. H. A. Crooks, and A. L. Bell. 1983. “Time effects on the stress-strain behaviour of natural soft clays.” Géotechnique 33 (3): 327–340. https://doi.org/10.1680/geot.1983.33.3.327.
Hossain, M. S., and M. F. Randolph. 2009. “Effect of strain rate and strain softening on the penetration resistance of spudcan foundations on clay.” Int. J. Geomech. 9 (3): 122–132. https://doi.org/10.1061/(ASCE)1532-3641(2009)9:3(122).
Kelln, C., J. Sharma, D. Hughes, and J. Graham. 2008. “An improved elastic–viscoplastic soil model.” Can. Geotech. J. 45 (10): 1356–1376. https://doi.org/10.1139/T08-057.
Ladanyi, B., and G. H. Johnston. 1974. “Behavior of circular footings and plate anchors embedded in permafrost.” Can. Geotech. J. 11 (4): 531–553. https://doi.org/10.1139/t74-057.
Li, L., J. Li, D. Sun, and W. Gong. 2016. “Analysis of time-dependent bearing capacity of a driven pile in clayey soils by total stress method.” Int. J. Geomech. 17 (7): 04016156. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000860.
Liu, H., H. Zhou, and G. Kong. 2014. “XCC pile installation effect in soft soil ground: A simplified analytical model.” Comput. Geotech. 62 (Oct): 268–282. https://doi.org/10.1016/j.compgeo.2014.07.007.
Low, H., M. Randolph, J. T. Dejong, and N. J. Yafrate. 2008. “Variable rate full-flow penetration tests in intact and remoulded soil.” In Proc., 3rd Int. Conf. on Geotechnical and Geophysical Site Characterization, 1087–1092. London: Taylor & Francis.
Lunne, T., and K. H. Andersen. 2007. “Soft clay shear strength parameters for deepwater geotechnical design.” In Vol. 1 of Proc., 6th Int. Offshore Site Investigation and Geotechnics Conf.: Confronting New Challenges and Sharing Knowledge, 151–176. London: Society for Underwater Technology.
Lunne, T., T. Berre, K. H. Andersen, S. Strandvik, and M. Sjursen. 2006. “Effects of sample disturbance and consolidation procedures on measured shear strength of soft marine Norwegian clays.” Can. Geotech. J. 43 (7): 726–750. https://doi.org/10.1139/t06-040.
Manandhar, S., and N. Yasufuku. 2013. “Vertical bearing capacity of tapered piles in sands using cavity expansion theory.” Soils Found. 53 (6): 853–867. https://doi.org/10.1016/j.sandf.2013.10.005.
Marchetti, S. 1980. “In situ tests by flat dilatometer.” J. Geotech. Geoenviron. Eng. 106 (3): 299–321.
Merifield, R. S., S. W. Sloan, and H. S. Yu. 2001. “Stability of plate anchors in undrained clay.” Géotechnique 51 (2): 141–153. https://doi.org/10.1680/geot.2001.51.2.141.
Mo, P.-Q., X.-W. Gao, W. Yang, and H.-S. Yu. 2020. “A cavity expansion–based solution for interpretation of CPTu data in soils under partially drained conditions.” Int. J. Numer. Anal. Methods Geomech. 44 (7): 1053–1076. https://doi.org/10.1002/nag.3050.
Mo, P.-Q., A. M. Marshall, and H.-S. Yu. 2014. “Elastic-plastic solutions for expanding cavities embedded in two different cohesive-frictional materials.” Int. J. Numer. Anal. Methods Geomech. 38 (9): 961–977. https://doi.org/10.1002/nag.2288.
Mo, P.-Q., A. M. Marshall, and H.-S. Yu. 2016. “Interpretation of cone penetration test data in layered soils using cavity expansion analysis.” J. Geotech. Geoenviron. Eng. 143 (1): 04016084. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001577.
Osinov, V. A., and R. Cudmani. 2001. “Theoretical investigation of the cavity expansion problem based on a hypoplasticity model.” Int. J. Numer. Anal. Methods Geomech. 25 (5): 473–495. https://doi.org/10.1002/nag.138.
Palmer, A. C. 1972. “Undrained plane-strain expansion of a cylindrical cavity in clay—Simple interpretation of pressuremeter test.” Géotechnique 23 (2): 284–292. https://doi.org/10.1680/geot.1972.22.3.451.
Randolph, M. F. 2003. “Science and empiricism in pile foundation design.” Géotechnique 53 (10): 847–875. https://doi.org/10.1680/geot.2003.53.10.847.
Randolph, M. F., J. P. Carter, and C. P. Wroth. 1979. “Driven piles in clay—The effects of installation and subsequent consolidation.” Géotechnique 29 (4): 361–393.
Russell, A. R. 2004. “Cavity expansion in unsaturated soils.” Doctoral dissertation, School of Civil and Environmental Engineering, Univ. of New South Wales.
Shuttle, D. 2007. “Cylindrical cavity expansion and contraction in Tresca soil.” Géotechnique 57 (3): 305–308. https://doi.org/10.1680/geot.2007.57.3.305.
Silvestri, V. 2018. “Theoretical DMT interpretation in sensitive clays.” Geotech. Test. J. 41 (5): 877–889.
Singh, S., and N. R. Patra. 2020. “Axial behaviour of tapered piles using cavity expansion theory.” Acta Geotech. 15 (6): 1619–1636.
Suzuki, Y., and B. M. Lehane. 2015. “Analysis of CPT end resistance at variable penetration rates using the spherical cavity expansion method in normally consolidated soils.” Comput. Geotech. 69 (Sep): 141–152. https://doi.org/10.1016/j.compgeo.2015.04.019.
Vesic, A. C. 1972. “Expansion of cavities in infinite soil mass.” J. Soil Mech. Found. Div. 98 (3): 265–290.
Vesic, A. S. 1977. Design of pile foundations. Washington, DC: Transportation Research Board, National Research Council.
Yasufuku, N., and A. F. L. Hyde. 1995. “Pile end-bearing capacity in crushable sands.” Géotechnique 45 (4): 663–676. https://doi.org/10.1680/geot.1995.45.4.663.
Yin, J.-H., and J. Graham. 1996. “Elastic visco-plastic modelling of one-dimensional consolidation.” Géotechnique 46 (3): 515–527. https://doi.org/10.1680/geot.1996.46.3.515.
Yu, H. S. 2000. Cavity expansion methods in geomechanics. Kluwer Academic.
Yu, H. S., and G. T. Houlsby. 1991. “Finite cavity expansion in dilatants soils: loading analysis.” Géotechnique 41 (2): 173–183. https://doi.org/10.1680/geot.1991.41.2.173.
Zhang, W., D. Wang, M. F. Randolph, and A. M. Puzrin. 2015. “Catastrophic failure in planar landslides with a fully softened weak zone.” Géotechnique 65 (9): 755–769. https://doi.org/10.1680/geot14.P.218.
Zhang, W., D. Wang, M. F. Randolph, and A. M. Puzrin. 2017. “From progressive to catastrophic failure in submarine landslides with curvilinear slope geometries.” Géotechnique 67 (12): 1–16. https://doi.org/10.1680/jgeot.16.P.249.
Zhou, H., G. Kong, P. Li, and H. Liu. 2015. “Flat cavity expansion: Theoretical model and application to the interpretation of the flat dilatometer test.” J. Eng. Mech. 142 (1): 04015058. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000957.
Zhou, H., G. Kong, and H. Liu. 2016. “A semi-analytical solution for cylindrical cavity expansion in elastic–perfectly plastic soil under biaxial in situ stress field.” Géotechnique 66 (7): 584–595. https://doi.org/10.1680/jgeot.15.P.115.
Zhou, H., G. Kong, H. Liu, and L. Laloui. 2018a. “Similarity solution for cavity expansion in thermoplastic soil.” Int. J. Numer. Anal. Methods Geomech. 42 (2): 274–294. https://doi.org/10.1002/nag.2724.
Zhou, H., H. Liu, G. Kong, and Z. Cao. 2014a. “Analytical solution for pressure-controlled elliptical cavity expansion in elastic–perfectly plastic soil.” Geotech. Lett. 4 (2): 72–78. https://doi.org/10.1680/geolett.14.00004.
Zhou, H., H. Liu, G. Kong, and X. Huang. 2014b. “Analytical solution of undrained cylindrical cavity expansion in saturated soil under anisotropic initial stress.” Comput. Geotech. 55 (Jan): 232–239. https://doi.org/10.1016/j.compgeo.2013.09.011.
Zhou, H., H. Liu, and J. Yuan. 2018b. “A novel analytical approach for predicting the noncylindrical pile penetration-induced soil displacement in undrained soil by combining use of cavity expansion and strain path methods.” Int. J. Numer. Anal. Methods Geomech. 42 (11): 1270–1305. https://doi.org/10.1002/nag.2790.
Zhou, H., and M. F. Randolph. 2007. “Computational techniques and shear band development for cylindrical and spherical penetrometers in strain-softening clay.” Int. J. Geomech. 7 (4): 287–295. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:4(287).
Zhou, H., and M. F. Randolph. 2009. “Resistance of full-flow penetrometers in rate-dependent and strain-softening clay.” Géotechnique 59 (2): 79–86. https://doi.org/10.1680/geot.2007.00164.
Zhou, H., J. Yuan, H. Liu, and G. Kong. 2018c. “Analytical model for evaluating XCC pile shaft capacity in soft soil by incorporating penetration effects.” Soils Found. 58 (5): 1093–1112. https://doi.org/10.1016/j.sandf.2018.04.005.
Zhu, J.-G., and J.-H. Yin. 2000. “Strain-rate-dependent stress-strain behaviour of overconsolidated Hong Kong marine clay.” Can. Geotech. J. 37 (6): 1272–1282. https://doi.org/10.1139/t00-054.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 147 • Issue 3 • March 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 12, 2020
Accepted: Dec 3, 2020
Published online: Jan 15, 2021
Published in print: Mar 1, 2021
Discussion open until: Jun 15, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.