Stability Analysis of Real-Time Hybrid Simulation with Time-Varying Delay through a Delay Decomposition Approach
Publication: Journal of Engineering Mechanics
Volume 146, Issue 10
Abstract
Stability of real-time hybrid simulation (RTHS) has attracted considerable attention given that actuator delay might destabilize the real-time test, especially when the compensation is not sufficient. Previous research by the authors explored the stability of RTHS with time-varying delay, but the derived stability criteria are relatively conservative due to the application of the Lyapunov-Krasovskii (L-K) theory. For overcoming such defect and pursuing a more accurate stability analysis, this study introduces a delay decomposition approach to reduce the conservatism of matrix inequality with convexity property. For both constant- and time-varying delay systems, the delay decomposition approach performed remarkably in stability analysis. Moreover, with the increase in number of decomposition, this approach can further improve the accuracy of analysis results and reduce its conservatism; however, the computational efforts will rise rapidly. Computational simulation verified the effectiveness of the delay decomposition approach especially for the physical substructure involving a small stiffness ratio.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request, including all data, models and code.
Acknowledgments
The research described in this paper was financially supported by the National Natural Science Foundation of China, No. 51678147, and the Fundamental Research Funds for the Central Universities, No. JZ2020HGQA0203.
References
Borwein, J., and A. S. Lewis. 2010. Convex analysis and nonlinear optimization: Theory and examples. New York: Springer Science & Business Media.
Botelho, R. M., and R. E. Christenson. 2015. “Robust stability and performance analysis for multi-actuator real-time hybrid substructuring.” In Vol. 4 of Dynamics of coupled structures, 1–7. Cham, Switzerland: Springer.
Boyd, S., L. El Ghaoui, E. Feron, and V. Balakrishnan. 1994. Vol. 15 of Linear matrix inequalities in system and control theory. Philadelphia: Society for Industrial and Applied Mathematics.
Carrion, J. E., and B. F. Spencer Jr. 2007. Model-based strategies for real-time hybrid testing. Champaign, IL: Univ. of Illinois at Urbana-Champaign.
Chae, Y., K. Kazemibidokhti, and J. M. Ricles. 2013. “Adaptive time series compensator for delay compensation of servo-hydraulic actuator systems for real-time hybrid simulation.” Earthquake Eng. Struct. Dyn. 42 (11): 1697–1715. https://doi.org/10.1002/eqe.2294.
Chen, C., and J. M. Ricles. 2008. “Stability analysis of SDOF real-time hybrid testing systems with explicit integration algorithms and actuator delay.” Earthquake Eng. Struct. Dyn. 37 (4): 597–613. https://doi.org/10.1002/eqe.775.
Chen, C., and J. M. Ricles. 2010. “Tracking error-based servohydraulic actuator adaptive compensation for real-time hybrid simulation.” J. Struct. Eng. 136 (4): 432–440. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000124.
Chen, C., J. M. Ricles, and T. Guo. 2012. “Improved adaptive inverse compensation technique for real-time hybrid simulation.” J. Eng. Mech. 138 (12): 1432–1446. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000450.
Chen, C., J. M. Ricles, R. Sause, and R. Christenson. 2010. “Experimental evaluation of an adaptive inverse compensation technique for real-time simulation of a large-scale magneto-rheological fluid damper.” Smart Mater. Struct. 19 (2): 025017. https://doi.org/10.1088/0964-1726/19/2/025017.
Chen, P. C., and K. C. Tsai. 2013. “Dual compensation strategy for real-time hybrid testing.” Earthquake Eng. Struct. Dyn. 42 (1): 1–23. https://doi.org/10.1002/eqe.2189.
Christenson, R., Y. Z. Lin, A. Emmons, and B. Bass. 2008. “Large-scale experimental verification of semiactive control through real-time hybrid simulation.” J. Struct. Eng. 134 (4): 522–534. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:4(522).
Combescure, D., and P. Pegon. 1997. “α-Operator splitting time integration technique for pseudodynamic testing error propagation analysis.” Soil Dyn. Earthquake Eng. 16 (7): 427–443. https://doi.org/10.1016/S0267-7261(97)00017-1.
Dorf, R. C., and R. H. Bishop. 2011. Modern control systems. London: Pearson.
Friedman, A., et al. 2015. “Large-scale real-time hybrid simulation for evaluation of advanced damping system performance.” J. Struct. Eng. 141 (6): 04014150. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001093.
Gouaisbaut, F., and D. Peaucelle. 2006. “Delay-dependent stability analysis of linear time delay systems.” IFAC Proc. Volumes 39 (10): 54–59. https://doi.org/10.3182/20060710-3-IT-4901.00010.
Gu, K. 2000. “An integral inequality in the stability problem of time-delay systems.” In Vol. 3 of Proc., 39th IEEE Conf. on Decision and Control (Cat. No. 00CH37187), 2805–2810. New York: IEEE.
Gu, K., J. Chen, and V. L. Kharitonov. 2003. Stability of time-delay systems. New York: Springer Science & Business Media.
Han, Q. L. 2005. “Absolute stability of time-delay systems with sector-bounded nonlinearity.” Automatica 41 (12): 2171–2176. https://doi.org/10.1016/j.automatica.2005.08.005.
Han, Q. L. 2009. “A discrete delay decomposition approach to stability of linear retarded and neutral systems.” Automatica 45 (2): 517–524. https://doi.org/10.1016/j.automatica.2008.08.005.
Horiuchi, T., M. Inoue, T. Konno, and Y. Namita. 1999. “Real-time hybrid experimental system with actuator delay compensation and its application to a piping system with energy absorber.” Earthquake Eng. Struct. Dyn. 28 (10): 1121–1141. https://doi.org/10.1002/(SICI)1096-9845(199910)28:10%3C1121::AID-EQE858%3E3.0.CO;2-O.
Horiuchi, T., and T. Konno. 2001. “A new method for compensating actuator delay in real-time hybrid experiments.” Philos. Trans. R. Soc. London, Ser. A 359 (1786): 1893–1909. https://doi.org/10.1098/rsta.2001.0878.
Huang, L., C. Chen, M. H. Chen, and T. Guo. 2020. “Effect of time-varying delay on stability of real-time hybrid simulation with multiple experimental substructures.” J. Earthquake Eng. 1–26. https://doi.org/10.1080/13632469.2019.1688735.
Huang, L., C. Chen, T. Guo, and M. H. Chen. 2019. “Stability analysis of real-time hybrid simulation for time-varying actuator delay using the Lyapunov-Krasovskii functional approach.” J. Eng. Mech. 145 (1): 04018124. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001550.
Huang, L., T. Guo, C. Chen, and M. Chen. 2018. “Restoring force correction based on online discrete tangent stiffness estimation method for real-time hybrid simulation.” Earthquake Eng. Eng. Vib. 17 (4): 805–820. https://doi.org/10.1007/s11803-018-0477-2.
Maghareh, A., S. J. Dyke, A. Prakash, and J. F. Rhoads. 2014. “Establishing a stability switch criterion for effective implementation of real-time hybrid simulation.” Smart Struct. Syst. 14 (6): 1221–1245. https://doi.org/10.12989/sss.2014.14.6.1221.
Maghareh, A., S. J. Dyke, S. Rabieniaharatbar, and A. Prakash. 2017. “Predictive stability indicator: A novel approach to configuring a real-time hybrid simulation.” Earthquake Eng. Struct. Dyn. 46 (1): 95–116. https://doi.org/10.1002/eqe.2775.
Meng, H., K. Yu, and D. Zhai. 2013. “Delay-dependent criteria for robust stability of linear systems with time-varying delay.” J. Univ. Sci. Technol. China 43 (7): 523–531. https://doi.org/10.3969/j.issn.0253-2778.2013.07.002.
Meng, H. F. 2013. Study on several stability problems of linear retarded systems. Hefei, China: Univ. of Science and Technology of China.
Mercan, O., and J. M. Ricles. 2007. “Stability and accuracy analysis of outer loop dynamics in real-time pseudodynamic testing of SDOF systems.” Earthquake Eng. Struct. Dyn. 36 (11): 1523–1543. https://doi.org/10.1002/eqe.701.
Mercan, O., and J. M. Ricles. 2008. “Stability analysis for real-time pseudodynamic and hybrid pseudodynamic testing with multiple sources of delay.” Earthquake Eng. Struct. Dyn. 37 (10): 1269–1293. https://doi.org/10.1002/eqe.814.
Moon, Y. S., P. Park, W. H. Kwon, and Y. S. Lee. 2001. “Delay-dependent robust stabilization of uncertain state-delayed systems.” Int. J. Control 74 (14): 1447–1455. https://doi.org/10.1080/00207170110067116.
Mosalam, K. M., and S. Günay. 2014. “Seismic performance evaluation of high voltage disconnect switches using real-time hybrid simulation. I: System development and validation.” Earthquake Eng. Struct. Dyn. 43 (8): 1205–1222. https://doi.org/10.1002/eqe.2395.
Mosqueda, G., B. Stojadinovic, and S. A. Mahin. 2007. “Real-time error monitoring for hybrid simulation. I: Methodology and experimental verification.” J. Struct. Eng. 133 (8): 1100–1108. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:8(1100).
Nakashima, M., T. Kaminosomo, M. Ishida, and K. Ando. 1990. “Integration techniques for substructure pseudo dynamic test.” In Vol. 2 of Proc., 4th US National Conf. on Earthquake Engineering, 515–524. Palm Springs, CA: Earthquake Engineering Research Institute.
Nakashima, M., H. Kato, and E. Takaoka. 1992. “Development of real-time pseudo dynamic testing.” Earthquake Eng. Struct. Dyn. 21 (1): 79–92. https://doi.org/10.1002/eqe.4290210106.
Pan, P., M. Nakashima, and H. Tomofuji. 2005. “Online test using displacement-force mixed control.” Earthquake Eng. Struct. Dyn. 34 (8): 869–888. https://doi.org/10.1002/eqe.457.
Park, P. 1999. “A delay-dependent stability criterion for systems with uncertain time-invariant delays.” IEEE Trans. Autom. Control 44 (4): 876–877. https://doi.org/10.1109/9.754838.
Park, P., J. W. Ko, and C. Jeong. 2011. “Reciprocally convex approach to stability of systems with time-varying delays.” Automatica 47 (1): 235–238. https://doi.org/10.1016/j.automatica.2010.10.014.
Seuret, A., F. Gouaisbaut, and E. Fridman. 2013. “Stability of systems with fast-varying delay using improved Wirtinger’s inequality.” In Proc., 52nd IEEE Conf. on Decision and Control, 946–951. New York: IEEE.
Shao, H. 2009. “New delay-dependent stability criteria for systems with interval delay.” Automatica 45 (3): 744–749. https://doi.org/10.1016/j.automatica.2008.09.010.
Wallace, M. I., J. Sieber, S. A. Neild, D. J. Wagg, and B. Krauskopf. 2005. “Stability analysis of real-time dynamic substructuring using delay differential equation models.” Earthquake Eng. Struct. Dyn. 34 (15): 1817–1832. https://doi.org/10.1002/eqe.513.
Wang, H. Q., R. R. Shi, C. G. Yang, X. P. Dong, and L. Yao. 2011. “On stability criteria of a class of systems with time-varying delays.” [In Chinese.] J. Hefei Univ. Technol. 34 (8): 1146–1149. https://doi.org/10.3969/j.issn.1003-5060.2011.08.007.
Wu, M., Y. He, J. H. She, and G. P. Liu. 2004. “Delay-dependent criteria for robust stability of time-varying delay systems.” Automatica 40 (8): 1435–1439. https://doi.org/10.1016/j.automatica.2004.03.004.
Zhang, Z., B. Basu, and S. R. Nielsen. 2016. “Real-time hybrid simulation technique for performance evaluation of full-scale sloshing dampers in wind turbines.” J. Phys. Conf. Ser. 753 (8): 082021. https://doi.org/10.1088/1742-6596/753/8/082021.
Zhu, F., J. T. Wang, F. Jin, F. D. Chi, and Y. Gui. 2015. “Stability analysis of MDOF real-time dynamic hybrid testing systems using the discrete-time root locus technique.” Earthquake Eng. Struct. Dyn. 44 (2): 221–241. https://doi.org/10.1002/eqe.2467.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Nov 7, 2019
Accepted: Apr 24, 2020
Published online: Jul 16, 2020
Published in print: Oct 1, 2020
Discussion open until: Dec 16, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.