Monotonic Expression of Polynomial Normal Transformation Based on the First Four L-Moments
Publication: Journal of Engineering Mechanics
Volume 146, Issue 7
Abstract
Structural reliability analysis without the exclusion of random variables with unknown distributions has attracted increasing attention, and many endeavors have been devoted to this aspect. Recently, linear moments (L-moments) have been found increasing use for characterizing random variables with unknown distributions, in part since they show less sensitivity to distribution tails and are more stable than the ordinary central moments (C-moments). In this paper, the clear definition of the complete monotonic expressions of the third-order polynomial normal transformation (TPNT) under different combinations of the first four L-moments of random variables is first proposed. Additionally, the applicable boundaries and monotonic regions of TPNT based on L-moments are also determined. The advantages of the TPNT based on L-moments are that it has a wider applicable range and is much more stable under a small sample size compared with the TPNT based on C-moments, which are demonstrated through numerical example studies. Through the numerical examples, the proposed TPNT based on the first four L-moments is found to be quite effective for normal transformation.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
The study is partially supported by the National Natural Science Foundation of China (Grant Nos. 51820105014, 51738001, and U1934217), and the Fundamental Research Funds for the Central Universities of Central South University (No. 2019zzts286). The support is gratefully acknowledged.
References
Ang, A. H.-S., and W. H. Tang. 1984. Probability concepts in engineering planning and design, vol. II: Decision, risk, and reliability. New York: Wiley.
Cai, G. Q., and I. Elishakoff. 1994. “Refined second-order reliability analysis.” Struct. Saf. 14 (4): 267–276. https://doi.org/10.1016/0167-4730(94)90015-9.
Chen, X. Y., and Y. K. Tung. 2003. “Investigation of polynomial normal transform.” Struct. Saf. 25 (4): 423–445. https://doi.org/10.1016/S0167-4730(03)00019-5.
Choi, M., and B. Sweetman. 2010. “The Hermite moment model for highly skewed response with application to tension leg platforms.” J. Offshore Mech. Arct. Eng. 132 (2): 021602. https://doi.org/10.1115/1.4000398.
David, H. A. 1981. Order statistics. 2nd ed. New York: Wiley.
Ditlevsen, O., and H. O. Madsen. 1996. Structural reliability methods. New York: Wiley.
Fleishman, A. I. 1978. “A method for simulating non-normal distributions.” Psychometrika 43 (4): 521–532. https://doi.org/10.1007/BF02293811.
Gao, S., X. Y. Zheng, and Y. Huang. 2017. “Hybrid C- and L-moment–based Hermite transformation models for non-Gaussian processes.” J. Eng. Mech. 144 (2): 04017179. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001408.
Hohenbichler, M., and R. Rackwitz. 1981. “Non-normal dependent vectors in structural safety.” J. Eng. Mech. Div. 107 (6): 1227–1238.
Hosking, J. R. M. 1990. “L-moments: Analysis and estimation of distributions using linear combinations of order statistics.” J. R. Stat. Soc. Ser. B 52 (1): 105–124. https://doi.org/10.1111/j.2517-6161.1990.tb01775.x.
Hosking, J. R. M., and J. R. Wallis. 1997. Regional frequency analysis: An approach based on L-moments. Cambridge, UK: Cambridge University Press.
Liu, P. L., and A. Der Kiureghian. 1986. “Multivariate distribution models with prescribed marginals and covariances.” Probab. Eng. Mech. 1 (2): 105–112. https://doi.org/10.1016/0266-8920(86)90033-0.
MacKenzie, C. A., and S. R. Winterstein. 2011. “Comparing L-moments and conventional moments to model current speeds in the North Sea.” In Proc., 2011 Industrial Engineering Research Conf., Institute of Industrial Engineering Annual Meeting. Norcross, GA: Institute of Industrial and Systems Engineers.
Melchers, R. E., and A. T. Beck. 2018. Structural reliability analysis and prediction. Hoboken, NJ: Wiley.
Pandey, M. D., P. H. A. J. M. Van Gelder, and J. K. Vrijling. 2001. “The estimation of extreme quantiles of wind velocity using L-moments in the peaks-over-threshold approach.” Struct. Saf. 23 (2): 179–192. https://doi.org/10.1016/S0167-4730(01)00012-1.
Sankarasubramanian, A., and K. Srinivasan. 1999. “Investigation and comparison of sampling properties of L-moments and conventional moments.” J. Hydrol. 218 (1–2): 13–34. https://doi.org/10.1016/S0022-1694(99)00018-9.
Shinozuka, M. 1983. “Basic analysis of structural safety.” J. Struct. Eng. 109 (3): 721–740. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:3(721).
Tung, Y. K. 2000. “Polynomial normal transformation in uncertainty analysis.” Appl. Probab. Stat. 1: 167–174.
Winterstein, S. R., and C. A. Mackenzie. 2013. “Extremes of nonlinear vibration: Comparing models based on moments, L-moments, and maximum entropy.” J. Offshore Mech. Arct. Eng. 135 (2): 185–195. https://doi.org/10.1115/1.4007050.
Zhang, X. Y., Y. G. Zhao, and Z. H. Lu. 2019. “Unified Hermite polynomial model and its application in estimating non-Gaussian processes.” J. Eng. Mech. 145 (3): 04019001. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001577.
Zhao, Y. G., and Z. H. Lu. 2008. “Cubic normal distribution and its significance in structural reliability.” Struct. Eng. Mech. 28 (3): 263–280. https://doi.org/10.12989/sem.2008.28.3.263.
Zhao, Y. G., and T. Ono. 2001. “Moment methods for structural reliability.” Struct. Saf. 23 (1): 47–75. https://doi.org/10.1016/S0167-4730(00)00027-8.
Zhao, Y. G., X. Y. Zhang, and Z. H. Lu. 2018a. “Complete monotonic expression of the fourth-moment normal transformation for structural reliability.” Comput. Struct. 196 (11): 186–199. https://doi.org/10.1016/j.compstruc.2017.11.006.
Zhao, Y. G., X. Y. Zhang, and Z. H. Lu. 2018b. “A flexible distribution and its application in reliability engineering.” Reliab. Eng. Syst. Saf. 176 (Aug): 1–12. https://doi.org/10.1016/j.ress.2018.03.026.
Zwillinger, D. 2018. CRC standard mathematical tables and formulae. 32nd ed. Boca Raton, FL: CRC Press.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Apr 17, 2019
Accepted: Jan 13, 2020
Published online: Apr 18, 2020
Published in print: Jul 1, 2020
Discussion open until: Sep 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.