Thermodynamic Modeling of the Elastoplastic-Damage Model for Concrete
Publication: Journal of Engineering Mechanics
Volume 147, Issue 4
Abstract
A new coupled damage-plastic constitutive model is presented for modeling the nonlinear behavior of concrete in the small strain space. The active damage tensor concept and the closure effect are presented by considering both the state of the strain and the boundary condition of the crack. A new Helmholtz free energy function (HFEF) is introduced with the existence of a dissipation plastic potential in the stain space. The staggering process between the plastic and damage states has been developed through the HFEF formulation and simultaneously satisfies the consistency conditions. The plastic calculations are formulated in the effective stress regime by developing a 3D plasticity model. The damage surface and damage evolution are formulated based on the accumulated plastic history. The numerical results from the proposed model have been compared with both the experimental data from the literature and with another numerical damage model. Finally, the model exhibits its ability to be applied to analyze various concrete structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some data, models, or code that support the findings of this study are available from the author upon reasonable request. The list of the available codes are as follows:
•
ISO.FOR (generates the stiffness matrix for the IPQS element);
•
STLBSP.FOR (damaged D-matrix and Cauchy total stress);
•
PLAS3D.FOR (PLASTIC stresses for 3D structures); and
•
DAMA3D.FOR (damage calculation for 3D structures).
The output and plot files for the numerical examples are available from the author upon request.
References
Abu Al-Rub, R. K., and G. Z. Voyiadjis. 2003. “On the coupling of anisotropic damage and plasticity models for ductile materials.” Int. J. Solids Struct. 40 (11): 2611–2643. https://doi.org/10.1016/S0020-7683(03)00109-4.
Abu Al-Rub, R. K., and G. Z. Voyiadjis. 2004. “Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments.” Int. J. Plast. 20 (6): 1139–1182. https://doi.org/10.1016/j.ijplas.2003.10.007.
Ahmed, K. 2004. “Numerical modeling of tunnel lining at high temperature using sandwich element.” Ph.D. dissertation, Institute of Architecture and Civil Engineering, Univ. of Innsbruck.
Ananiev, S., and J. Ožbolt. 2004. “Plastic-damage model for concrete in principal directions.” In Fracture mechanics of concrete structures, edited by V. Li, C. K. Y. Leung, K. J. Willam, and S. L. Billington, 271–278. Ithaca, NY: Cornell Univ.
ASTM. 1987. Standard test method for static modulus of elasticity and Poisson ratio of concrete in compression. ASTM C469-87a. West Conshohocken, PA: ASTM.
Badreddine, H., and K. Saanouni. 2017. “On the full coupling of plastic anisotropy and anisotropic ductile damage under finite strains.” Int. J. Damage Mech. 26 (7): 1080–1123. https://doi.org/10.1177/1056789516635729.
Barr, B., S. Hoseinian, and M. Beygi. 2003. “Shrinkage of concrete stored in natural environments.” Cem. Concr. Compos. 25 (1): 19–29. https://doi.org/10.1016/S0958-9465(01)00044-0.
Bazant, Z. P. 1983. “Comment on orthotropic models for concrete and geomaterials.” J. Eng. Mech. 109 (3): 849–865. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:3(849).
Bazant, Z. P., and S. S. Kim. 1979. “Plastic-fracturing theory for concrete.” J. Eng. Mech. Div. 105 (3): 407–428.
Bazant, Z. P., M. R. Tabbara, M. T. Kazemi, and G. Pijaudier-Cabot. 1990. “Random particle model for fracture of aggregate or fiber composites.” J. Eng. Mech. 116 (8): 1686–1704. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:8(1686).
CEB-FIP (Comité Euro-International du Béton and Fédération International de la Précontrainte). 1990. CEB-FIP model code. London: Thomas Telford.
Chaboche, J. L. 1974. “Une loi differenetielle d’endommagement de fatigue avec cumulation non lineaire.” Rev. Fract. Mech. 50: 51.
Chen, Q., Z. Jiang, H. Zhu, J. W. Ju, Z. Yan, H. Li, and T. Rabczuk. 2018. “A multiphase micromechanical model for unsaturated concrete repaired by electrochemical deposition method with the bonding effects.” Int. J. Damage Mech. 27 (9): 1307–1324. https://doi.org/10.1177/1056789518773633.
Chow, C. L., and T. J. Lu. 1989. “On evolution laws of anisotropic damage.” Eng. Fract. Mech. 34 (3): 679–701. https://doi.org/10.1016/0013-7944(89)90130-6.
Cicekli, U., G. Z. Voyiadjis, and R. K. Abu Al-Rub. 2007. “A plasticity and anisotropic damage model for plain concrete.” Int. J. Plast. 23 (10–11): 1874–1900. https://doi.org/10.1016/j.ijplas.2007.03.006.
Dong, Y. S., C. P. Qiao, and L. Sun. 2018. “Microstructural damage evolution and its effect on fracture behavior of concrete subjected to freeze-thaw cycles.” Int. J. Damage Mech. 27 (8): 1272–1288. https://doi.org/10.1177/1056789518787025.
Dragon, A., D. Pham, P. Charlez, and J. F. Shao. 1993. “A model of anisotropic damage by micro crack growth.” In Proc., Int. Symp. on Assessment and Prevention of Failure Phenomena in Rock Engineering, 71–78. Rotterdam, Netherlands: A.A. Balkema.
Gatuingt, F., and G. Pijaudier-Cabot. 2002. “Coupled damage and plasticity modeling in transient dynamic analysis of concrete.” Int. J. Numer. Anal. Methods Geomech. 26 (1): 1–24. https://doi.org/10.1002/nag.188.
Han, D. J., and W. Chen. 1985. “A non-uniform hardening plasticity model for concrete materials.” Mech. Mater. 4 (3–4): 283–302. https://doi.org/10.1016/0167-6636(85)90025-0.
Hansen, N. R., and H. L. Schreyer. 1994. “Thermodynamically consistent framework for theories of elastoplasticity coupled with damage.” Int. J. Solids Struct. 31 (3): 359–389. https://doi.org/10.1016/0020-7683(94)90112-0.
Hayakawa, K., and S. Murakami. 1997. “Thermodynamically modeling of elastic-plastic damage and experimental validation of damage potential.” Int. J. Damage Mech. 6 (4): 333–363. https://doi.org/10.1177/105678959700600401.
Hesebeck, O. 2000. “Irreversibility and maximum dissipation in elastoplastic damage.” Int. J. Damage Mech. 9 (4): 329–351. https://doi.org/10.1106/P5AX-9EK9-40DN-A29F.
Hesebeck, O. 2001. “On an isotropic damage mechanics model for ductile materials.” Int. J. Damage Mech. 10 (4): 325–346. https://doi.org/10.1106/XJBD-LPRG-NOJA-VGDJ.
Ju, J. W. 1989. “On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects.” Int. J. Solids Struct. 25 (7): 803–833. https://doi.org/10.1016/0020-7683(89)90015-2.
Ju, J. W. 1990. “Isotropic and anisotropic damage variables in continuum damage mechanics.” J. Eng. Mech. 116 (12): 2764–2770. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:12(2764).
Kachanov, M. 1958. “Time of the rupture process under creep condition.” IVZ Akad Nauk, S.S.R., Otd Tech Nauk. 8: 26–31.
Karsan, I. D., and J. O. Jirsa. 1969. “Behavior of concrete under compressive loadings.” J. Struct. Div. 95 (12): 2543–2564.
Kiefer, B., T. Waffenschmidt, L. Sprave, and A. Menzel. 2018. “A gradient-enhanced damage model coupled to plasticity—Multi-surface formulation and algorithmic concepts.” Int. J. Damage Mech. 27 (2): 253–295. https://doi.org/10.1177/1056789516676306.
Kratzig, W. B., and R. Polling. 2004. “An elasto-plastic damage model for reinforced concrete with minimum number of material parameters.” Comput. Struct. 82 (15–16): 1201–1215. https://doi.org/10.1016/j.compstruc.2004.03.002.
Kupfer, H., H. K. Hilsdorf, and H. Rusch. 1969. “Behavior of concrete under biaxial stresses.” ACI J. 66 (8): 656–666.
Li, M. Y., Y. J. Cao, W. Q. Shen, and J. F. Shao. 2018. “A damage model of mechanical behavior of porous materials: Application to sandstone.” Int. J. Damage Mech. 27 (9): 1325–1351. https://doi.org/10.1177/1056789516685379.
Li, W. S., and J. Y. Wu. 2018. “A consistent and efficient localized damage model for concrete.” Int. J. Damage Mech. 27 (4): 541–567. https://doi.org/10.1177/1056789516689587.
Liu, D., M. He, and M. Cai. 2018. “A damage model for modeling the complete stress–strain relations of brittle rocks under uniaxial compression.” Int. J. Damage Mech. 27 (7): 1000–1019. https://doi.org/10.1177/1056789517720804.
Lubliner, J., J. Oliver, S. Oller, and E. Oñate. 1989. “A plastic-damage model for concrete.” Int. J. Solids Struct. 25 (3): 299–326. https://doi.org/10.1016/0020-7683(89)90050-4.
Madkour, H. 2004. “Thermodynamic modeling of damage-plasticity for concrete and its application for tunneling.” Ph.D. dissertation, Institute of Architecture and Civil Engineering, Univ. of Innsbruck.
Madkour, H. 2009. “Non-linear analysis of strengthened RC beams with web openings.” Proc. Inst. Civ. Eng. Struct. Build. 162 (2): 115–128. https://doi.org/10.1680/stbu.2009.162.2.115.
Madkour, H. 2010. “Numerical elastoplastic modelling of RC elements.” Ain Shams J. Civ. Eng. 3 (2): 79–103.
McNeice, A. M. 1967. “Elastic–plastic bending of plates and slabs by the finite element method.” Ph.D. thesis, Dept. of Civil and Municipal Engineering, London Univ.
Meschke, G., R. Lackner, and H. Mang. 1998. “An anisotropic elastoplastic–damage model for plain concrete.” Int. J. Numer. Methods Eng. 42 (4): 703–727. https://doi.org/10.1002/(SICI)1097-0207(19980630)42:4%3C703::AID-NME384%3E3.0.CO;2-B.
Murakami, S., K. Hayakawa, and Y. Liu. 1998. “Damage evolution and damage surface of elastic-plastic-damage materials under multiaxial loading.” Int. J. Damage Mech. 7 (2): 103–128. https://doi.org/10.1177/105678959800700202.
Onate, E., S. Oller, S. Oliver, and J. Lubliner. 1988. “A constitutive model of concrete based on the incremental theory of plasticity.” Eng. Comput. 5 (4): 309–319.
Ottosen, N. S. 1977. “A failure criterion for concrete.” Eng. Mech. Div. 103 (4): 527–535.
Putar, F., J. Sorić, T. Lesičar, and Z. Tonković. 2016. “Damage modeling using strain gradient based finite element formulation.” In Proc., VII European Congress on Computational Methods in Applied Sciences and Engineering, edited by M. Papadrakakis, V. Papadopoulos, G. Stefanou, and V. Plevris. Crete Island, Greece: ECCOMAS. https://doi.org/10.7712/100016.2292.7030.
Souza, E. A. A. F. 2002. “A fast, One-equation integration algorithm for the Lemaitre ductile damage model.” Commun. Numer. Methods Eng. 18: 541–554. https://doi.org/10.1002/cnm.511.
Swoboda, G., X. P. Shen, and L. Rosas. 1998. “Damage model for jointed rock mass and its application to tunnel.” Comput. Geotech. 22 (3–4): 183–203. https://doi.org/10.1016/S0266-352X(98)00009-3.
Valanis, K. C. 1978. “Fundamental consequences of a new intrinsic time measure, plasticity as a limit of the endochronic theory.” Arch. Mech. 32 (2): 171–191.
Valanis, K. C. 1990. “A theory of damage in brittle materials.” Eng. Fract. Mech. 36 (3): 403–416. https://doi.org/10.1016/0013-7944(90)90288-R.
Voyiadjis, G. Z., R. K. Abu Al-Rub, and A. N. Palazotto. 2003. “Non-local coupling of viscoplasticity and anisotropic viscodamage for impact problems using the gradient theory.” Arch. Mech. 55 (1): 39–89.
Voyiadjis, G. Z., R. K. Abu Al-Rub, and A. N. Palazotto. 2004. “Thermodynamic framework for coupling of non-local viscoplasticity and non-local anisotropic viscodamage for dynamic localization problems using gradient theory.” Int. J. Plast. 20 (6): 981–1038. https://doi.org/10.1016/j.ijplas.2003.10.002.
Voyiadjis, G. Z., and T. M. Abu-Lebdeh. 1994. “Plasticity model for concrete using the bounding surface concept.” Int. J. Plast. 10 (1): 1–21. https://doi.org/10.1016/0749-6419(94)90051-5.
Voyiadjis, G. Z., N. T. Ziad, and I. K. Peter. 2008. “Anisotropic damage–plasticity model for concrete.” Int. J. Plast. 24 (10): 1946–1965. https://doi.org/10.1016/j.ijplas.2008.04.002.
Wang, T. J. 1995. “Prediction of sheet forming limits using a new continuum damage mechanics criterion for ductile fracture.” Eng. Fract. Mech. 51 (2): 275–279. https://doi.org/10.1016/0013-7944(94)00246-E.
Wissam, D. S. 2015. “Strengthening of reinforced concrete one-way slab with opening using CFRP strip in flexural.” Int. J. Sci. Res. 4 (5): 980–991.
Wu, Y., and J. W. Ju. 2017. “Elastoplastic damage micromechanics for continuous fiber reinforced ductile matrix composites with progressive fiber breakage.” Int. J. Damage Mech. 26 (1): 4–28. https://doi.org/10.1177/1056789516655671.
Yazdani, S., and H. L. Schreyer. 1990. “Combined plasticity and damage mechanics model for plain concrete.” J. Eng. Mech. 116 (7): 1435–1450. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:7(1435).
Zhang, C. A. G. D. 1995. “A cohesive plastic/damage-zone model for ductile crack analysis.” Nucl. Eng. Des. 158 (2–3): 319–331. https://doi.org/10.1016/0029-5493(95)01039-K.
Zhang, W. A. V. S. 1998. “Continuum damage mechanics theory and application.” Int. J. Damage Mech. 7 (3): 250–273. https://doi.org/10.1177/105678959800700303.
Zhang, W. H. 1992. “Numerical analysis of continuous damage mechanics.” Ph.D. dissertation, School of Civil Engineering, Univ. of New South Wales.
Zhu, Y. Y., and S. Cescotto. 1995. “A fully coupled elastovisco-plastic damage theory for anisotropic materials.” Int. J. Solids Struct. 32 (11): 1607–1641. https://doi.org/10.1016/0020-7683(94)00195-3.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jun 18, 2020
Accepted: Nov 3, 2020
Published online: Jan 30, 2021
Published in print: Apr 1, 2021
Discussion open until: Jun 30, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.